Go Back  Quiltingboard Forums > Main > For Vintage & Antique Machine Enthusiasts
Handwheel replacements for spokes >

Handwheel replacements for spokes

Handwheel replacements for spokes

Old 03-24-2020, 08:12 AM
Super Member
Thread Starter
Join Date: May 2016
Location: near Topeka kansas
Posts: 3,350
Default Handwheel replacements for spokes

If one is wanting to convert a machine from electric to a handcrank and one does not have a spoked wheel,you need to get one. You also need to be aware that hubs on different handwheels may be deeper that others. 1" hubs work well for handcranks. When I tried to put a 1 5/8 deep hub from a Singer VS on a 99 , I could no longer get the clutch knob on. therefore, it wasn't usable for that purpose .I haven't measured to see if the number of spokes makes any difference.
Just a FYI
Attached Thumbnails vsm-deep-hub-handwheel-1-5ive-eithgts-singer-vs-marked-b.jpg   vsm-hub-one-inch-spoiked-hadwheel-b.jpg  
leonf is offline  

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off

FREE Quilting Newsletter

SEO by vBSEO ©2011, Crawlability, Inc.