Go Back  Quiltingboard Forums > Main
InkJet printed quilt labels..how do they hold up? >

InkJet printed quilt labels..how do they hold up?

InkJet printed quilt labels..how do they hold up?

Old 04-24-2013, 06:25 PM
  #1  
Junior Member
Thread Starter
 
Join Date: Oct 2012
Location: North Dakota
Posts: 258
Default InkJet printed quilt labels..how do they hold up?

I have this neat idea for a label for a quilt I made for my husband. Its very special and its for him when he has to go away on trainings as he is in the military. It will be a picture of us as we were holding hands walking down a park path and on the center of the photo is the words of our wedding vows...the picture is in black and white... I have seen on youtube how you can print on fabric...does anyone know how well the ink stays on after washes or will this all fade after a year and look like trash? They say once the ink sets it is permanent, but I assume it will fade after time, I wonder how fast it will fade, like a year or two?
I want to have the picture & writing be the center part of the block....this label/finished block will go onto the backing of the quilt on the top and center, so every time he covers up he can read our wedding vow & a little love note from me...Any help will be greatly appreciated. Thanks much! I have never done this before so it will be a new thing for me to try it.
Attached Thumbnails cluster.gif  

Last edited by QuiltingByCourtney; 04-24-2013 at 06:33 PM.
QuiltingByCourtney is offline  
Old 04-24-2013, 07:56 PM
  #2  
Senior Member
 
Join Date: Apr 2012
Location: Spokane, Washington
Posts: 344
Default

I made a quilt using photos from our son's wedding. They were printed on an ink jet printer. The kids have had the quilt for 4 years and it has had a lot of use. It lays over the back of their sofa and gets pulled down to cover sleeping children (or Mom or Dad) and has even been used for "tent building" by our grandsons. The quilt has been washed numerous times and the photos, although faded, are still very much visible. Our daughter in law says it's starting to look like the photos are sepia-toned and she loves it! I think our idea is great!
spokanequilter is offline  
Old 04-25-2013, 04:41 AM
  #3  
Senior Member
 
GemState's Avatar
 
Join Date: Nov 2010
Location: Northern Idaho
Posts: 476
Default

What I have found is to heat set what you have printed by ironing it several times, let it sit for a day or two, iron it some more. After a day or two you can spritz it with water and iron it again. It you put water on it right away after printing it will run and smear. I have labels I have washed several times. They do fade a little but stay pretty OK.
GemState is offline  
Old 04-25-2013, 09:15 AM
  #4  
Super Member
 
Join Date: Aug 2010
Location: Piedmont Virginia in the Foothills of the Blue Ridge Mtns.
Posts: 8,562
Default

Your question made me get up and look at the label on a quilt that I have hanging on my studio wall. It was made in 1993 and labeled with an HP injet printer, has been washed several times over the years, and is still going strong, clear, easily readable. That's 20 years of "last-ability"!

Jan in VA
Jan in VA is offline  
Old 04-25-2013, 06:03 PM
  #5  
Super Member
 
Join Date: Feb 2013
Location: Rapid City, SD
Posts: 4,961
Default

That is nice to know - I just bought myself a printer so hope to do this process one of these days.
Nammie to 7 is offline  
Old 04-25-2013, 06:15 PM
  #6  
Junior Member
Thread Starter
 
Join Date: Oct 2012
Location: North Dakota
Posts: 258
Default

I just printed a label. It was a black and white picture with wording on it, it turned out great. I saw this tutorial on youtube and it was super easy.

Steps: take an 8x10 plain sheet of printer paper, then I taped (I didn't have a glue stick) freezer paper which was a slight bit smaller then my 8x10 piece of paper to it with the shiny side facing me...then I took my fabric and placed it on the freezer paper where I wanted my picture to print, turned it all upside down then ironed it because you don't want that shiny wax to get on your iron...then I flipped it over made sure my fabric was nice and tacked down temporarily, put it in my printer and hit print! It came out nice! then I pealed my fabric off the freezer paper, and put it on my ironing board and ironed it to set the ink...I am going to iron it again tomorrow before I put the piece of fabric in the washing machine because I want to make sure the ink stays before I put it on into my quilt pieced backing.
QuiltingByCourtney is offline  
Old 04-26-2013, 01:25 PM
  #7  
Junior Member
 
SandiGrove's Avatar
 
Join Date: Nov 2012
Location: Brisbane Australia
Posts: 109
Default

Originally Posted by GemState View Post
What I have found is to heat set what you have printed by ironing it several times, let it sit for a day or two, iron it some more. After a day or two you can spritz it with water and iron it again. It you put water on it right away after printing it will run and smear. I have labels I have washed several times. They do fade a little but stay pretty OK.
This is the way to go! Don't iron backwards & forwards just press with a hot iron to set the ink bubbles into the fabric - I do all the above then wash it before I sew it on - just in case lol
SandiGrove is offline  
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
SylvieJ
Main
17
05-13-2018 05:12 AM
meant2be
Main
20
12-10-2017 05:53 PM
d.rickman
Tutorials
17
05-02-2017 02:33 PM
matraina
Main
7
08-18-2015 01:41 PM
littlebitoheaven
Main
5
04-09-2015 08:02 AM

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


FREE Quilting Newsletter