Thank you so much for bringing so much expertise to us. Learning the processes from the video will take multiple viewings but they will be well worth the time. My daughter just brought a 301 to me for cleaning and oiling. Guess I will do some deeper inspection if that doesn't make the machine work well for her. Again, THANK YOU!
|
One word of caution - do not do the timing unless you have to or can be sure you can get it right - if you mess up, I've seen $85 for a shop to do it - it should be your last resort
|
With 7 machines now, I have to check the manual every time I switch to a different machine, just to be sure.
|
Thanks so much...great info for those of us just starting to use a vintage machine.
|
I added this to the VSMS Virtual Forum so everyone there can read it. Good information and I know it will help quite a few of us!
Billy |
Great checklist of possibilities - thanks!
|
Thanks for the good advice. And that video was eye-opening!
|
Originally Posted by Lostn51
I added this to the VSMS Virtual Forum so everyone there can read it. Good information and I know it will help quite a few of us!
Billy |
Do you know where to get an owners manual?? I only paid $5.00 for this little machine. This is great info and I will follow it.Thank you
|
Originally Posted by miriam
Originally Posted by Lostn51
I added this to the VSMS Virtual Forum so everyone there can read it. Good information and I know it will help quite a few of us!
Billy Let's see if this is the tutorial... http://www.quiltingboard.com/t-147275-1.htm |
All times are GMT -8. The time now is 01:24 AM. |