Replaced Stitch Indicator
#1
Junior Member
Thread Starter
Join Date: Jan 2020
Location: Ontario
Posts: 299
Replaced Stitch Indicator
So i had to replace the stitch indicator plate and stitch lever on the FW i recently purchased. Must of took quite a knock to bend the lever and luckily, hasn't caused damage to the internal mech. Also, by the looks of the wear/distortion on the stitch indicator plate, a previous owner i suspect was quite rough when selecting stitch length.
Anyways, all fitted now and looking pretty. Now, just to source a case for it
Anyways, all fitted now and looking pretty. Now, just to source a case for it
Last edited by Hooligan; 06-04-2021 at 05:19 PM.
#3
Junior Member
Thread Starter
Join Date: Jan 2020
Location: Ontario
Posts: 299
#5
Junior Member
Thread Starter
Join Date: Jan 2020
Location: Ontario
Posts: 299
Yup, count myself lucky indeed as had already invested in parts before noticing the bent lever. Now just left to source a case and a table for it