|
Kenmore 158.353 handcrank.err Not
2 Attachment(s)
Last night I was messing with my Kenmore. Terrible wiring so I just pulled off the motor and turned it by hand. Hey, that boss looks familiar. I grabbed a handcrank and it would hold on, just a bit wobbly. OK but would it work? No. The boss was farther back than on a Singer. The crank did not line up to the center of the clutch release knob and only worked well for about 80 degrees. Oh well, maybe someone else won't try this endeavor now. And now the machine is ready once I get power to it.[ATTACH=CONFIG]585901[/ATTACH][ATTACH=CONFIG]585902[/ATTACH]
|
Gotta love that color.
Marcia |
Originally Posted by leonf
(Post 7968329)
Last night I was messing with my Kenmore. Terrible wiring so I just pulled off the motor and turned it by hand. Hey, that boss looks familiar. I grabbed a handcrank and it would hold on, just a bit wobbly. OK but would it work? No. The boss was farther back than on a Singer. The crank did not line up to the center of the clutch release knob and only worked well for about 80 degrees. Oh well, maybe someone else won't try this endeavor now. And now the machine is ready once I get power to it.
I have only seen the pictures of these -- sure wish I could figure out how to make one. I've got a few machines that could use something like that. There is another one made for drop-head machines but I can't find the link to that one. Janey - Neat people never make the exciting discoveries I do. |
Thanks for the link. It looks a lot like the kind of crank sometimes seen on old mills for coffee, etc. except those are usually geared. Perhaps a modification to accept a belt..... makes me wonder about trying something with a bicycle crank/sprocket
Rob |
Originally Posted by OurWorkbench
(Post 7968606)
... There is another one made for drop-head machines but I can't find the link to that one.
That would be good for those treadles that are missing the parts to treadle. Janey - Neat people never make the exciting discoveries I do. |
Sew-classic sells a loosy-goosey but serviceable aftermarket handcrank set for next to nothing. I put it on a 66 a couple of years ago, and it has worked (and rattled) perfectly ever since. You do need a spoked wheel (or some clever workaround?) to use it. (Sew-classic sells those too, I think.) No, I don't work for Sew-classic, but it is my favorite place to get these odds and ends.
|
Janey, thanks for the links. I've considered making something like that for several machines.
Brass Head. Yes, I have the Chinese cranks ( pictured above) and vintage ones. Chinese are serviceable but not exciting |
HEY, LeonF, did you get the machine running? I might be having one just like yours headed my way. Any innards plastic or nylon? (Or haven’t you had her undressed yet?) What do you think of this as a treadle?
|
Another question, Leon - My “offer” of machine does not mention cams or anything; is that a spot for cams on top of yours? Please do tell me more about your —- 353! A Big thank you!
|
yobrosew`I didn't want to mess with electrical stuff that day, so I got it io stich hand turning the balance wheel and then put it back on the shelf. It does have an opening for a cam. I don't have one to try out. The base does not have holes for a treadle belt. I suppose one could shape some, but I'd rather start with one alreadt dome . Like a Necchi Supernova perhaps. They have plastic plugs in treadle holes.
I don't remember if it has plastic gears or not And it isn't close tonight. |
| All times are GMT -8. The time now is 09:49 PM. |