motor for a pink atlas
#2
Super Member
Join Date: Jan 2010
Location: Outer Space
Posts: 9,319
You can find a replacement motor easy enough but finding a pink one to match is going to be the tricky part. Can live with a black one or from a donor machine? You may want to check ebay for parts as sometimes I've lucked out and found exactly what I needed. Belts and misc. can be bought from many internet sellers, Sew Classic being one.
#4
Super Member
Join Date: Feb 2012
Posts: 8,091
Black replacement motor + sandpaper + painters tape +pink spray paint + time and effort = a pink motor.
I'd try to fix the original (if there) first.
I have also run across sources for white colored motors and even non painted motors. But alas those links are in my dead hard drive.
Joe
I'd try to fix the original (if there) first.
I have also run across sources for white colored motors and even non painted motors. But alas those links are in my dead hard drive.
Joe
#5
Member
Thread Starter
Join Date: Oct 2011
Posts: 14
I do have the motor for it but its not running up to snuff. It isn't pulling enough to turn the domahickey that turns the. . . I thingamajig that lifts the needle up and down. Also the belt is slipping, but I put that off to being an old wor e out belt
#6
Super Member
Join Date: Feb 2012
Posts: 8,091
I'd start with a good cleaning and oiling of the machine. All the way from the top to the bottom and from domahickey to the thingamagjig. Then clean the motor out. My local guy told me he uses lighter fluid to clean the motors out.
(DISCLAIMER: This is a suggestion made by my local sewing machine repairman to help sluggish motors. Do this outside and be advised lighter fluid may ignite when you turn the motor on. It will burn off quickly with no damage to the motor. Do this at your own risk.)
He said, take the belt off and run the motor at full speed till it loosens up. If that doesn't help shoot some lighter fluid in it and then run it. He did not specify but I'm pretty sure he was talking about doing this on the brushes and commutator.
:-> Joe
(DISCLAIMER: This is a suggestion made by my local sewing machine repairman to help sluggish motors. Do this outside and be advised lighter fluid may ignite when you turn the motor on. It will burn off quickly with no damage to the motor. Do this at your own risk.)
He said, take the belt off and run the motor at full speed till it loosens up. If that doesn't help shoot some lighter fluid in it and then run it. He did not specify but I'm pretty sure he was talking about doing this on the brushes and commutator.
:-> Joe
#8
Member
Thread Starter
Join Date: Oct 2011
Posts: 14
i was just thinking if i could find another motor it couldnt hurt to have a spare lying around, lol. I am realtively new to this stuff, but i am loving that i can take an older machine apart and clean it and make it work better (i am not mechanically inclined at all!!!)
I got the machine for $8 and its pretty rough but its a challenge. It was frozen up completely and i have gotten as far as getting all the parts to move smoothly by the handwheel but the darn belt keeps slipping when the motor is running. Ughhh. I just had to walk away. On to my other project which is a sewmor and i think the feed dogs are not moving back and forth correctly only up and down. Anyway... thats a different story for a different day. Thanks everyone for your suggestions and help!
I got the machine for $8 and its pretty rough but its a challenge. It was frozen up completely and i have gotten as far as getting all the parts to move smoothly by the handwheel but the darn belt keeps slipping when the motor is running. Ughhh. I just had to walk away. On to my other project which is a sewmor and i think the feed dogs are not moving back and forth correctly only up and down. Anyway... thats a different story for a different day. Thanks everyone for your suggestions and help!
#9
Super Member
Join Date: Sep 2009
Location: Massachusetts, USA
Posts: 1,775
You can tighten the belt up a bit to keep it from slipping. Just loosen the screw that holds the motor on and adjust the placement of the motor a tiny bit to put a little bit more tension on the belt, then tighten the screw again. You might have to try it a few times before you find the perfect place for your belt.
Thread
Thread Starter
Forum
Replies
Last Post
Botanicat
For Vintage & Antique Machine Enthusiasts
3
05-08-2017 05:03 PM
Caroline S
For Vintage & Antique Machine Enthusiasts
7
04-02-2013 06:33 AM