Anyone know when this machine model got released ?
#1
Member
Thread Starter
Join Date: Jul 2017
Posts: 3
Anyone know when this machine model got released ?
Hi,
i found it next to a dumpster and decided to keep it cause it looks great. But i'm wondering when this model got released, i can't find it using google.
[ATTACH=CONFIG]576347[/ATTACH]
thx
someone on reddit referred me to you.
i found it next to a dumpster and decided to keep it cause it looks great. But i'm wondering when this model got released, i can't find it using google.
[ATTACH=CONFIG]576347[/ATTACH]
thx
someone on reddit referred me to you.
#2
Super Member
Join Date: Jun 2012
Location: Sonoma County, CA
Posts: 4,299
I have one that looks just like it but is labeled as a model 1563 instead of a 585 - I don't know that I was ever able to definitively date mine beyond "probably mid 50's". I'm also not sure what the difference between the two machines is - I'm looking at the photo of mine right now and I can't spot any differences!
[ATTACH=CONFIG]576349[/ATTACH]
I can tell you that mine sews very nicely, though. Get yours cleaned up and you should have a nice machine!
[ATTACH=CONFIG]576349[/ATTACH]
I can tell you that mine sews very nicely, though. Get yours cleaned up and you should have a nice machine!
#3
More than likely without documentation with the machine one can only guess that it is probably from the 1960s. It will probably clean up nicely.
It looks like this machine may be a left homing. Make sure you have it set for straight stitching as it looks to me that it may have the straight stitch plate installed. A manual for this machine can be found at http://www.singerco.com/uploads/down...hite-565-x.pdf
A lot of information can be found about this era of machines can be found on this thread -> Vintage Japanese 'Badged' Zig Zag and Straight Sew Sewing Machines
It looks like there may some youtube videos per https://www.google.com/search?q=+&nu...hine+model+565
Were there any bits and pieces found with it?
Have fun with your 'new' machine.
Janey - Neat people never make the exciting discoveries I do.
#4
Member
Thread Starter
Join Date: Jul 2017
Posts: 3
@sewnoma
the model is a 565, but yeah they look very similar.
@ourworkbench
Thank you
sorry, but what is left homing ? ( i'm not used to sewing, i picked it up for my girlfriend and also english is not my first language.
Thanks for all the links. and unfortunately there were nothing else with it, just the machine and the cabinet. The pedal that activate it is made to be used with the leg instead of the feet.
i'm glad to hear its probably from the 60s, i don't care if i don't have an exact date
Thanks, to both of you
the model is a 565, but yeah they look very similar.
@ourworkbench
Thank you
sorry, but what is left homing ? ( i'm not used to sewing, i picked it up for my girlfriend and also english is not my first language.
Thanks for all the links. and unfortunately there were nothing else with it, just the machine and the cabinet. The pedal that activate it is made to be used with the leg instead of the feet.
i'm glad to hear its probably from the 60s, i don't care if i don't have an exact date
Thanks, to both of you
#6
Super Member
Join Date: Mar 2016
Posts: 2,888
You can usually remove the pedal from the knee bracket if you prefer a foot pedal. On Singer sewing machines, it slides out. On one of my Japanese machines, you have to unscrew it.
Sorry, I don't understand left homing either. Janey and Cari do (and some others as well, I'm sure) and they will explain it.
It looks like it's been in the home of a smoker. Once it's cleaned, it will look tons better. I use gojo (the handsoap for car mechanics) for mine. Just wipe it on and wipe it off with a clean towel or rag. Use an old toothbrush and qtips to get in the corners. If your metal parts look not so great, use metal polish. (That's not the only way to clean it, just the way I do it.) It will need to be cleaned and oiled on the inside, too.
If some of your questions are not answered, ask them. Someone will almost always know or know where to find it.
bkay
This is an older machine, but the principals are the same.
How to clean an oil a vintage sewing machine
http://www.youtube.com/watch?v=bidpJ..._order&list=UL
Sorry, I don't understand left homing either. Janey and Cari do (and some others as well, I'm sure) and they will explain it.
It looks like it's been in the home of a smoker. Once it's cleaned, it will look tons better. I use gojo (the handsoap for car mechanics) for mine. Just wipe it on and wipe it off with a clean towel or rag. Use an old toothbrush and qtips to get in the corners. If your metal parts look not so great, use metal polish. (That's not the only way to clean it, just the way I do it.) It will need to be cleaned and oiled on the inside, too.
If some of your questions are not answered, ask them. Someone will almost always know or know where to find it.
bkay
This is an older machine, but the principals are the same.
How to clean an oil a vintage sewing machine
http://www.youtube.com/watch?v=bidpJ..._order&list=UL
#7
Member
Thread Starter
Join Date: Jul 2017
Posts: 3
It looks like it's been in the home of a smoker. Once it's cleaned, it will look tons better. I use gojo (the handsoap for car mechanics) for mine. Just wipe it on and wipe it off with a clean towel or rag. Use an old toothbrush and qtips to get in the corners. If your metal parts look not so great, use metal polish. (That's not the only way to clean it, just the way I do it.) It will need to be cleaned and oiled on the inside, too.
#8
Left homing is where the machine set for straight stitching the needle enters the left side of the zig-zag plate hole.
With cleaners, you do NOT want to have abrasives in them.
Janey - Neat people never make the exciting discoveries I do.
#9
Left homing means that you can not adjust the needle position when sewing a straight stitch, and it's always to the far left of the zig zag pattern.
The best way to know if its left homing is to look for a needle position knob/lever. Sometimes they aren't as easy to identify, as they may just say LCR, or show a picture of some sort. This one shows the pictures and is clearly marked "Needle Position". If it's got a straight stitch plate with the hole in the left position, then you must set the needle position to the left position (it's currently set at the right position) or you'll hit the needle plate. So far, I've never seen a needle plate with a single hole in the far right position, only left or center. I'd love to know if someone has a single hole - right homing plate. Might be a special purpose to line up correctly with a specialty foot . . .
Machines like this often came with a wide hole throat plate for zigzag, and a single hole plate for specific types of straight stitching. So if you don't have a wide hole plate, you'll want to get one for the machine. This also looks like it takes cams of some sort, maybe Sewnoma has them and can show you what they look like.
I refer machines of this era as "dashboard" because they have the look of 50-60's era car dashboards. I would have loved to put together a collection of neat looking dashboard machines, but I seriously ran out of room.
The best way to know if its left homing is to look for a needle position knob/lever. Sometimes they aren't as easy to identify, as they may just say LCR, or show a picture of some sort. This one shows the pictures and is clearly marked "Needle Position". If it's got a straight stitch plate with the hole in the left position, then you must set the needle position to the left position (it's currently set at the right position) or you'll hit the needle plate. So far, I've never seen a needle plate with a single hole in the far right position, only left or center. I'd love to know if someone has a single hole - right homing plate. Might be a special purpose to line up correctly with a specialty foot . . .
Machines like this often came with a wide hole throat plate for zigzag, and a single hole plate for specific types of straight stitching. So if you don't have a wide hole plate, you'll want to get one for the machine. This also looks like it takes cams of some sort, maybe Sewnoma has them and can show you what they look like.
I refer machines of this era as "dashboard" because they have the look of 50-60's era car dashboards. I would have loved to put together a collection of neat looking dashboard machines, but I seriously ran out of room.
Thread
Thread Starter
Forum
Replies
Last Post
dreamer2009
General Chit-Chat (non-quilting talk)
20
11-20-2010 08:58 AM
craftybear
Links and Resources
3
06-17-2010 07:21 PM