More attachments and stuff
 

First off, some Household stuff I picked up.

http://i31.photobucket.com/albums/c3...ps192988a9.jpg

http://i31.photobucket.com/albums/c3...psd43f3d34.jpg

I have the same set of attachments for the White - unfortunately the Household set is missing the attachment foot - the one the rest fit into. So I'll be watching for another set. I usually end up buying 2-3 sets of these older ones before I manage to get all the pieces, so getting the first one with everything but one is pretty good. The White set is missing the binder, but I have the rest.

http://i31.photobucket.com/albums/c3...psd5f5634a.jpg

love the artwork on the Household Box... too cool!

Then I found a large lot of stuff that had a few ones I really wanted. Now I have even more stuff to rehome!

One of the Prizes - a W&G metal box

http://i31.photobucket.com/albums/c3...pscdb920b1.jpg

And inside - everything but the ruffler. Even a few I'm not sure what they are . . . this is my third set of W&G feet - but the only set like this one.

Then some less interesting stuff - this would fit a Singer VS type machine. Though everything but the shirr plate and underbraider will fit round bobbin Singers. I think this is the third one I have like this . . . so add it to the outgoing pile

http://i31.photobucket.com/albums/c3...psc7b08508.jpg

This is a "New Home" box, lining is missing. Looks to be a White bobbin case, will figure out later what the feet fit - and it's got a W&G tucker and ruffler, but everything in this box is on the rusty side.

http://i31.photobucket.com/albums/c3...ps7967ed5f.jpg

Two cardboard boxes. The Tucker box is marked "New Home" but the needles in the other box are for a National and has the National type slide plates. I don't really need these - but don't have a box like this so I may hang on to them.

Then two more cardboard box Greist sets - and another one that I was after. I have not seen a "black side" Greist set before. These both fit New Home/Free Westinghouse machines.

http://i31.photobucket.com/albums/c3...ps5a99ec5e.jpg

And the last box - another partial set, not sure what it's for yet. I have several like this one too.

http://i31.photobucket.com/albums/c3...ps452e8526.jpg

Very nice! I love the Household box. My wife grew up in RI.
Rodney

And then all the "extra" stuff that I honestly would have been just fine if it wasn't included. Hopefully someone here can use some of it.

Buttonholers - I have one of each of these already - except for the gray box marked HS on the end. Yes - that stands for High Shank (straight). It is made to work with a zig zag machine, set to straight stitch with the needle in the LEFT position. The Singers are all short shank, and the red is "New Home" which is the same as Free Westinghouse (remember, this is NOT the older New Home).

http://i31.photobucket.com/albums/c3...psf4dd589b.jpg

And some other stuff - needles and screw drivers, this I'll keep too - some day I may have collected enough screwdrivers to have one for each set of attachments I have - well, probably not . . .

http://i31.photobucket.com/albums/c3...psc5e1c400.jpg

and manuals - and none of these are for machines I have or hope to have.

http://i31.photobucket.com/albums/c3...psd6be61ba.jpg

New Home

http://i31.photobucket.com/albums/c3...ps93997304.jpg

http://i31.photobucket.com/albums/c3...ps3f550a9a.jpg

This has no identifying info - looks to be a rather generic manual for a 15 clone.

http://i31.photobucket.com/albums/c3...ps35d04f81.jpg

http://i31.photobucket.com/albums/c3...pse2ec680a.jpg

The little red one is Riccar. it does not have any really good pictures of the machine in it.

http://i31.photobucket.com/albums/c3...ps026e5b30.jpg

http://i31.photobucket.com/albums/c3...psa3b6fa5e.jpg

http://i31.photobucket.com/albums/c3...ps7137157f.jpg

And the Coronado Automatic 45-4109. This is a zig zag machine, but does not take cams.

http://i31.photobucket.com/albums/c3...ps4b227e0a.jpg

http://i31.photobucket.com/albums/c3...psac63e9f0.jpg

And the green one Automatic Super Zig Zag

A high shank machine

http://i31.photobucket.com/albums/c3...ps2e994138.jpg

Interesting stitch length regulator

http://i31.photobucket.com/albums/c3...ps4ae8af8d.jpg

and it does take cams

http://i31.photobucket.com/albums/c3...psf287b584.jpg

And guess what also cam in this group.

http://i31.photobucket.com/albums/c3...psac4ef6b8.jpg

The box of cams and attachments

http://i31.photobucket.com/albums/c3...ps3887485c.jpg

I figure the HS buttonholer probably went with this group, and I'd love to see in reunited with a machine that can use them.

And last - another box of Deluxe ZigZag cams. These are similar in size to the first group, but quite different.

http://i31.photobucket.com/albums/c3...psf81ef20e.jpg

They have a raised bottom - the others are flat
http://i31.photobucket.com/albums/c3...psc5c1c8ea.jpg

And have four pin holes around the center hole, the other ones have one pin hole.

http://i31.photobucket.com/albums/c3...psf0309f9c.jpg

This is the smallest and largest of the cams

http://i31.photobucket.com/albums/c3...ps0883656a.jpg

if you see something you are interested in, give me a PM. I'm NOT selling them LOL!

Didn't catch I was missing the inside of the W&G box - so here it is

I realy like the tiny left and right cording feet. I know the edge sticher, but I"m not sure about some of the other ones to the left and right. The left attaches like the edge stitcher and binder (in lid of box) and the right attaches like the cording feet.
http://i31.photobucket.com/albums/c3...psd11c8677.jpg

trying to remember what my W&G set looks like inside.... Been months since I opened it. I'll look tonight.

If I had that Coronado manual I would make sure it gets scanned and added to the internet somewhere. Those badged machines never seem to have manuals.

If you have any of the screw drivers that fit into the Singer puzzle box I would be interested in buying them if the price is right! LOL
Also I am looking for a manual and an attachment box with feet for my Morse Lightweight. I figure someone will have to have them and I might as well ask, right?