![]() |
Hi Janey,
Thanks for the reply, and in, fact thanks everyone who replied! The pic you posted looks exactly like my New Home. I had it running very well but only had the needle that was in it. It was bent and rusty so after I cleaned & polished it, the machine ran great for a short while till the needle broke. I checked a few sewing shops and was told at one that the needles (Round at the top of the shank) went out of production more than 30 years ago. Does anyone have an idea where these needles might be sourced??? Just went to use my Lelia 514 and it wont start/run/light. I checked that the cord is ok so I'm thinking the transformer/switch assembly might be bad. Any ideas on this problem or where to get the assembly? The only pics I have are too large to upload, not sure how to overcome that. Thanks Everyone, Marty ps I seem to have posted before I finished the reply. M |
Originally Posted by Marty R
(Post 8307466)
... I checked a few sewing shops and was told at one that the needles (Round at the top of the shank) went out of production more than 30 years ago. Does anyone have an idea where these needles might be sourced??? ...
I have a German machine that takes round shank needles. I fortunately had one. I took it to an industrial sewing place here in Denver. They found that a DBx1 would work. There may be some other systems of needles that might work like 287WH. Or maybe something else. Sometimes when you open pictures on your computer, can you "edit" picture and then an option would be to resize. Janey - Neat people never make the exciting discoveries I do. |
Originally Posted by Marty R
(Post 8307466)
Hi Janey,
The only pics I have are too large to upload, not sure how to overcome that. I generally rename the one I resize and call it the same thing as before but add an "a" to the end. I keep my original photo at the original size and save this one, as well, in case I need another one for the web. That way, I can keep up with what I've done. bkay |
Mystery German "New Home"
1 Attachment(s)
Janey & bkay,
I think I've got one that works. Marty |
1 Attachment(s)
I forgot to add that this New Home looks like a clone of the "Anker RZ" machine.
Marty[ATTACH=CONFIG]617966[/ATTACH] |
Originally Posted by Marty R
(Post 8307590)
I forgot to add that this New Home looks like a clone of the "Anker RZ" machine.
I'm thinking it may take a DBx1 needle aka 16x87 needle. https://www.sewingpartsonline.com/ne...x257-10pk.aspx has them available in sizes from 10 to18. I've never dealt with them, but it will give you some idea as to what needle you need for your machine. I have read that some of the different manufacturers have a different size shank for DBx1. I'm unsure which would be closest to the 16x87 or 287 system needles. That appears to be the same as I got for my German machine. I did try it by hand and made sure it works correctly Of course, I tried it by hand - as the machine doesn't have a motor or hand crank nor is it in a treadle, LOL. Janey - Neat people never make the exciting discoveries I do. |
Thanks Janey,
I'll get some to try. Do you how you are supposd to orient the needle eye since it has no flat? Or does it depend on the bobbin orientation? Marty |
Originally Posted by Marty R
(Post 8307807)
Thanks Janey,
I'll get some to try. Do you how you are supposd to orient the needle eye since it has no flat? Or does it depend on the bobbin orientation? Marty Janey - Neat people never make the exciting discoveries I do. |
All times are GMT -8. The time now is 06:42 AM. |