Go Back  Quiltingboard Forums >
  • Main
  • FMQ tension- bobbin thread laying on back on fabric >
  • FMQ tension- bobbin thread laying on back on fabric

  • FMQ tension- bobbin thread laying on back on fabric

    Thread Tools
     
    Old 02-03-2013, 05:11 AM
      #1  
    Super Member
    Thread Starter
     
    noveltyjunkie's Avatar
     
    Join Date: Jun 2010
    Location: 53 degrees North
    Posts: 1,679
    Default FMQ tension- bobbin thread laying on back on fabric

    I have done a search but can't find an answer to this one.
    I often have issues with my FMQ tension on my Brother NS 30.

    So today I decided to be methodical.

    Loaded up thread and bobbin and checked tension before changing to darning foot. It's all good. (So I am ruling out fluff issues, tension wheels, etc.

    Attached darning foot. Did not touch dogs, stich length or anything, tried sewing a straight line. Bobbin thread is laying on back.

    Adjusted tension. It stays exactly the same, whether I crank it right up, or right down.

    And yes, my foot was down when I was sewing- my machine has a warning beep for that.

    This issue is haunting me. People say practice practice, but what is the point of practicing when I know from the get go that it is going to look bad because of the tension problems and I will never be able to FMQ with confidence because I have a techinical problem?

    Please suggest what I could try to fix this!
    Thank you.
    noveltyjunkie is offline  
    Old 02-03-2013, 05:17 AM
      #2  
    Super Member
     
    Join Date: Oct 2010
    Location: howell, Mi
    Posts: 2,345
    Default

    If you have turned the tension all the way up and still have the problem, it sounds like you need to very carefully raise the tension on your bobbin case. That is the last step to try and takes a very tiny turn of the screw. I have only had to do that a couple of times in many years of sewing. Be very careful, as the screw is very small and easy to loose. Having loose bobbin threads is a very frustrating problem. Good luck.
    Sue
    susie-susie-susie is offline  
    Old 02-03-2013, 05:48 AM
      #3  
    Power Poster
     
    Join Date: Mar 2011
    Location: Ontario, Canada
    Posts: 41,535
    Default

    Does your bobbin case have a screw? If so make a note of where the slit in the screw is by the hands of a clock before you move it. Set your top tension back to factory setting (my machine has a line by that setting) and then adjust the bobbin tension a little at a time. Different thickness of bobbin thread can effect your tension too.
    Tartan is offline  
    Old 02-03-2013, 06:00 AM
      #4  
    Super Member
     
    Mitch's mom's Avatar
     
    Join Date: Jan 2011
    Location: TN
    Posts: 1,443
    Default

    Before you change the tensions, a word of caution/advice. I have a Brother PC-6500 that will NOT free motion quilt. It is a known issue with the machines. It isn't a flaw with the machine it is just a characteristic. Yours may be the same way.
    Mitch's mom is offline  
    Old 02-03-2013, 06:45 AM
      #5  
    Senior Member
     
    Join Date: Jul 2010
    Posts: 321
    Default

    Have you tried setting the stitch length to zero?

    For my Janome, I got a special bobbin case that is for FMQ--the tension is adjusted properly for that, so I just change the bobbin case when I'm ready to FMQ. I don't know if Brother has a FMQ bobbin case, but I think I would invest in a separate bobbin case, set for FMQ, rather than constantly changing the bobbin tension. Good luck.
    WandaVA is offline  
    Old 02-03-2013, 06:45 AM
      #6  
    Super Member
    Thread Starter
     
    noveltyjunkie's Avatar
     
    Join Date: Jun 2010
    Location: 53 degrees North
    Posts: 1,679
    Default

    Thank you all!!!

