cashs_mom

My husband bought me a Featherweight on eBay (long story) but the foot controller was old and the plug came off so I can't even find out if the motor runs. I also have a 301. The foot controllers appear to be the same. Could I use the controller from the 301 on the Featherweight?

pennycandy

Just to make sure I understand you correctly if you mean only the controller itself, yes it will fit either one. Matter of fact you don't need to do any rewiring because both machines have the same 3 pin terminal on the machine to plug in the foot control. . Check here to see what I'm referring to http://shop.sew-classic.com/Cord-Set...ers-SCE123.htm

Foot controllers are pretty much generic and can be used on many machines. I have wired one from my 1948 Singer 15-91 onto a 1960's Japanese made White.

Cari-in-Oly

Yes. The same set up was used for many Singer models. The only way it wouldn't work is if your 301 uses two separate cords for power and controller. Some 301s do and some just use the same set up as the FW.

Cari

pennycandy

Sorry ignore my answer above, I can't edit it and it isn't completely correct. Here's my updated answer:

Just to make sure I understand you correctly if you mean only the controller itself, yes it will fit either one. Foot controllers are pretty much generic and can be used on many machines. I have wired one from my 1948 Singer 15-91 onto a 1960's Japanese made White.
Only problem I can see is if your 301's foot controller plugs into a 2 or 3 pin terminal. This is a 2 prong wire http://shop.sew-classic.com/Cord-Sin...rol-197628.htm. If both the Featherweight and 301 have a 3 pin terminal like this http://shop.sew-classic.com/Cord-Set...ers-SCE123.htm than don't need to do any rewiring. You can plug it directly into the Featherweight.

Edited to add
Cari answered while I was typing my update.

cashs_mom

Thanks, Penny and Cari. The one I have looks like this

[ATTACH=CONFIG]558501[/ATTACH]

Maybe I can find out if the machine works now.

cashs_mom

It won't let me edit the above, but it's the 3 prong type of connection on both machines so it should work.

Cari-in-Oly

Yep you should be fine. Actually, the 301s and other machines that have the separate plug for the controller, you can use the other set up where the plug and controller are both wired to the three prong. I have several Singers that use one or the other and when I want to use one I just grab the first cord/controller set that's handy.

Cari

cashs_mom

Thatnks so much Cari. There are a couple other problems my husband needs to address with the seller. I just wanted to make sure the motor was okay and it actually ran before he did that.

jbj137

***
*** Yes, the 221 & 301 are interchangeable.
***

cashs_mom

I used the 301 foot controller today and the Featherweight just hums right along. Makes that pretty straight stitch that these old machines do so well. My husband is going to take it out to Kimberly's in Katy this week to have them over it. After the mess the wiring on the controller was I don't really want to use it much until someone looks at it. I told my husband I was lucky I didn't get burned from bad wiring in the plug.