Mid arm quilting thread bobbles

Reply Subscribe

Page 2 of 2

Thread Tools

09-26-2010, 08:01 PM

#11

Quiltforme

Super Member

Join Date: Aug 2010

Location: Beautiful Washington state!

Posts: 3,203

http://www.daystyledesigns.com/magicgeniewashers.htm
here is the link for the bobbin genie. also the site that where I got the long arm information.

09-26-2010, 09:27 PM

#12

dgmoby

Senior Member

Join Date: Jan 2010

Location: Austin, TX

Posts: 547

Quote:

Originally Posted by DeneK

I am interested in this topic too... I have a HandiQuilter and the same thing happened to me (also a Janome 1600P). It seems I remember from a previous topic that this Janome model is picky about the kind of thread. I spent quite a while looking at threads online today. The Superior thread site said that problems like this are often mismatched thread size and needle size. I am going to try another brand of thread when I get another top ready to quilt. The last one is sitting on the shelf because I need to remove all the stitching since I have all those bird's nests on the back.

Will be interested to see what everyone has to say.

Do you belong to the HQ16 Yahoo Group? It's a great place to get advice/help for these machines. For the HQ, your issue most likely is not pulling, then holding, the bobbin thread firmly while taking the 4-5 tacking stitches to secure the threads before moving on. Of course, this assumes the beginning of a line of thread is the only time you see these little balls. The 2nd most common thing would be tension issues.

Come join our HQ16 group - we're a great group and a wonderful resource (and there are Yahoo Groups for the majority of other machines as well, which I'd recommend to all machine owners with any sort of questions!).

On the Jamone, it may also be not holding the bobbin thread until the tacking stitches are complete. If not held firmly, the excess will create a birds nest or a small ball of thread. So, if you hold the threads firmly (pulling on the bobbin thread to ensure it's taunt) and you hold them until the 4-5 stitches are complete, then your issue should be resolved. Try it and see if that helps. If not, let us know!

Debbie in Austin

09-27-2010, 02:01 AM

#13

Annya

Super Member

Join Date: Jun 2010

Location: Queensland Australia

Posts: 1,388

Do you pull up the bottom thread before you start to sew? I would also suggest that you test on a piece similar to what you are going to work on. Practice on your sample first and see if it does it there.The other thing is to go back to where you got it and ask them to help you fix the problem. If you are like me you will be friends with them and they are willing to help you..

09-27-2010, 04:38 AM

#14

Barb_MO

Super Member

Join Date: Nov 2009

Location: Missouri

Posts: 2,485

Quote:

Originally Posted by Illsa

I have Janome 1600P and when I begin quilting I get a thread ball at the bottom of the quilt. Occ it knots so badly it won't move and I have to crawl under to get the bobbin out and begin cutting threads to resolve the gunoidulum.
Anybody have thoughts on WHY????????????????????
I HAVE OILED, CHANGED NEEDLES, ADJUSTED TENSION BOTH BOBBIN AND UPPER.
HELP ILLSA

I have this same machine on a frame. When this happens to me it is when I forget to lower the presser foot.

09-27-2010, 04:44 AM

#15

Donnamarie

Senior Member

Join Date: Jun 2009

Location: Woburn, MA

Posts: 711

Be sure it is threaded correctly. When my thread bunches up on the bottom it is a sure sign that it is not threaded properly. Good luck.

09-28-2010, 01:25 AM

#16

jitkaau

Super Member

Join Date: Aug 2010

Location: Australia

Posts: 4,116

Quote:

Originally Posted by Illsa

Just a thought that I had this happen once and it turned out that when I actually changed the bobbin, the problem stopped. Somehow, the bobbin itself was a bit crooked and caused this problem.

09-28-2010, 01:32 AM

#17

jitkaau

Super Member

Join Date: Aug 2010

Location: Australia

Posts: 4,116

Quote:

Originally Posted by Illsa

Sometimes I can ignore the thread balls and continue sewing and the stitches are perfect for a long time like one row of 86" quilt before it shreds the thread or breaks the thread. Completely baffles and frustrates me when it can work perfect then screw up. Machines aren't supposed to do that I didn't think.

If the cotton is shredding as well, it indicates that the needle hole is too small for the weight of cotton that you are using. Try a top stitch or metalic thread needle (they are the same needle in any case), as they have a longer hole and a groove at the back to house the thread as it goes into the fabric. Number 12 weight cotton is the thickest that you can use if going through a sewing machine needle.

10-02-2010, 01:30 PM

#18

Illsa

Junior Member

Thread Starter

Join Date: Jun 2010

Posts: 119

Thank you for the input but I think it is a problem with the machine as all of the above are correct. I thread with presser ft. up, pull up bobbin thread, tuck bobbin thread under the foot with top thread do few tacking stitches. The dealer came to my home and said it needed to be sent in so it is going on Monday. Illsa

10-06-2010, 09:24 PM

#19

Illsa

Junior Member

Thread Starter

Join Date: Jun 2010

Posts: 119

I have the auto cutter on the 1600P Janome and the thread is barely visible sticking out of the fabric. No way could I hold it. It doesn't make bird nests every time. It has a mind of its own.
My dealer came to my home and watched me quilt and said it needed to be sent in to company for repair so now it is gone and I'm UNSEWING. Thanks for your thoughts. Illsa