Go Back  Quiltingboard Forums >
  • Main
  • Need advise on cutting long pieces of material >
  • Need advise on cutting long pieces of material

  • Need advise on cutting long pieces of material

    Thread Tools
     
    Old 01-19-2013, 09:35 AM
      #1  
    Junior Member
    Thread Starter
     
    Join Date: Oct 2012
    Location: at the foot of the Ouichita Mountains, SE Oklahoma
    Posts: 273
    Default Need advise on cutting long pieces of material

    I am going to begin making a bridal quilt for my granddaughter that marries in May. (Getting a head start so won't be under a lot of pressure. LOL)

    It is the 'Country Bride Pattern', if you are familiar with it.

    My problem is that it's side borders are 2 cuts of 16 1/2 inches by 112 inches LOF. I have never cut that big of a piece before. I know I can fold it, but am so scared of cutting it with an elbow and ruining it. The only place I have to cut is on a table that is about 60-plus long and about 3 ft. wide.

    Any suggestions on how to do this? I'm going to get the material as soon as I get off the 'puter and am hoping someone has a solution.

    TIA
    dray965 is offline  
    Old 01-19-2013, 09:43 AM
      #2  
    Junior Member
     
    An Arm Long's Avatar
     
    Join Date: Nov 2011
    Location: Maryland's Eastern Shore
    Posts: 223
    Default

    Are you piecing the borders or cutting a piece that is one long length of fabric? I have folded up to 4 layers and cut very carefully without problems, but 2 layers is much better. You would have to move your cutting mat as you went along and check your layers to be sure that they have not moved. It would almost be easier to cut 40 inch sections crosswise and sew them together. It may depend on the pattern in your fabric as to whether you would want to do that.
    Beth
    An Arm Long is offline  
    Old 01-19-2013, 09:46 AM
      #3  
    Super Member
     
    Join Date: Sep 2010
    Location: Myrtle Beach, SC
    Posts: 8,138
    Default

    If you cut the fabric while it is folded, press the folds flat before you cut. It helps prevent the curve that usually occurs when you cut folded fabric. Hope this helps.
    cathyvv is offline  
    Old 01-19-2013, 10:11 AM
      #4  
    Super Member
     
    Join Date: Jun 2008
    Location: Utah
    Posts: 8,847
    Default

    I either rip it (although I know some cringe at the thought) or I cut the length of my ruler then carefully move the ruler and/or fabric and continue cutting till I have the length needed.
    quiltsRfun is offline  
    Old 01-19-2013, 10:13 AM
      #5  
    Super Member
     
    EasyPeezy's Avatar
     
    Join Date: Mar 2010
    Location: Canada
    Posts: 3,460
    Default

    When I cut long borders, I mark it with a pencil and ruler then cut with the rotary cutter
    and ruler (of course).
    Sometimes I put one or two paper weights on the fabric so it doesn't slide too much.
    I don't like to fold the fabric as I'm afraid of the dreaded "v".
    EasyPeezy is offline  
    Old 01-19-2013, 10:30 AM
      #6  
    Super Member
     
    dakotamaid's Avatar
     
    Join Date: Feb 2009
    Location: South central Nebraska, US
    Posts: 5,367
    Default

    Originally Posted by EasyPeezy
    When I cut long borders, I mark it with a pencil and ruler then cut with the rotary cutter
    and ruler (of course).
    Sometimes I put one or two paper weights on the fabric so it doesn't slide too much.
    I don't like to fold the fabric as I'm afraid of the dreaded "v".
    I have done this also. I lay it out on a long table, sometimes with hubby's help, and measure first, than cut moving the ruler along as I go, I just move the ruler 1/2 way at a time which helps keep me lined up with the already cut edge. Clear as Mud??
    dakotamaid is offline  
    Old 01-19-2013, 11:17 AM
      #7  
    Senior Member
     
    Join Date: Dec 2012
    Posts: 381
    Default

    I am of the school that rips. Cutting borders that long usually doesn't turn out well. It is a good idea to carefully press and starch the fabric before ripping that long a piece as the tearing distorts the fabric. After it is ripped press it again. I worked for almost two years for a shop that did custom dressmaking and alterations. Straight of grain is a real deal breaker. If you ever owned a garment that just never hung right it is because it was not cut on the straight of grain. The only other thing you can do is pull a thread and carefully cut where the thread was removed from the fabric. Good luck.
    mpspeedy2 is offline  
    Old 01-19-2013, 11:52 AM
      #8  
    Super Member
     
    Join Date: Mar 2011
    Location: Central NJ
    Posts: 5,571
    Default

    Originally Posted by mpspeedy2
    I am of the school that rips. Cutting borders that long usually doesn't turn out well. It is a good idea to carefully press and starch the fabric before ripping that long a piece as the tearing distorts the fabric. After it is ripped press it again. I worked for almost two years for a shop that did custom dressmaking and alterations. Straight of grain is a real deal breaker. If you ever owned a garment that just never hung right it is because it was not cut on the straight of grain. The only other thing you can do is pull a thread and carefully cut where the thread was removed from the fabric. Good luck.
    Another ripper here under those conditions! I'd also rip an inch or so wider if possible just to be able to rid myself of the distortions. This can be done by pulling those outer most threads on either/both sides. A little tedious but definitely have straight grain when you're done.
    NJ Quilter is offline  
    Old 01-19-2013, 12:41 PM
      #9  
    Super Member
     
    Join Date: Feb 2010
    Location: Maryland
    Posts: 3,586
    Default

    I say rip it too! Much faster--more accurate.
    virtualbernie is offline  
    Old 01-19-2013, 01:57 PM
      #10  
    Senior Member
     
    Join Date: Apr 2010
    Location: Wichita Falls, TX
    Posts: 640
    Default

    I'd rip it, too, but I'd add an inch to the size being ripped. Then, after pressing, I'd cut a half inch off each edge to give a sharp cut and to remove some of the stretched edge.
    AudreyB is offline  
    Related Topics
    Thread
    Thread Starter
    Forum
    Replies
    Last Post
    Annie Pearl
    Main
    10
    03-03-2014 06:39 AM
    nightquilter
    Main
    31
    05-16-2011 02:51 PM
    S. Adkins
    Main
    13
    03-21-2010 08:06 AM
    beginnerquilter
    Main
    6
    01-17-2010 04:17 AM

    Posting Rules
    You may not post new threads
    You may not post replies
    You may not post attachments
    You may not edit your posts

    BB code is On
    Smilies are On
    [IMG] code is On
    HTML code is On
    Trackbacks are Off
    Pingbacks are Off
    Refbacks are Off



    FREE Quilting Newsletter