Brother Pacesetter FZ2 spool pins
05-02-2022, 06:27 AM
#1
Super Member
Thread Starter
Join Date: May 2020
Location: Sunset Coast of Michigan
Posts: 1,000
Brother Pacesetter FZ2 spool pins
Hello all, I just got this machine back from being serviced, after purchasing it from goodwill online. The needle bar was rusted and frozen but now works like a charm. However it is missing all of the original attachments and the two pop up spool pin holders. Does anyone know of a good source for the pop up spool pins (part number 3818), perhaps another compatible donor machine? There were other needle plates including straight stitch and darning, but I didn’t see part numbers anywhere. Thanks in advance.
05-07-2022, 03:46 PM
#2
Super Member
Join Date: Mar 2015
Location: Denver, CO
Posts: 4,305
A person that I know, who is familiar with vintage Brother machines (& has a couple Pacesetters) told me -
"The pop up spool pins on this machine are the same as the pop up pins on other makes so you should be able to find them on Ebay, etc..
As for the needle plates, these were exclusive to this machine and the only way to get them is from someone parting out an FZ2."
Janey - Neat people never make the exciting discoveries I do.
"The pop up spool pins on this machine are the same as the pop up pins on other makes so you should be able to find them on Ebay, etc..
As for the needle plates, these were exclusive to this machine and the only way to get them is from someone parting out an FZ2."
Janey - Neat people never make the exciting discoveries I do.
05-09-2022, 05:30 AM
#4
Super Member
Thread Starter
Join Date: May 2020
Location: Sunset Coast of Michigan
Posts: 1,000
Thanks Janey, that is very helpful. I was going to troll ebay to look for the needle plates, but alas, apparently that might be a proverbial needle in a haystack. I'm hoping to find the spool pins now. I really appreciate the reply ;-) Thanks!!
