frustrated
#11
Member
Thread Starter
Join Date: Mar 2007
Posts: 35
I just want to say thank-you to everyone that responded to my problem. I know there are many other majors issues in life, so i really appreciate all the input and am grateful for all the suggestions. What a wonderful resource this site is!!
#12
Member
Thread Starter
Join Date: Mar 2007
Posts: 35
no I haven't. tried denim needles and top stictching needles. So far nothing has worked. Am taking machine in tomorrow for overhaul and cleaning. I am really afraid it is going to come down to the batting. This is the first time I used something other than warm and natural. Am considering taking it to a long arm quilter to finish as I am under deadline to give as shower gift. maybe a more powerful machine is the answer, I really do appreciate all the nice people and helpful suggestions.
#13
Originally Posted by vandeaner
after 3 years of free motion quilting my world has turned topsy turvy!!
I am finishing a baby quilt and was going to free motion the corners around an appliqued area. I can only go 10 stitches without the thread shredding and breaking. I am using a polyester batting for a puffier look. I usually use warm and natural. I have completed all the stitching in the ditch area with no problems but NOW!!
Here are some of the things I tried to fix problem
cleaned machine, changed thread , changed needle, changed tension and foot pressure.
My machine is a husquavarna lily 545
Help---- if anybody has any further suggestions it sure would be a blessing
MY KINGDOM FOR A SUCCESSFUL FINISHED QUILT!!!!!
I am finishing a baby quilt and was going to free motion the corners around an appliqued area. I can only go 10 stitches without the thread shredding and breaking. I am using a polyester batting for a puffier look. I usually use warm and natural. I have completed all the stitching in the ditch area with no problems but NOW!!
Here are some of the things I tried to fix problem
cleaned machine, changed thread , changed needle, changed tension and foot pressure.
My machine is a husquavarna lily 545
Help---- if anybody has any further suggestions it sure would be a blessing
MY KINGDOM FOR A SUCCESSFUL FINISHED QUILT!!!!!
I went to a sewing machine maintenance class last night and learned alot of interesting things... here is one thought that could be causing your problem. The eye in your needle is not big enough. To test this cut a piece of your thread you will be using. Using the needle you plan to use thread the needle with the cut piece of thread (your needle at this point is not in the sewing machine, but in your hand). hold the thread with one hand on one end of the thread, and the other hand holding the other side of the thread. Have your needle slide move up and down on the thread. If the needle is having trouble sliding, it means that the thread might be too thick or have nobs on it to move properly through the needle, this means you will need a bigger eye in the needle.
I also learned to use a free standing thread holder along the side of your machine so that the thread comes off the spool smoother and easier. Thread likes to be in a fertical position rather than a horizontal position.
Hope this helps!! Good Luck!
#17
I was having the same problem when I first starting quilting, and a good experienced quilting buddy advised me to use an embroidery needle (red) as they have larger eyes, and a groove which doesn't create as much friction on the thread, and its been great ever since. Hope this helps
#18
Super Member
Join Date: Mar 2008
Location: Texas currently
Posts: 1,222
I had this same problem once. At the end of all frustrating and unsucessfull 'fixes', I found my problem The thread I had purchased and used sucessfully for half the quilt looked like it was would onto the spool way too tightly during the first half of the manufacturing process. I checked this out by putting on my bobbin winder and watched the spool only while winding the bobbin. Sure enough, the spool would jerk and halt while the thread was coming off it, like it was stuck between the other threads on the spool. I actually can't even use this spool for regular sewing, due to the jerkiness of the thread coming off the spool. Although it cost over $5/spool and I had two of them, I finally decided to toss them. But, cheap as I am, I marked the labels with felt pen and just use those spools now for hand sewing.
Thread
Thread Starter
Forum
Replies
Last Post
Snorky Lvs2Quilt
Main
16
04-21-2011 09:57 PM
Flying_V_Goddess
Main
22
03-19-2008 03:25 PM