Problem with stitches on Quantum Stylist 9960
08-27-2015, 10:10 AM
#1
Member
Thread Starter
Join Date: Aug 2015
Posts: 2
Problem with stitches on Quantum Stylist 9960
hi! 
I have this Quantum Stylist 9960 and lately it started doing this weird stitching on the bottom side. I've tried all sorts of tension settings to no avail.
I mainly use felt and polyester/cotton thread.
Let me show you what it does with a couple of pictures.
Would you know how to solve this issue?
And thank you very much in advance
I have this Quantum Stylist 9960 and lately it started doing this weird stitching on the bottom side. I've tried all sorts of tension settings to no avail.
I mainly use felt and polyester/cotton thread.
Let me show you what it does with a couple of pictures.
Would you know how to solve this issue?
And thank you very much in advance
08-27-2015, 10:41 AM
#3
Power Poster
Join Date: Dec 2008
Location: Western Wisconsin
Posts: 12,930
In the red felt photo, is gray the bottom thread and brown the top thread?
What is happening is glitchy tension. The tension is correct for awhile, then the top thread (brown) starts getting pulled to the bottom. I agree with cleaning the entire bobbin area and changing the needle. Be sure to clean any lint out from the feed dogs too.
Not sure what kind of bobbin case this machine has. If it is a removable bobbin case, run your finger around the case and inside the machine, around the needle hole, etc. to see if you can feel a burr. Also feel the old needle for a burr. My guess is that the bottom thread is intermittently catching on something, increasing the tension on the bobbin thread, which in turn pulls the top thread to the bottom. If it's a top-loading bobbin, run your finger around the bobbin area to see if you can feel a burr. Burrs can be smoothed out with the finest sandpaper your hardware store has (emery cloth).
If the top thread was catching intermittently somewhere along the thread path or in the top tension guides, the bottom thread would be showing on the top like that.
The best way to set a balanced tension on a machine is to do it with a zigzag stitch, as the zigzag shows up any imbalances.
On the blue felt picture, is the white thread the bottom thread? If so, either the top tension is too loose or the bottom tension is too tight, as the dark (top) thread is being pulled underneath to make those dots.
What is happening is glitchy tension. The tension is correct for awhile, then the top thread (brown) starts getting pulled to the bottom. I agree with cleaning the entire bobbin area and changing the needle. Be sure to clean any lint out from the feed dogs too.
Not sure what kind of bobbin case this machine has. If it is a removable bobbin case, run your finger around the case and inside the machine, around the needle hole, etc. to see if you can feel a burr. Also feel the old needle for a burr. My guess is that the bottom thread is intermittently catching on something, increasing the tension on the bobbin thread, which in turn pulls the top thread to the bottom. If it's a top-loading bobbin, run your finger around the bobbin area to see if you can feel a burr. Burrs can be smoothed out with the finest sandpaper your hardware store has (emery cloth).
If the top thread was catching intermittently somewhere along the thread path or in the top tension guides, the bottom thread would be showing on the top like that.
The best way to set a balanced tension on a machine is to do it with a zigzag stitch, as the zigzag shows up any imbalances.
On the blue felt picture, is the white thread the bottom thread? If so, either the top tension is too loose or the bottom tension is too tight, as the dark (top) thread is being pulled underneath to make those dots.
Last edited by Prism99; 08-27-2015 at 10:43 AM.
08-27-2015, 12:48 PM
#4
Power Poster
Join Date: Mar 2011
Location: Ontario, Canada
Posts: 41,481
From the straight stitches the tension is not balanced. You will have to play with the tension until the stitch is formed in the center of the felt and not pulled to the top or the bottom. As others have said clean your bobbin area, replace needle etc.
08-31-2015, 11:56 AM
#5
Member
Thread Starter
Join Date: Aug 2015
Posts: 2
Thank you so much for your help everyone!
I will attempt the clean the machine a bit more and perhaps in a few places I haven't reached yet after dismantling the machine. I'll also try out different bobbins, fabrics and threads to compare the results. And finally i'll try to fiddle with the tension settings a bit more.
Again, thank you so much!
I will attempt the clean the machine a bit more and perhaps in a few places I haven't reached yet after dismantling the machine. I'll also try out different bobbins, fabrics and threads to compare the results. And finally i'll try to fiddle with the tension settings a bit more.
Again, thank you so much!
Thread
Thread Starter
Forum
Replies
Last Post
kelsunshine
Main
3
02-22-2014 09:55 PM
coffeebreak
Main
4
11-19-2012 09:48 PM
