Need strip widths for making tape with bias bars
05-18-2011, 08:14 PM
#11
Super Member
Thread Starter
Join Date: Mar 2007
Location: Wisconsin
Posts: 1,703
Originally Posted by charlotte625
all I can say ......is wow!
your wall hangings are awesome.
I tried my hand at Stained glass on my window
and decided...I don't have a steady enough hand
and with fabric ...I might have to try some day.
Be sure to post when your done I will be looking forward to seeing them.
your wall hangings are awesome.
I tried my hand at Stained glass on my window
and decided...I don't have a steady enough hand
and with fabric ...I might have to try some day.
Be sure to post when your done I will be looking forward to seeing them.
05-19-2011, 06:36 AM
#12
Super Member
Join Date: Oct 2009
Location: Maryland
Posts: 4,449
Originally Posted by Flying_V_Goddess
Originally Posted by roseOfsharon
The 1/8 would be cut at 3/8 .... what I had done with making the bias for my Celtic block ... was to cut a strip from card stock or 3x5 card at 3/8 and placed in the middle of the 3/8 cut and iron each side to the center. Making the 1/8 bias....
I am not sure what to tell you for the 3/16.... 5/16 and do the same I am guessing.
I used the mini iron by Clover to press my bias. Used a small ironing mat and sat and ironed away. I cut my bias from fat quarters/ you get quite a bit from one.
You may find it easier to work with short pieces than a really long one. Hide your starts and stops at a point where it is covered by an overpass or under another bias piece. I hope that makes sense.
I am not sure what to tell you for the 3/16.... 5/16 and do the same I am guessing.
I used the mini iron by Clover to press my bias. Used a small ironing mat and sat and ironed away. I cut my bias from fat quarters/ you get quite a bit from one.
You may find it easier to work with short pieces than a really long one. Hide your starts and stops at a point where it is covered by an overpass or under another bias piece. I hope that makes sense.
Here's an example of what I mean. This is the Ruto window I was talking about a couple posts ago. I marked some of the longer pieces of leading (I did miss marking her other arm). The leading I marked in red is the one I measured to be more than 40". Its 3/16" leading and I wonder if I pieced two strips together to get the desired length if the seam from joining them together would create too much bulk since the bias tape will be so thin.
[IMG]http://i132.photobucket.com/albums/q...s/RutoLINE.png[/IMG]
The red lines are continuous... ok but is it red around the face?
If not, you can do the red in two pieces... if I am seeing right.. and even if it is red around the face.... You can do each side up to the top of her head and the part that goes around her face (head) will cover the end piece of the other... do you see what I mean?
05-19-2011, 09:20 AM
#14
Super Member
Thread Starter
Join Date: Mar 2007
Location: Wisconsin
Posts: 1,703
Originally Posted by roseOfsharon
Originally Posted by Flying_V_Goddess
Originally Posted by roseOfsharon
The 1/8 would be cut at 3/8 .... what I had done with making the bias for my Celtic block ... was to cut a strip from card stock or 3x5 card at 3/8 and placed in the middle of the 3/8 cut and iron each side to the center. Making the 1/8 bias....
I am not sure what to tell you for the 3/16.... 5/16 and do the same I am guessing.
I used the mini iron by Clover to press my bias. Used a small ironing mat and sat and ironed away. I cut my bias from fat quarters/ you get quite a bit from one.
You may find it easier to work with short pieces than a really long one. Hide your starts and stops at a point where it is covered by an overpass or under another bias piece. I hope that makes sense.
I am not sure what to tell you for the 3/16.... 5/16 and do the same I am guessing.
I used the mini iron by Clover to press my bias. Used a small ironing mat and sat and ironed away. I cut my bias from fat quarters/ you get quite a bit from one.
You may find it easier to work with short pieces than a really long one. Hide your starts and stops at a point where it is covered by an overpass or under another bias piece. I hope that makes sense.
Here's an example of what I mean. This is the Ruto window I was talking about a couple posts ago. I marked some of the longer pieces of leading (I did miss marking her other arm). The leading I marked in red is the one I measured to be more than 40". Its 3/16" leading and I wonder if I pieced two strips together to get the desired length if the seam from joining them together would create too much bulk since the bias tape will be so thin.
[IMG]http://i132.photobucket.com/albums/q...s/RutoLINE.png[/IMG]
The red lines are continuous... ok but is it red around the face?
If not, you can do the red in two pieces... if I am seeing right.. and even if it is red around the face.... You can do each side up to the top of her head and the part that goes around her face (head) will cover the end piece of the other... do you see what I mean?
05-19-2011, 09:40 AM
#15
Super Member
Thread Starter
Join Date: Mar 2007
Location: Wisconsin
Posts: 1,703
Originally Posted by roseOfsharon
And if you are saying each piece for the side of her and her face/head are each 40" of bias... then work with three 40" pieces :) I don't think you will need to seam if done as such.
Sharon :)
Sharon :)
05-19-2011, 09:58 AM
#16
Super Member
Join Date: Mar 2011
Location: Pratt Kansas
Posts: 1,222
somewhere I saw how you make a continuous bias strip out of 1 yd of fabric.
