Need help
 

I got a kenmore sewing machine 117.720 and I'm in need of a manual for it

google or do a search for one. I did and there were a few links.

Welcome to the board! My search engine for that machine shows me pictures of one that looks the same as the 117.552 and 117.810j I had. Here's a link

https://www.manualslib.com/k/kenmore+117.720.html

Try the 117.552. The tricky part on these machines is threading through the tension control, other than that there's not much to them. You could look at the manual for the 117. 959, it has the same tension control and the picture might be better, I didn't check.

There are vintage Kenmore groups out there, maybe on facebook and other places, I'm not sure. Someone there might have a better manual scan.

Welcome the the QB from SE Michigan! Congratulations on finding your machine. There are a number of sites, when checking with Google that provide manuals. I look forward to seeing you here often.

There is a vintage Kenmore group on groups.io. You have to join, but there is no charge. They have many manuals in their files and are a good source if you need some coaching.

bkay

​​​​​​thank you it took me awhile but I finally found the manual

As you may know, this machine was made by White. There are some things that have come up regarding some differences and threading that are characteristic of these machines. Here is a picture of my White threading. There is a click when it catches the spring.https://www.quiltingboard.com/attach...notchaedit.jpg

For loading the bobbin, this thread is helpful https://www.quiltingboard.com/vintag...c-t172420.html

These machines are direct drive, which means that the balance wheel turns clockwise when you are looking directly at the balance wheel.

Another thing to be aware of is that many have a flat spot on the drive pulley from sitting against the hand wheel. Some have sanded them smooth, some have used a lathe to make one from a rubber plug, and some have found replacements online. To prevent it from developing a flat spot, it is advised to move the motor away from the machine and stick something noticeable between them so the rubber is not against the hand wheel.

Janey - Neat people never make the exciting discoveries I do.

I have read about people "recovering" the drive will with a piece of rubber tubing, as from an auto parts store or hardware store, to address the flat spot.

Yes, Joe is correct. Another Joe did that at https://www.quiltingboard.com/5308499-post4.html John got some rubber tubing at an auto parts store that he tells about at https://www.quiltingboard.com/7535342-post15.html

Janey - Neat people never make the exciting discoveries I do.

There is also a knemore group on face book that has manuals.