missing a part
#2
No you are not missing a part. It is very difficult to slide the plate into place. The slide is very narrow. I usually will lift the machine up from my cabinet and watch so it catches into place firmly.
#3
There is a leaf spring that slips in to the grooves in the underside of the access plate. Held in place my a single screw.
Recommended procedure for getting it into place is taking off the feed dog plate ( offset screwdriver Is handy here) and sliding it in from the right.
Recommended procedure for getting it into place is taking off the feed dog plate ( offset screwdriver Is handy here) and sliding it in from the right.
#4
Janey - Neat people never make the exciting discoveries I do.
Not affiliated with offsite links.
#5
Member
Join Date: Dec 2019
Posts: 2
I have a Insprira/husgvarnia mega quilter and I am missing the parts that go on the four rollers to attach them to the frame. Would anyone know where these can be purchased. It appears no one is selling Inspira anymore.
Last edited by QuiltnNan; 12-11-2019 at 11:57 AM. Reason: shouting/all caps
#6
Deer lake. I see this is your first post. welcome aboard. May I suggest you start your own thread with a title like "Inspira/Husqvarns part needed." and your machine is a bit new for most of us here.
#7
Senior Member
Join Date: Jan 2016
Location: Herefordshire, UK
Posts: 397
There is a leaf spring that slips in to the grooves in the underside of the access plate. Held in place my a single screw.
Recommended procedure for getting it into place is taking off the feed dog plate ( offset screwdriver Is handy here) and sliding it in from the right.
Recommended procedure for getting it into place is taking off the feed dog plate ( offset screwdriver Is handy here) and sliding it in from the right.
Thread
Thread Starter
Forum
Replies
Last Post
craftybear
Links and Resources
5
09-25-2011 04:02 PM
craftybear
Links and Resources
10
06-10-2011 03:13 AM
craftybear
Links and Resources
2
02-19-2011 07:24 AM
stitchofclass2
General Chit-Chat (non-quilting talk)
13
11-18-2010 01:28 PM