Machine Applique Help Please
#2
I am not sure, since it is the default stitch on the machine. BUt I will look tonight and let you now. Also maybe you could try to ease the tension setting a little. My machine is set on 4 but sometimes if I am doing the blanket stitch or a decorative stitch, I may move it to 1 or 2. See if that helps.
#3
Well donīt know if this will help. I have a Brother Innovis 1200 and it is automatically set to the following 2.5 stitch width, 2.5 stitch length and 4.00 for the tension. I think you may have to play around a little but if it is puckering it could be your tension. Hope it helps. Elle
#6
i iron freezer paper to the back of the background when i machine applique. prevents both shifting and puckering. comes right off when i use the satin stitch. still fairly easy to remove when i use other stitches.
#7
I think your puckering comes from not using interfacing. My own preference is a sturdy tear-away. Another helpful trick is to baste close to the edge before doing a satin stitch that will cover it. Practice first. Once you get the settings that work best for you, make a little note of settings and stabilizers for next time.
#10
Hi Everyone!
I have a question about invisible machine applique. It is my first attempt and it's going as well as can be expected. My question is about winding invisible thread on the bobbin. My bobbin conks out on me before the thread is fully used. When there is about 1/4 full bobbin, the machine just locks up and won't go until I put a fresh bobbin in. This is not such a big deal but it does seem a waste of good thread since I have to unwind the last 1/4 of every bobbin and toss it in the trash. Has anyone had to deal with this issue and if so, what do you think?
Thanks!
Juli
I have a question about invisible machine applique. It is my first attempt and it's going as well as can be expected. My question is about winding invisible thread on the bobbin. My bobbin conks out on me before the thread is fully used. When there is about 1/4 full bobbin, the machine just locks up and won't go until I put a fresh bobbin in. This is not such a big deal but it does seem a waste of good thread since I have to unwind the last 1/4 of every bobbin and toss it in the trash. Has anyone had to deal with this issue and if so, what do you think?
Thanks!
Juli
Thread
Thread Starter
Forum
Replies
Last Post
craftybear
Links and Resources
1
10-25-2011 03:58 PM
MaryKatherine
Pictures
138
05-10-2011 05:05 AM
craftybear
Main
22
07-06-2010 05:51 PM