Frustrated
#1
Super Member
Thread Starter
Join Date: Jan 2010
Location: Kansas City Mo
Posts: 1,603
Frustrated
I was sewing along Friday when all of a sudden my needle broke on my Brother sewing machine for some reason the bobbin housing was also coming out. Can anyone give me any advise as to how to fix this problem? I changed the needle I also checked to make sure I had got all the needle parts out. I also have a new singer with the very same problem right now the singer bobbin seems to be jamned and out of place I can't even get the bobbin out at all. This is so frustrating I am careful not to sew over pins . My dgd is always sewing over pins and ect with her brother and she never has any problem with her machine. I really need to get my machine up and running.. My late dh always told me if it is mechanicle to just leave it alone and he would take care of it when he got home because I would mess it up big time. lol
#4
I am not familiar with your make of machine, but in your tool box there should be a small screw driver. In the foot plate where your needle goes into to get the bobbin thread there are a couple of screws. Undo those and take the foot plate off and have a look inside. There could be fluff or thread inside causing loss of freedom for the bobbin to turn. or maybe a small fragment of your broken needles. Get the brush supplied in the tool box and give it a clean as best you can. My bobbin housing comes right out and I can clean under neath it. Be careful when replacing the bobbin housing, there is a way to do it so it fits snugly. Before reassembling completely, test things are OK by gently turning the fly wheel of the machine and see what happens. Then try it with a needle in place and again gently turn the fly wheel and listen and look at what is happening. I agree with "Just me" in that you should use recommended bobbins for your different makes of machine. I hope this helps, all I can say is if you are brave enough to have a look go ahead, but if you are too nervous, it's a trip to your local machine shop I guess. Good luck. Let us know how you get on.
#6
Did you take it out recently and put the bobbin area back together, my guess is you put it back together wrong. I did that with my babylock and the needle and thread were jamming, my suggestion to you is to take it all apart, clean it out get you manual out and put it back together like it says, if you put it back together in the wrong order you will have problems.
#7
All great advice above ... start by taking the plate off and giving the bobbin area a thorough cleaning.
Not familiar with your machine, but in addition to having the wrong bobbin in the machine, you might also have placed it in upside-down (my Husky has a up and a down side bobbin). Generally if the bobbin has a up and a down side, the up side is marked some how.
Not familiar with your machine, but in addition to having the wrong bobbin in the machine, you might also have placed it in upside-down (my Husky has a up and a down side bobbin). Generally if the bobbin has a up and a down side, the up side is marked some how.
#8
The bobbin thread should pull out clockwise. And when you broke the needle. You may have knocked it out of time. And only a repair man can fix that. A good shuttle cleaning may be needed.Hopefully it is a simple fix.
Thread
Thread Starter
Forum
Replies
Last Post
Snorky Lvs2Quilt
Main
16
04-21-2011 09:57 PM
Flying_V_Goddess
Main
22
03-19-2008 03:25 PM