Found a Singer 201
03-31-2012, 08:28 AM
#21
Super Member
Join Date: Feb 2012
Posts: 8,091
Originally Posted by Caroline S
Thanks Joe. I go look Monday, OJCSG says the 201 is nicer than the 15-91. The best part (worst???) is that I opened my mouth when I was buying the 15-91 and mentioned to the OJCSG that I collected old sewing machines. Now he birddogging for me. He is the one who found the 201. That is all I need another enabler besides DD!!
I have other quiet machines, but not like this. I'm at a loss for words to describe it.
Joe
03-31-2012, 11:14 AM
#22
Super Member
Join Date: Jan 2012
Location: USA
Posts: 1,616
Caroline, you found a true treasure! I restored the top of my table. If you want to clean it up, here's what you do... This is only a 2 day process. Clean the wood top with murphy's oil soap. From your picture, it looks pretty grimy on the table in front of the machine.
After the grime is cleaned off, take the top off the table, remove all the hardware. Place the wood pieces on layers of newspaper. This next step is to restore your table, this will not refinish your table.(Restoring keeps the value, refinishing ruins the value) If you have any dark rings (from glasses, etc) use 00 or 000 or 0000 steel wool to buff the dark spots away. Don't use sand paper!
You'll need denatured alcohol and rags. The finish on your table is made from shellac, which is made with denatured alcohol. Pour the denatured alcohol on the rag and wipe with the grain, quickly from edge to edge. What you're doing is dissolving the shellac. As you spread it from side to side you're filling the scratches with the same shellac. Your goal is not to remove all the shellac, just move it around and let it dry again. After you see the scratches are gone, take a rag soaked with alcohol once again and go over the entire top to smooth it all out.
Once it's dry, use a paste wax for furniture. I used Briwax in the antique mahogany color. It's a fine furniture grade wax.
[ATTACH=CONFIG]324116[/ATTACH]
I didn't do the sides, only the top and it looks identical in color to the rest of the table. The wax gives it a matte finish that won't scratch when my quilt pins slide across it. I wish I had taken 'before' photos! I'm kicking myself for not doing this. It was in pretty bad shape. The shellac was flaking off on nearly half the top, and there were rings from water glasses. It was filthy with thick black gunk in front of the machine, just like yours shows. (What's the matter with these people??? Don't they know how to clean? Yuck! LOL)
After the grime is cleaned off, take the top off the table, remove all the hardware. Place the wood pieces on layers of newspaper. This next step is to restore your table, this will not refinish your table.(Restoring keeps the value, refinishing ruins the value) If you have any dark rings (from glasses, etc) use 00 or 000 or 0000 steel wool to buff the dark spots away. Don't use sand paper!
You'll need denatured alcohol and rags. The finish on your table is made from shellac, which is made with denatured alcohol. Pour the denatured alcohol on the rag and wipe with the grain, quickly from edge to edge. What you're doing is dissolving the shellac. As you spread it from side to side you're filling the scratches with the same shellac. Your goal is not to remove all the shellac, just move it around and let it dry again. After you see the scratches are gone, take a rag soaked with alcohol once again and go over the entire top to smooth it all out.
Once it's dry, use a paste wax for furniture. I used Briwax in the antique mahogany color. It's a fine furniture grade wax.
[ATTACH=CONFIG]324116[/ATTACH]
I didn't do the sides, only the top and it looks identical in color to the rest of the table. The wax gives it a matte finish that won't scratch when my quilt pins slide across it. I wish I had taken 'before' photos! I'm kicking myself for not doing this. It was in pretty bad shape. The shellac was flaking off on nearly half the top, and there were rings from water glasses. It was filthy with thick black gunk in front of the machine, just like yours shows. (What's the matter with these people??? Don't they know how to clean? Yuck! LOL)
Last edited by Christine-; 03-31-2012 at 11:22 AM.
03-31-2012, 03:43 PM
#25
Super Member
Thread Starter
Join Date: Jan 2011
Location: Sierra Vista, AZ
Posts: 3,992
Just like Joe, I printed your instructions for future reference. Unfortunately a lot of these machines have no value to some people. I think most have been shoved into a garage or storage area and for the most part forgotten unless they need a flat surface to pile something on.
04-02-2012, 05:13 AM
#27
Super Member
Join Date: Oct 2011
Location: Timmins, Ont. Canada
Posts: 4,683
I have a Singer Serial # JB291470 - I have checked ISMACS & can't seem to find any info. Can someone help me here - maybe Charlee or Joe? Could it be a 201 or 15-91??? Looks very similar to the one in Caroline's pictures but I know many models look similar. Would appreciate any help here.
04-02-2012, 05:29 AM
#28
Super Member
Thread Starter
Join Date: Jan 2011
Location: Sierra Vista, AZ
Posts: 3,992
Originally Posted by callen
I have a Singer Serial # JB291470 - I have checked ISMACS & can't seem to find any info. Can someone help me here - maybe Charlee or Joe? Could it be a 201 or 15-91??? Looks very similar to the one in Caroline's pictures but I know many models look similar. Would appreciate any help here.
04-02-2012, 05:31 AM
#29
Super Member
Join Date: Feb 2012
Posts: 8,091
Callen,
The charts that tell me the model number by serial number do not go to the dual letter numbers.
All I can find out from the charts I have is that JB is 1936 and made in Saint-Jean-sur-Richelieu, Québec, Canada.
If the machine has a potted motor like Carolines but has a tensioner on the front it's most likely a 201-2.
If you post a pic we can ID it.
Joe
The charts that tell me the model number by serial number do not go to the dual letter numbers.
All I can find out from the charts I have is that JB is 1936 and made in Saint-Jean-sur-Richelieu, Québec, Canada.
If the machine has a potted motor like Carolines but has a tensioner on the front it's most likely a 201-2.
If you post a pic we can ID it.
Joe
04-02-2012, 05:54 AM
#30
Super Member
Join Date: Oct 2011
Location: Timmins, Ont. Canada
Posts: 4,683
Originally Posted by callen
I have a Singer Serial # JB291470 - I have checked ISMACS & can't seem to find any info. Can someone help me here - maybe Charlee or Joe? Could it be a 201 or 15-91??? Looks very similar to the one in Caroline's pictures but I know many models look similar. Would appreciate any help here.
Thread
Thread Starter
Forum
Replies
Last Post
Carol34446
For Vintage & Antique Machine Enthusiasts
1
09-16-2013 10:53 AM
