What do these attachments fit?
#1
Super Member
Thread Starter
Join Date: Feb 2012
Posts: 8,091
What do these attachments fit?
Got these for the side plate. If I can't figure out what it fits I'll cut it down to fit my Minnesota.
Here is what I know:
1: Edge Stitcher
2: Under Braider
3: Ruffler, one position
4: Ruffler, four position
5: Tucker
6: Adjustable Hemmer (missing it's screw and pointer, I got 2 like that now.)
7: 7 got lost somewhere
8: Front Slide Plate
9: Unidentified widget marked "SNAPIT"
The Edge Stitcher and Under Braider fit the slide plate so I'm sure they go together. The other parts probably came from the same machine. The patent dates on the slide plate are: OCT. 10-1911 & June 14-1910. The patent date on the Tucker is Nov. 25-1913.
I'm guessing that maybe this slide plate and the goodies would fit on a Singer 27 or 28?
Can anybody confirm or deny that?
Thanks,
Joe
Here is what I know:
1: Edge Stitcher
2: Under Braider
3: Ruffler, one position
4: Ruffler, four position
5: Tucker
6: Adjustable Hemmer (missing it's screw and pointer, I got 2 like that now.)
7: 7 got lost somewhere
8: Front Slide Plate
9: Unidentified widget marked "SNAPIT"
The Edge Stitcher and Under Braider fit the slide plate so I'm sure they go together. The other parts probably came from the same machine. The patent dates on the slide plate are: OCT. 10-1911 & June 14-1910. The patent date on the Tucker is Nov. 25-1913.
I'm guessing that maybe this slide plate and the goodies would fit on a Singer 27 or 28?
Can anybody confirm or deny that?
Thanks,
Joe
#2
Short shanks...so any machine that takes a short shank. The #3 is adjustable via the thumb screw.... Can't tell you what the plate fits other than if it was a Singer, it should have "Simanco" on it somewhere.
#3
Super Member
Thread Starter
Join Date: Feb 2012
Posts: 8,091
Yep, I realized that would be the short answer after I posted the question. I should have worded it differently. I've got a bunch of rufflers, a few tuckers and some other things. What I'd like to have an under braider for a round bobbin Singer.
No makers name on the slide plate. Only the number 555C4 stamped on the back.
Joe
No makers name on the slide plate. Only the number 555C4 stamped on the back.
Joe
#4
Super Member
Join Date: Oct 2010
Location: Prescott Valley, AZ
Posts: 1,329
I suspect the slide plate number should read 55504. If so, it's the front plate for models 127 and 128. The dimensions are right also.
I had to buy that part for my 127.
I had to buy that part for my 127.
Last edited by ShirlinAZ; 04-01-2012 at 07:06 AM.
#5
Yep, I realized that would be the short answer after I posted the question. I should have worded it differently. I've got a bunch of rufflers, a few tuckers and some other things. What I'd like to have an under braider for a round bobbin Singer.
No makers name on the slide plate. Only the number 555C4 stamped on the back.
Joe
No makers name on the slide plate. Only the number 555C4 stamped on the back.
Joe
#6
Super Member
Thread Starter
Join Date: Feb 2012
Posts: 8,091
I'll mark it as a front plate for the 127 / 128.
Charlee,
That one fits the shuttle machines. When I watched Muv's video the round bobbin under braider used a thumb screw to hold it. This one has clips that match the front slide plate in the picture.
Joe
Thread
Thread Starter
Forum
Replies
Last Post
Macybaby
For Vintage & Antique Machine Enthusiasts
7
08-17-2014 08:39 AM
Macybaby
For Vintage & Antique Machine Enthusiasts
14
06-13-2014 06:52 AM
Ccorazone
For Vintage & Antique Machine Enthusiasts
1
04-25-2012 02:27 PM
sunnyhope
Main
9
04-20-2009 11:46 AM