Free Westinghouse, which part is clean and which it dirty??
#1
Free Westinghouse, which part is clean and which it dirty??
[ATTACH=CONFIG]320260[/ATTACH][ATTACH=CONFIG]320261[/ATTACH]
This is the Free Westinghouse that DH picked up for me while he was on a business trip in WI. We cleaned it up a little but but wasn't sure if the shiny part is how the machine is supposed to look or the dull part. I don't want to rub off the clear coat.
Also there is a part that is broken off and I have all the pieces, should I get a new one or is it safe to glue the piece back together???
This is the Free Westinghouse that DH picked up for me while he was on a business trip in WI. We cleaned it up a little but but wasn't sure if the shiny part is how the machine is supposed to look or the dull part. I don't want to rub off the clear coat.
Also there is a part that is broken off and I have all the pieces, should I get a new one or is it safe to glue the piece back together???
Last edited by pinkberrykay; 03-16-2012 at 11:05 AM. Reason: to add pictures
#2
Super Member
Join Date: Feb 2012
Posts: 8,091
I would say the shiny spot around the spool pin is the clean area and the grungy dull area is the dirty part.
Use no chemicals, no Simple Green, no 409, no dish washing detergent, nothing I repeat NOTHING with alcohol in it.
Many say to use sewing machine oil and cotton balls. I've used the oil with a rag and it did work on some machines, on others not at all.
I've also used Goop non pumice hand cleaner with stain remover. That also works on some machines. Most people say to use Go-Jo non pumice hand cleaner, I'm going to try that next time I get to the auto parts place.
I've yet to find anything that will work on every machine. All they are covered with is oil residue, body oils, tobacco smoke and nicotine, fire place smoke and soot, grunge, and generations of dirt. It shouldn't be that hard to clean them. It wouldn't be except for the decals and lacquer or clear coat that's on them.
What part is broken? I don't see it. All I see is you need a new bulb and screw and nut for the bulb cover. And where is the bobbin winder?
Joe
Use no chemicals, no Simple Green, no 409, no dish washing detergent, nothing I repeat NOTHING with alcohol in it.
Many say to use sewing machine oil and cotton balls. I've used the oil with a rag and it did work on some machines, on others not at all.
I've also used Goop non pumice hand cleaner with stain remover. That also works on some machines. Most people say to use Go-Jo non pumice hand cleaner, I'm going to try that next time I get to the auto parts place.
I've yet to find anything that will work on every machine. All they are covered with is oil residue, body oils, tobacco smoke and nicotine, fire place smoke and soot, grunge, and generations of dirt. It shouldn't be that hard to clean them. It wouldn't be except for the decals and lacquer or clear coat that's on them.
What part is broken? I don't see it. All I see is you need a new bulb and screw and nut for the bulb cover. And where is the bobbin winder?
Joe
Last edited by J Miller; 03-16-2012 at 02:08 PM.
#3
Its the bobbin winder that is missing. It mounts to the neck on the right, it looks like it snapped off right near the mounting screw. I was hoping to just be able to glue it back together and see what happens.
#6
Super Member
Join Date: Feb 2012
Posts: 8,091
What is the bobbin winder made out of? Most are metal. Usually cast iron or stamped steel or a combination of both.
That's why I said I don't know how well glue will hold. If it's a cast metal, you might be better of trying something like JB Weld rather than glue.
Just thinking.
Joe
That's why I said I don't know how well glue will hold. If it's a cast metal, you might be better of trying something like JB Weld rather than glue.
Just thinking.
Joe
Thread
Thread Starter
Forum
Replies
Last Post
craftybear
Links and Resources
10
06-10-2011 03:13 AM
craftybear
Links and Resources
2
02-19-2011 07:24 AM