White 765
#1
Member
Thread Starter
Join Date: Apr 2020
Posts: 2
White 765
I was gifted a white model 765 and it works beautifully. I was wondering if there is a way that I can slow the machine down. The foot control seems to function normally but no low end speed. I plugged the white into my pfaff 130 foot control control and that worked well as far as slower speed. I have considered an electronic pedal but I cannot find one that is rated to handle the 1.7 amp motor on the White. Any suggestions? Best regards, Tom
#2
Super Member
Join Date: Mar 2016
Posts: 2,890
Your controller probably needs adjusting. Older controllers were made to have both slow and high speed. As they get older, the parts don't move as they should. Andy Tube does a Singer 401 controller rebuild on youtube. It just involves cleaning and lubricating, if I remember correctly. (I have a 401 controller that wouldn't do low speeds.) I would assume your controller works the same way.
bkay
bkay
#3
Member
Thread Starter
Join Date: Apr 2020
Posts: 2
Foot control
Your controller probably needs adjusting. Older controllers were made to have both slow and high speed. As they get older, the parts don't move as they should. Andy Tube does a Singer 401 controller rebuild on youtube. It just involves cleaning and lubricating, if I remember correctly. (I have a 401 controller that wouldn't do low speeds.) I would assume your controller works the same way.
bkay
bkay