Oiling Your Vintage/Retro Sewing Machine
#31
Power Poster
Join Date: Mar 2011
Location: Somewhere
Posts: 15,506
I understood what you were saying on the first post.
Doesn't WD stand for war department? (not that you even mentioned the stuff)
If I get an old machine, I should say when I bring an old machine home and it is still in the garage I will spray it down with the smelly blaster and let it sit. They are going to be cleaned when they come in the house and I can't spray that stuff inside.
Doesn't WD stand for war department? (not that you even mentioned the stuff)
If I get an old machine, I should say when I bring an old machine home and it is still in the garage I will spray it down with the smelly blaster and let it sit. They are going to be cleaned when they come in the house and I can't spray that stuff inside.
[ATTACH=CONFIG]448594[/ATTACH]
#34
My Mother took her 1970s Kenmore to a large Sewing Machine dealer (local to Portland, they advertise a lot on the radio) for a servicing. This was before I go into vintage machines and started doing my own. They must have used the OPs spray method, because two years later it stopped, frozen solid. I took her my older Kenmore (My Dad was a Sears Man, and bought both of them) and I brought hers home. When I opened it up, I could still see the spray pattern, and the sticky, whitish residue. I had to use PB Blaster to get it freed up, then clean it and oiled it with Tri-Flow. I will never let her take it to someone else again. And I tell everyone I can not to patronize these guys!
#36
That's true, but there's no reason to mislead them into thinking that spraying them with WD-40 while they're running is going to work out well for them!
#37
Power Poster
Join Date: Mar 2011
Location: Somewhere
Posts: 15,506
We have SO much info on here about cleaning and oiling it is really hard to miss. Taking a machine somewhere for service is always an option if there is someone you can trust near by. This guy just proves that you need to check and see if he is any good before you go there. I can think of places I've taken machines where I would NEVER go back and they have been in business for years.
#39
Banned
Join Date: Oct 2012
Location: San Lorenzo, CA
Posts: 5,361
#40
Banned
Join Date: Oct 2012
Location: San Lorenzo, CA
Posts: 5,361
Surely, I don't jest. ... This is a quick and easy way to do it. Am I saying it is the correct way? Nope, .... I did not say this was proper, that this was legitimate nor did I say it was recommended by a manufacturer. ........ would I ever use this method? Absolutely not. I clean them and use military spec bearing lube. .....In reality, the machine should be properly lubed by someone who knows sewing machines and can take the time to do it right. BUT, if that isn't an option, you can spray lube the entire mechanism, and the machine will keep functioning. No more, no less.
Please do not post more messages suggesting methods that YOU would not use. Really. This is stupid.
Thread
Thread Starter
Forum
Replies
Last Post
singerguy
For Vintage & Antique Machine Enthusiasts
20
09-22-2014 09:12 AM
miriam
Links and Resources
13
11-10-2011 06:45 PM