That Defiance is a very pretty machine. It's a later model than mine, and made after the name change to National. I was specifically after a machine made before the name change.
And the good news - my tucker fits! The bed hole in this machine is in a slightly different location than the National made machine, and it's also a different thread. But see - it fits! http://i31.photobucket.com/albums/c3...ps058e2904.jpg When I put this on the newer machine, the needle came down smack on top of the tucker bar. This one comes down just in front of the tucker - and it's the needle clamp that does the "pressing". http://i31.photobucket.com/albums/c3...psb856cd4b.jpg I was wondering about that extra leverl looking bar in the front, but it fits to hold the front guide firmly against the machine. |
msgd the seller on the Defiant to see if they had frt slide cover with serial # or or other access. Havent heard back yet.
|
The serial number should be stamped on the front - right were the front slide plate goes. The serial number is not on the slide plate with National made machines, like it is for some others.
|
Thanks...again! ( I think)
|
BTW- you do realize that Defiance is the same machine as your E-BT - just treadle and much prettier? you can tell it's 3/4 size by the way the underbraider plate fits (it would not stick over on a full size machine).
I really should not be interested - as I also have a E-BT, - but this one is oh so pretty ! So if you don't want it - let me know! I'll cry if no one bids on it |
oh my! A 3/4 size New Home just showed up on ebay - and I REALLY want that one! I hate when there are several I want going at the same time!
I know why my husband wanted me to buy that $5,000 Viking quilter - that would have taken ALL my machine money and then I'd be done, but I'd rather buy 50 - $100 machines instead! |
and I bet he would enjoy working on the 50 more than the 1....
|
i think im going for it. I'll have to xplain to DOH later...
|
Good luck!
I'll feel better passing on it if it goes to someone on the board - then I can be like an "aunt" instead of "mom" and that is almost as good. I'm going to jump on the other one - it's a bit more $$ but it's only in Iowa so should make it here safely. |
question ismac needle chart says National Defiance is 15*1 needle? Standard Defiance is 20*1, this is National, correct. Lastly, What did I just do?? buy a SM no means of propulsion....it's getting worse
|
All times are GMT -8. The time now is 02:47 PM. |