CASSEROLE CARRIER
11-15-2010, 03:09 PM
#1
Power Poster
Thread Starter
Join Date: Feb 2009
Location: home again, after 27 yrs!
Posts: 19,388
I tried earlier to make this but started with 31 inch square and it was going to be much too large. Amandasgrandmama gave me the measurements and this is now the finished product.
this goes with the placemats and coasters i made before-
http://www.quiltingboard.com/t-73708-1.htm
this goes with the placemats and coasters i made before-
http://www.quiltingboard.com/t-73708-1.htm
carrier as would look in use
[ATTACH=CONFIG]127013[/ATTACH]
peek inside of it
[ATTACH=CONFIG]127014[/ATTACH]
11-15-2010, 05:14 PM
#8
Power Poster
Thread Starter
Join Date: Feb 2009
Location: home again, after 27 yrs!
Posts: 19,388
"Okay --The cutting instructions say cut two 24 inch squares for the carrier (both pieces) and 1 four inch wide X 44 inch strip for carrier strap and loops. From heat resistant fab, cut one 21 inch square."
this is what amandasgramamma told me. mine was probably a bit smaller than 24 inches square, maybe 22.
here's pics of amandasgramama's -
http://www.quiltingboard.com/t-21943-1.htm
Featherweight here is the one who showed me one she'd made and i did it from what i remembered.
this is what amandasgramamma told me. mine was probably a bit smaller than 24 inches square, maybe 22.
here's pics of amandasgramama's -
http://www.quiltingboard.com/t-21943-1.htm
Featherweight here is the one who showed me one she'd made and i did it from what i remembered.
Thread
Thread Starter
Forum
Replies
Last Post
craftybear
Links and Resources
10
03-07-2012 07:21 PM