    Originally Posted by susie-susie-susie
    If you have turned the tension all the way up and still have the problem, it sounds like you need to very carefully raise the tension on your bobbin case.
    Originally Posted by Tartan
    Does your bobbin case have a screw? If so make a note of where the slit in the screw is by the hands of a clock before you move it. Set your top tension back to factory setting (my machine has a line by that setting) and then adjust the bobbin tension a little at a time. Different thickness of bobbin thread can effect your tension too.
    But there is no problem at all with my tension when I do normal sewing or piecing. Do you still think that there could be a problem with the bobbin tension arising just from the darning foot? (Is so, how would it happen?)
    Ditto on the threads. They were working just fine with the normal foot. It only went mad when I changed the foot (and nothing else)

    Last edited by noveltyjunkie; 02-03-2013 at 06:58 AM.
    noveltyjunkie is offline  
    Old 02-03-2013, 06:53 AM
      #7  
    Super Member
    Thread Starter
     
    noveltyjunkie's Avatar
     
    Join Date: Jun 2010
    Location: 53 degrees North
    Posts: 1,679
    Default

    Originally Posted by Mitch's mom
    Before you change the tensions, a word of caution/advice. I have a Brother PC-6500 that will NOT free motion quilt. It is a known issue with the machines. It isn't a flaw with the machine it is just a characteristic. Yours may be the same way.
    Well if it is a characeristic, it is not mentioned anywhere in the paperwork- does yours state that up front? I'd be very disappointed if that was the case, because when I bought it I said I wanted it for FMQing as well as other things.
    noveltyjunkie is offline  
    Old 02-03-2013, 06:56 AM
      #8  
    Super Member
    Thread Starter
     
    noveltyjunkie's Avatar
     
    Join Date: Jun 2010
    Location: 53 degrees North
    Posts: 1,679
    Default

    Originally Posted by WandaVA
    Have you tried setting the stitch length to zero? .
    Same problem no matter what the stitch length!

    Originally Posted by WandaVA
    For my Janome, I got a special bobbin case that is for FMQ--the tension is adjusted properly for that, so I just change the bobbin case when I'm ready to FMQ. I don't know if Brother has a FMQ bobbin case, but I think I would invest in a separate bobbin case, set for FMQ, rather than constantly changing the bobbin tension. Good luck.
    OK so this sounds like the same idea as from the first two replies- that FMQ actually does require a different bobbin tension. I never knew that. Does everyone have to do this? How tedious!
    noveltyjunkie is offline  
    Old 02-03-2013, 06:58 AM
      #9  
    Super Member
     
    Buckeye Rose's Avatar
     
    Join Date: Jan 2011
    Location: Monroe, IN
    Posts: 2,283
    Default

    My Janome 6600 is in for a tune up and the same tension issues. Clerk showed me the fmq bobbin case and how it works, said it is a very common issue for lots of machines. I understand your frustration. If you bought from a dealer, call them or take machine to show them what it does....they may have some good advice to fix the problem.
    Buckeye Rose is offline  
    Old 02-03-2013, 07:00 AM
      #10  
    Power Poster
     
    Join Date: Mar 2011
    Location: Ontario, Canada
    Posts: 41,535
    Default

    I sometimes have to adjust the tension in my bobbin case between quilting with my walking foot on my quilt sandwich and FMQ. I do have adjust my bobbin tension between regular piecing and quilting on a quilt sandwich. As mentioned though, if you know where the bobbin screw STARTED before you adjusted it, you can move it back if that is not the problem.
    Tartan is offline  
    Related Topics
    Thread
    Thread Starter
    Forum
    Replies
    Last Post
    cricket_iscute
    Main
    12
    12-31-2014 07:29 PM
    Ruby the Quilter
    Main
    8
    05-11-2013 09:28 AM
    JanTx
    Main
    12
    05-28-2012 09:03 AM
    Dolphyngyrl
    Main
    1
    03-17-2012 10:52 AM

    Posting Rules
    You may not post new threads
    You may not post replies
    You may not post attachments
    You may not edit your posts

    BB code is On
    Smilies are On
    [IMG] code is On
    HTML code is On
    Trackbacks are Off
    Pingbacks are Off
    Refbacks are Off



    FREE Quilting Newsletter