|
Originally Posted by JoeJr
(Post 8543748)
Basically that's what I mean. I don't sew much, but I do like to work on machines, and at any given time have a number of them cleaned up and just sitting there (currently 18 with 5 more needing servicing). A while back I started a thread about "parking" a machine
https://www.quiltingboard.com/vbulle...e-t312178.html which might help explain my comment. |
Originally Posted by OurWorkbench
(Post 8543754)
It is generally recommended on these old black machines that it should be wiped down with sewing machine oil. There are a couple of threads about it at https://www.quiltingboard.com/vintag...v-t167789.html and https://www.quiltingboard.com/vintag...s-t193635.html
That is a great cabinet. If it is decent shape, I would recommend "reviving it" by following the instructions at https://www.quiltingboard.com/tutori...s-t109859.html Right. I'm not sure what you mean? If the plug fits, it does not matter which foot controller (aka pedal) is used. Yes, loosen it when not in use. You just have to remember to tighten it when you go to sew. It doesn't feed fabric very well when loose. Janey - Neat people never make the exciting discoveries I do. The cabinet is in great shape, even has the original spool rack and an oil can holder. I wanted to sand her down a bit and give her a deeper stain but I wasn't sure if that would be 'disrespectful' to the vintage quality. But I would prefer a much deeper finish so not sure what your thoughts are on that. The pedal does fit, just mentioning it's not the button foot which works out cause this one looks a bit cooler. But definitely loosened the screw up while I rewired the machine and just waiting on a new 3 pin terminal to connect all my new wires to. Now I was debating on trying to ground the machine.... I'm still on the fence and not sure if anyones done that before, but it seems like a good idea. |
Originally Posted by OurWorkbench
(Post 8543754)
It is generally recommended on these old black machines that it should be wiped down with sewing machine oil. There are a couple of threads about it at https://www.quiltingboard.com/vintag...v-t167789.html and https://www.quiltingboard.com/vintag...s-t193635.html
That is a great cabinet. If it is decent shape, I would recommend "reviving it" by following the instructions at https://www.quiltingboard.com/tutori...s-t109859.html Right. I'm not sure what you mean? If the plug fits, it does not matter which foot controller (aka pedal) is used. Yes, loosen it when not in use. You just have to remember to tighten it when you go to sew. It doesn't feed fabric very well when loose. Janey - Neat people never make the exciting discoveries I do. |
I would still suggest https://www.quiltingboard.com/tutori...s-t109859.html as it really is amazing the difference is made in the looks by just cleaning the wood using Glenn's method.
Janey - Neat people never make the exciting discoveries I do. |
Originally Posted by JoeJr
(Post 8543631)
You should use only sewing machine oil, including for cleaning the surface of the machine. There are different brands, and I don't think they're all the same, I have no brand recommendation, I just make sure it says sewing machine oil and that it's clear. You can use petroleum jelly (I think the original formula for Vaseline) to re-grease the motor (there are grease cups on the underside). I look here for parts first:
https://www.vintagesingerparts.com/ I have no affiliation with the company. And you can find the user and adjuster's manual for your machine there. But the machine is filthy so time to clean. I know you mentioned petroleum jelly to use as grease, I read somewhere that petroleum wasn't good to use as grease so I'm just curious what you experience with that is. Or if there is something else I should buy. And how often should I grease? I think I read like once a year or something. |
Use petroleum jelly in the grease cups of the potted motor, only. I use tri-flow grease for the other areas that need grease, like the gears. Others may use different grease for the gears. I think everyone agrees on petroleum jelly for the grease cups, only.
bkay |
Originally Posted by bkay
(Post 8544595)
Use petroleum jelly in the grease cups of the potted motor, only. I use tri-flow grease for the other areas that need grease, like the gears. Others may use different grease for the gears. I think everyone agrees on petroleum jelly for the grease cups, only.
bkay You guys are the best!!! |
My Tri-Flow grease seems to be thinner than petroleum jelly. I would be tempted to use petroleum jelly on the gears, too. After all, Singer did not have a different product for the grease cups and the gears. I know you should not use Tri-Flow for the grease cups. Just my 2¢
Janey - Neat people never make the exciting discoveries I do. |
Ok, I did a little further research. More is needed. There were two products "Singer Lubricant" and "Singer Motor Lubricant"
There seems to be a lot of conflicting information out there. https://www.quiltingboard.com/vintag...a-t247204.html Which has this page from a Singer Manual with the last copyright 1941 https://www.quiltingboard.com/attach...2-photo-10.png Janey - Neat people never make the exciting discoveries I do. |
Originally Posted by bkay
(Post 8544595)
Use petroleum jelly in the grease cups of the potted motor, only. I use tri-flow grease for the other areas that need grease, like the gears. Others may use different grease for the gears. I think everyone agrees on petroleum jelly for the grease cups, only.
bkay Next question is about WICKS. Are there supposed to be wicks in the grease cups. I’ve never seen anyone take them out of the grease cups in videos so I assumed there were none there. But that could just be because my machine didn’t come with wicks in the grease cups. I did notice a wick in the needle bar. So I want to replace that. Just to be OCD. |
| All times are GMT -8. The time now is 07:08 PM. |