Go Back  Quiltingboard Forums >
  • Main
  • Using Your Ruler, Squaring Up a Block >
  • Using Your Ruler, Squaring Up a Block

  • Using Your Ruler, Squaring Up a Block

    Thread Tools
     
    Old 03-16-2015, 09:25 AM
      #1  
    Super Member
    Thread Starter
     
    Join Date: Sep 2011
    Location: Mendocino Coast, CA
    Posts: 4,893
    Default Using Your Ruler, Squaring Up a Block

    As I just now finished squaring up my last and 72nd block for the current quilt I'm doing...ahhhh....done. I thought I'd ask everyone else how they square up their blocks and what kinds of tricks with their rulers do they use? I'm working on a, simple, old fashioned, log cabin quilt right now, so there's lots of seams and marks that I can line up my ruler with. I use every dot, dash, number, diagonal line, etc. that I can on my ruler. It amazes me how many marks there actually are.

    For example, with the log cabin pattern, I do the following:
    - Use a small, square ruler, which has all the marks I need, instead of a rectangular one.
    - Run the diagonal line through the corners of the, "chimney."
    - I can also measure the last couple of, "logs," and trim off at the 3/4" mark.
    - I add white dots with my correction pen to the ruler at the most used marks to make things go faster.

    Other things that I do when making a block are:
    - "Split the difference" when something doesn't align properly.
    - Finger press instead of using the iron to reduce distortion and save time.

    I'm sure there are a lot of other small ideas out there that can make a big difference. What do you do?

    ~ Cindy
    tropit is offline  
    Old 03-16-2015, 09:55 AM
      #2  
    Power Poster
     
    nativetexan's Avatar
     
    Join Date: Feb 2009
    Location: home again, after 27 yrs!
    Posts: 19,388
    Default

    I always use a ruler with a 45 degree line and place that on one corner to the opposite one. trim the two sides and flip block and place again, and trimming the other two sides if necessary. Makes a nice even center block every time.
    nativetexan is offline  
    Old 03-16-2015, 11:44 AM
      #3  
    Senior Member
     
    Join Date: Mar 2011
    Posts: 602
    Default

    I don't care how hard I try, or what size seam I use, 1/4" or scant 1/4", my squares NEVER turn out to be the size they're suppose to be. For example, right now I'm in the process of making snowball squares out of 5" charms. Most, but not all, measure 5", some however, are 4-1/2", or 4-3/4" square. I finally gave up trying to be so accurate. If not trimming a block to the perfect size is good enough for Fons and Porter, it's good enough for me!
    oh munner is offline  
    Old 03-16-2015, 11:51 AM
      #4  
    Super Member
     
    GingerK's Avatar
     
    Join Date: Jul 2010
    Location: Ontario, Canada
    Posts: 3,526
    Default

    I found that I did a better job on log cabin blocks if I took the time to square up after adding each round. I also use my 45 degree line and have been known to fudge the seam if a block is a hair smaller than needed. I think the thing that takes the most time to do but ends up saving the most time in the long run, is to mark exactly where each block begins and ends on sashing and borders. It also helps to keep the blocks in alignment if I am not using cornerstones. I do follow the old carpenter's axiom: Measure twice, cut once.
    GingerK is offline  
    Old 03-16-2015, 11:53 AM
      #5  
    Super Member
     
    GingerK's Avatar
     
    Join Date: Jul 2010
    Location: Ontario, Canada
    Posts: 3,526
    Default

    Oh Munner, have you measured the charm squares BEFORE turning them into snowball blocks? I have found that not all charm squares and layer cakes are created equal--in size that is.
    GingerK is offline  
    Old 03-16-2015, 11:54 AM
      #6  
    Power Poster
     
    Join Date: Jun 2011
    Location: Southern California
    Posts: 19,127
    Default

    When I did log cabins, I always found I was short just a hair so my outside fabrics I cut 1/8" wider so that I could trim them down perfectly to the size they should be.
    ManiacQuilter2 is offline  
    Old 03-16-2015, 01:51 PM
      #7  
    Power Poster
     
    QuiltnNan's Avatar
     
    Join Date: Mar 2011
    Location: western NY formerly MN, FL, NC, SC
    Posts: 51,430
    Default

    thanks for all the hints... i put a sticky on the ruler at the point i want to line up so i don't have to squint for the numbers
    QuiltnNan is offline  
    Old 03-16-2015, 01:59 PM
      #8  
    Super Member
     
    juneayerza's Avatar
     
    Join Date: Mar 2010
    Location: Clovis California
    Posts: 2,259
    Default

    I'm like you, I square each block or else I'm so out of whack at the end that it can't get squared. That is one reason I paper piece as much as I can so the blocks are square almost automatically.
    juneayerza is offline  
    Old 03-16-2015, 07:22 PM
      #9  
    Super Member
     
    Join Date: Jun 2010
    Location: The Deep South near Cajun Country, USA
    Posts: 5,410
    Default

    I find I am more careful about squaring if I consider the project as "special". Right now I am sewing a pre-cut kit where parts of it is missing and I don't seem to care about squaring anything. It's mostly HST's that had already been cut as triangles. I do still iron everything carefully, and ironically, after I checked the center medallion's first four rounds, I am within 1/4" for every side at 36 1/4". I did trim one small edge of an HST that bowed out.

    When I do square I do it by centering the 45 degree on the center of the block with whatever square ruler I am using. I have all sizes. My favorite is my 6.5". Next is the 12.5", although the 8.5 & the 10.5 do get used every once in a while. I trim any and all sides that are oversized. There are fun times when I get to rip a block back up and make those seams smaller to bring it up to size. I fudge one way or the other if I have to.
    Barb in Louisiana is offline  
    Old 03-17-2015, 04:32 AM
      #10  
    Power Poster
     
    Jingle's Avatar
     
    Join Date: Dec 2009
    Location: Outside St. Louis
    Posts: 38,213
    Default

    I learned the hard way to trim each square as I go. Makes it look better when done. I am making a variation now. Heartstrings 45 x 45" I need to add to it to make it 45 x 65" Crib size. The pattern is in Log Cabin Fever by Evelyn Sloopy OR Sloppy. I don't remember the right spelling of her last name.
    Jingle is offline  
    Related Topics
    Thread
    Thread Starter
    Forum
    Replies
    Last Post
    cassiemae
    Main
    10
    09-04-2008 06:23 PM
    Barb V
    Main
    6
    04-25-2007 06:18 AM

    Posting Rules
    You may not post new threads
    You may not post replies
    You may not post attachments
    You may not edit your posts

    BB code is On
    Smilies are On
    [IMG] code is On
    HTML code is On
    Trackbacks are Off
    Pingbacks are Off
    Refbacks are Off



    FREE Quilting Newsletter