HELP! What is this thingy?
#1
Super Member
Thread Starter
Join Date: Mar 2012
Location: Southeast Georgia
Posts: 2,526
HELP! What is this thingy?
I just bought a mid 50's Japanese machine. This was attached to the back part of the cabinet. It appears to control the motor speed maybe? When I plug the machine in, it takes off like a 747. There is no way to stop it, other than unplug it. Anyway, my question is, what is this and where can I find another one? Thank you all. I know you will know![ATTACH=CONFIG]360855[/ATTACH]
#2
Super Member
Join Date: Feb 2012
Posts: 8,091
Those are ancient cord plugs and are all but unobtainium. You'd be better off getting a new cord block from Sew-Classic { http://www.shop.sew-classic.com/ } and rewiring the motor and light for regular two prong AC plugs. The reason your motor won't slow down is that it's not being controlled by the foot controller. It's getting full voltage.
If you don't have a foot controller, Sew-Classic has those too.
Joe
If you don't have a foot controller, Sew-Classic has those too.
Joe
#3
Super Member
Thread Starter
Join Date: Mar 2012
Location: Southeast Georgia
Posts: 2,526
There are 2 regular 2 prong ac plugs hanging from under the machine on very short cords. What do I ask for from Sew Classic. I would rather have a regular foot control than have to use the knee control thing. How do I go about attaching a foot control? This machine just screams 1950s, so I've got to get it going. This is my first attempt at repair/restore, so I know I must appear really stupid. It's just that I really don't know what all of these things are and what they are supposed to do. Thanks for any help you can give me! Sandy
#4
Super Member
Join Date: Nov 2010
Location: Cadillac, MI
Posts: 6,487
you're braver than I am to plug those in. Not the connectors, but the frayed cords. I have those connectors on my 1926 White Rotary, but I haven't inspected it carefully yet so I don't know what is what.
#5
Super Member
Join Date: Feb 2012
Posts: 8,091
Sandy,
Foot controller = Part # SCE 507 { http://www.shop.sew-classic.com/Foot...TAL-SCE507.htm }
Cord block set = Part # SCE 143 { http://www.shop.sew-classic.com/Cord...143-SCE143.htm }
If you order the cord block and the foot controller for an extra $2.99 Sew-Classic will wire them together for you.
{ http://www.shop.sew-classic.com/Foot...SCE-Wiring.htm }
They are easy to do if you're handy with a screw driver and pliers.
The two prong plugs from the motor and light, will plug into the receptacles on the cord block. They are labeled so it's easy to know which goes where.
Joe
Foot controller = Part # SCE 507 { http://www.shop.sew-classic.com/Foot...TAL-SCE507.htm }
Cord block set = Part # SCE 143 { http://www.shop.sew-classic.com/Cord...143-SCE143.htm }
If you order the cord block and the foot controller for an extra $2.99 Sew-Classic will wire them together for you.
{ http://www.shop.sew-classic.com/Foot...SCE-Wiring.htm }
They are easy to do if you're handy with a screw driver and pliers.
The two prong plugs from the motor and light, will plug into the receptacles on the cord block. They are labeled so it's easy to know which goes where.
Joe
#7
Super Member
Join Date: Jan 2011
Location: Sierra Vista, AZ
Posts: 3,992
Sure would like to see pics of your 57 Chevy. Those plugs, I think they are called Chicago plugs, were the state of the art in the 20s and 30s. As Joe mentioned the are unobtainable. The wiring is always bad because it is old, old, old. It is a good thing that you did not get an electrical shock.
#8
Super Member
Join Date: Feb 2012
Posts: 8,091
The bad thing is I have a FREE Sewing Machine Co. ( pre Free Westinghouse ) that I need some of those plugs for.
I had to rewire it in a modern manner but I so wanted to do it as it was. Alas, no plugs like that to be had.
Joe
I had to rewire it in a modern manner but I so wanted to do it as it was. Alas, no plugs like that to be had.
Joe
#9
Super Member
Thread Starter
Join Date: Mar 2012
Location: Southeast Georgia
Posts: 2,526
Hi, Caroline. I couldn't get the pics to upload into this thread, so I had to start a new one. Joe told me which parts I needed to replace the electrical thing and now I'm waiting on them to come. I need whatever it is that regulates the speed of the motor, because right now, she only runs at full tilt. Can't wait for the new parts to come because I'm dying to sew on her!
Thread
Thread Starter
Forum
Replies
Last Post
J Miller
For Vintage & Antique Machine Enthusiasts
32
09-01-2013 05:51 PM