Need advise on cutting long pieces of material
#1
Junior Member
Thread Starter
Join Date: Oct 2012
Location: at the foot of the Ouichita Mountains, SE Oklahoma
Posts: 273
Need advise on cutting long pieces of material
I am going to begin making a bridal quilt for my granddaughter that marries in May. (Getting a head start so won't be under a lot of pressure. LOL)
It is the 'Country Bride Pattern', if you are familiar with it.
My problem is that it's side borders are 2 cuts of 16 1/2 inches by 112 inches LOF. I have never cut that big of a piece before. I know I can fold it, but am so scared of cutting it with an elbow and ruining it. The only place I have to cut is on a table that is about 60-plus long and about 3 ft. wide.
Any suggestions on how to do this? I'm going to get the material as soon as I get off the 'puter and am hoping someone has a solution.
TIA
It is the 'Country Bride Pattern', if you are familiar with it.
My problem is that it's side borders are 2 cuts of 16 1/2 inches by 112 inches LOF. I have never cut that big of a piece before. I know I can fold it, but am so scared of cutting it with an elbow and ruining it. The only place I have to cut is on a table that is about 60-plus long and about 3 ft. wide.
Any suggestions on how to do this? I'm going to get the material as soon as I get off the 'puter and am hoping someone has a solution.
TIA
#2
Are you piecing the borders or cutting a piece that is one long length of fabric? I have folded up to 4 layers and cut very carefully without problems, but 2 layers is much better. You would have to move your cutting mat as you went along and check your layers to be sure that they have not moved. It would almost be easier to cut 40 inch sections crosswise and sew them together. It may depend on the pattern in your fabric as to whether you would want to do that.
Beth
Beth
#5
When I cut long borders, I mark it with a pencil and ruler then cut with the rotary cutter
and ruler (of course).
Sometimes I put one or two paper weights on the fabric so it doesn't slide too much.
I don't like to fold the fabric as I'm afraid of the dreaded "v".
and ruler (of course).
Sometimes I put one or two paper weights on the fabric so it doesn't slide too much.
I don't like to fold the fabric as I'm afraid of the dreaded "v".
#6
I have done this also. I lay it out on a long table, sometimes with hubby's help, and measure first, than cut moving the ruler along as I go, I just move the ruler 1/2 way at a time which helps keep me lined up with the already cut edge. Clear as Mud??
#7
Senior Member
Join Date: Dec 2012
Posts: 381
I am of the school that rips. Cutting borders that long usually doesn't turn out well. It is a good idea to carefully press and starch the fabric before ripping that long a piece as the tearing distorts the fabric. After it is ripped press it again. I worked for almost two years for a shop that did custom dressmaking and alterations. Straight of grain is a real deal breaker. If you ever owned a garment that just never hung right it is because it was not cut on the straight of grain. The only other thing you can do is pull a thread and carefully cut where the thread was removed from the fabric. Good luck.
#8
Super Member
Join Date: Mar 2011
Location: Central NJ
Posts: 5,572
I am of the school that rips. Cutting borders that long usually doesn't turn out well. It is a good idea to carefully press and starch the fabric before ripping that long a piece as the tearing distorts the fabric. After it is ripped press it again. I worked for almost two years for a shop that did custom dressmaking and alterations. Straight of grain is a real deal breaker. If you ever owned a garment that just never hung right it is because it was not cut on the straight of grain. The only other thing you can do is pull a thread and carefully cut where the thread was removed from the fabric. Good luck.
Thread
Thread Starter
Forum
Replies
Last Post
Kooklabell
Main
36
08-03-2010 09:35 AM