Bobbin winder tire?
#2
Junior Member
Join Date: May 2018
Posts: 266
![Default](/images/icons/icon1.gif)
http://www.needlebar.org/main/manual...ol/2index.html
Not sure if this is the model you are looking for. Is the Eldredge sewing machine the one that uses a spool of thread for the bobbin? What a cool feature.
Not sure if this is the model you are looking for. Is the Eldredge sewing machine the one that uses a spool of thread for the bobbin? What a cool feature.
#3
Member
Thread Starter
Join Date: Sep 2021
Posts: 6
![Default](/images/icons/icon1.gif)
http://www.needlebar.org/main/manual...ol/2index.html
Not sure if this is the model you are looking for. Is the Eldredge sewing machine the one that uses a spool of thread for the bobbin? What a cool feature.
Not sure if this is the model you are looking for. Is the Eldredge sewing machine the one that uses a spool of thread for the bobbin? What a cool feature.
#4
![Default](/images/icons/icon1.gif)
Welcome to Quilting Board. It appears that you have a machine similar to the ones seen at http://www.doubleveil.net/zssmp/expertbt.htm and there is a manual at the top of the page for those machines, which has oiling instructions. As for the bobbin winder tire, I'm thinking that it would take a #2460 as for some of the other National machines as seen on http://www.doubleveil.net/zssmp/reversew.htm
The Eldredge E uses 20x1 needles which are longer than the 15x1 needles that are currently available. Sometimes you can find 20x1 needles on eBay. Many have used the modern needles on machines like this by dropping the needle a bit from the stop. Someone, on another forum (titled "15x1 rather than 20x1 needles"), used a sheet magnet cut to fit inside the needle bar in order to have the 15x1 needle stop at the proper position.
Janey - Neat people never make the exciting discoveries I do.
Not affiliated with off-site link(s)
The Eldredge E uses 20x1 needles which are longer than the 15x1 needles that are currently available. Sometimes you can find 20x1 needles on eBay. Many have used the modern needles on machines like this by dropping the needle a bit from the stop. Someone, on another forum (titled "15x1 rather than 20x1 needles"), used a sheet magnet cut to fit inside the needle bar in order to have the 15x1 needle stop at the proper position.
Janey - Neat people never make the exciting discoveries I do.
Not affiliated with off-site link(s)
#7
![Default](/images/icons/icon1.gif)
![](https://cdn.quiltingboard.com/images/smilies/thumbup.png)
Curious about the bobbin winder tire - which one did you get?
Janey - Neat people never make the exciting discoveries I do.
#9
![Default](/images/icons/icon1.gif)
Whew, I was hoping that the 2460 worked on your machine. I would have been upset if I had led you wrong. It is good to know and have it posted which tire was the correct one and that it worked well.
Janey - Neat people never make the exciting discoveries I do.
Janey - Neat people never make the exciting discoveries I do.