J Miller

A walking foot, nope. Only one we have is a low shank one.

The only problem I have is when doing the decorative stitching. Actually sewing the seams is no problem. When the machine is feeding real slow, like satin stitches for the decorative patterns, it has trouble moving the seamed area under the foot. I think it's because of the tiny little stitches just not moving the bulk of the seam.

As I've been doing this I've found this problem with several machines. Only a couple will cruise over the seams when on satin stitch settings.


Joe

Candace

The correct foot for the job makes a big difference. I would suggest investing in a walking foot. I don't have the problems you're having.

J Miller

Suggest me a good one to put on the "must buy" list.

Joe

Candace

I use the vintage walking foot that was made for the 401. Like this one http://www.ebay.com/itm/Singer-Smoot...#ht_866wt_1206

Really, any quilting should be done with a walking foot as it helps feed the layers through together without shifting or catching of the fabric. Of course the pressure on the presser foot would still need adjustments. They're not that expensive.

J Miller

Candace,

Thanks for the link. We are going to try an experiment before buying one like that.

We have a walking foot attachment for the low shank machines so we're going to try that one on my squares.
If it works then we'll snag one for the 401 and our other slant shankers.

Joe

kitsykeel

Joe,

I just found in my stuff an item I purchased a few years ago for this purpose. I don't remember where I got it, but it is call "Jean-a-ma-jig." I swear, it really is called that.

J Miller

I've heard of that one too. Will keep my eyes open and maybe pick one up.


Joe