Cleaning and repairing the Shellac clear coat on Vintage sewing machine heads
#81
Senior Member
Join Date: Mar 2010
Location: In the Hills of Arkansas
Posts: 398
I am so impressed. Having been raised in the manufacturing business of sewing machine cabinets I was also aware of the wholesale and retail part of sewing machines. HOWEVER, at no time was I involved in the process of restoring the beautiful old machine heads and did not have a clue as to what to do for the major overhaul. I did repair machines but no restoration so I do thank you for all this wonderful valuable information. You are a dear for passing it along to the rest of us. I do have a 1911 White in need. I had the gorgeous cabinet restored professionally about 30 years ago so now maybe I could work on the head. Thank you again. BarbM32
#82
KittyKat, I always test an area to see how will the decals will hold up or if they need a coat of shellac to protect them. Vintagemotif is right sometime all you can use on the decals is machine oil. I do this also when I know the decals will not hold up. But I always clean the black Japan.
#83
Super Member
Thread Starter
Join Date: Mar 2010
Location: Huntsville, AL
Posts: 2,609
Vintagemotif, you are so so right some of these old ladies just want to be old ladies with a little make up of sewing machine oil. They just want to loved and used as they were meant to be.
#84
My Mom and I were talking about possible names for this machine, and one of her suggestions was Bette, after Bette Davis. It seems her personality may favor that option.
#85
Super Member
Thread Starter
Join Date: Mar 2010
Location: Huntsville, AL
Posts: 2,609
Bette Davis is a great name for this machine, her decals are a little fiesty like Miss Davis. Sorry she has caused you some trouble but that is Bette for you
#86
Super Member
Thread Starter
Join Date: Mar 2010
Location: Huntsville, AL
Posts: 2,609
Vintagemotif and KittyKat bring up a good point. My technique is not a cure all and will not restore bad decals or make them look new again but will brighten them, they do need to be cleaned well with sewing machine oil(decals). Remember they have tarnished with age so keep this in mind when they don't seem as clean and bright as you think they should be.
After cleaning apply shellac over them to protect them. Some decals are so brittle and basically rotten from age there is nothing you can for them but to leave them as is. the basic head japan black can be cleaned up well and will shine again but don't expect to get all the crazying out, although it will smooth out a lot. Are goal is to make the machine clean and pretty without ruining the original patina of age. All my old age wrinkles can't be smoothed either. This is not a miracle cure but it will make it look much better and in keeping with antique restoration techniques without devalueing the machine. Skip
#88
Super Member
Thread Starter
Join Date: Mar 2010
Location: Huntsville, AL
Posts: 2,609
Skip
#90
Thanks Glenn for this excellent tutorial. I have a 301 that has lots of pin scratches and I think your plan will improve it's appearance.
Here is my 1904 15-91 treadle with it's delicate decals. Do you think I can touch them with machine oil? I love sewing on this machine.
Here is my 1904 15-91 treadle with it's delicate decals. Do you think I can touch them with machine oil? I love sewing on this machine.
Thread
Thread Starter
Forum
Replies
Last Post
Glenn
For Vintage & Antique Machine Enthusiasts
105
06-17-2023 07:05 AM
smokeythecat
For Vintage & Antique Machine Enthusiasts
3
03-22-2018 11:58 AM
Redsquirrel
For Vintage & Antique Machine Enthusiasts
3
10-12-2014 09:00 AM
Glenn
For Vintage & Antique Machine Enthusiasts
35
07-03-2014 08:44 PM