Hmm trying to think it out. Maybe if you started with a longer length of fabric, the same as the WOF, you are going to use it all anyway, on your various projects.
cut the selvedges off your fabric. cut fabric in half diagonally.
now you have 2 "half squares" sew them together into a diamond, you know, the straight edges of the left one forms the left side of a "T", the right one forms an "L". sew the up & down edges together. The bias edges are to the left & right.
now bring the other straight edges together into a tube, offset it the amount you are cutting. So there's a leading "rabbit ear" and a trailing Rabbit ear, both the width you want to cut. you cut along the first bias edge, and end up at the trailing rabbit ear bias edge.
cut it on the width you want. The cut will spiral around the tube, on the bias. As big as this tube is, if you have a 12 or 18 inch mat, slide it into the tube & ruler cut it.
Since you are only using black, and you need a variety of widths, you could make one of each.
If you dont want to do that, the thing is bias, anyway, I doubt it would cause you any problems if you switched to different widths as needed.
Hmm trying to think it out. Maybe if you started with a longer length of fabric, the same as the WOF, you are going to use it all anyway, on your various projects.
cut the selvedges off your fabric. cut fabric in half diagonally.
now you have 2 "half squares" sew them together into a diamond, you know, the straight edges of the left one forms the left side of a "T", the right one forms an "L". sew the up & down edges together. The bias edges are to the left & right.
now bring the other straight edges together into a tube, offset it the amount you are cutting. So there's a leading "rabbit ear" and a trailing Rabbit ear, both the width you want to cut. you cut along the first bias edge, and end up at the trailing rabbit ear bias edge.
cut it on the width you want. The cut will spiral around the tube, on the bias. As big as this tube is, if you have a 12 or 18 inch mat, slide it into the tube & ruler cut it.
Since you are only using black, and you need a variety of widths, you could make one of each.
If you dont want to do that, the thing is bias, anyway, I doubt it would cause you any problems if you switched to different widths as needed.
05-19-2011, 04:28 PM
#17
Super Member
Join Date: Oct 2009
Location: Maryland
Posts: 4,449
Flying_V_Goddess
I don't mean to be insistent... but I keep looking at your picture here, and still knowing that what you have outlined in colors is black...I still see where you have options to start and stop at points by hiding under another bias. Are each of those pieces over 40"? How big are the blocks? or is this the whole quilt?
See on each side of her where you have it highlighted red... each side is independent ( can use it's own piece of bias to complete that portion.. ending where the highlighted part that goes around her head and face. I wish I could show you! lol or at least see it ! :)
I don't mean to be insistent... but I keep looking at your picture here, and still knowing that what you have outlined in colors is black...I still see where you have options to start and stop at points by hiding under another bias. Are each of those pieces over 40"? How big are the blocks? or is this the whole quilt?
See on each side of her where you have it highlighted red... each side is independent ( can use it's own piece of bias to complete that portion.. ending where the highlighted part that goes around her head and face. I wish I could show you! lol or at least see it ! :)
05-19-2011, 07:27 PM
#18
Super Member
Thread Starter
Join Date: Mar 2007
Location: Wisconsin
Posts: 1,703
Originally Posted by quiltmouse
somewhere I saw how you make a continuous bias strip out of 1 yd of fabric.
Hmm trying to think it out. Maybe if you started with a longer length of fabric, the same as the WOF, you are going to use it all anyway, on your various projects.
cut the selvedges off your fabric. cut fabric in half diagonally.
now you have 2 "half squares" sew them together into a diamond, you know, the straight edges of the left one forms the left side of a "T", the right one forms an "L". sew the up & down edges together. The bias edges are to the left & right.
now bring the other straight edges together into a tube, offset it the amount you are cutting. So there's a leading "rabbit ear" and a trailing Rabbit ear, both the width you want to cut. you cut along the first bias edge, and end up at the trailing rabbit ear bias edge.
cut it on the width you want. The cut will spiral around the tube, on the bias. As big as this tube is, if you have a 12 or 18 inch mat, slide it into the tube & ruler cut it.
Since you are only using black, and you need a variety of widths, you could make one of each.
If you dont want to do that, the thing is bias, anyway, I doubt it would cause you any problems if you switched to different widths as needed.
Hmm trying to think it out. Maybe if you started with a longer length of fabric, the same as the WOF, you are going to use it all anyway, on your various projects.
cut the selvedges off your fabric. cut fabric in half diagonally.
now you have 2 "half squares" sew them together into a diamond, you know, the straight edges of the left one forms the left side of a "T", the right one forms an "L". sew the up & down edges together. The bias edges are to the left & right.
now bring the other straight edges together into a tube, offset it the amount you are cutting. So there's a leading "rabbit ear" and a trailing Rabbit ear, both the width you want to cut. you cut along the first bias edge, and end up at the trailing rabbit ear bias edge.
cut it on the width you want. The cut will spiral around the tube, on the bias. As big as this tube is, if you have a 12 or 18 inch mat, slide it into the tube & ruler cut it.
Since you are only using black, and you need a variety of widths, you could make one of each.
If you dont want to do that, the thing is bias, anyway, I doubt it would cause you any problems if you switched to different widths as needed.
05-19-2011, 07:50 PM
#19
Super Member
Thread Starter
Join Date: Mar 2007
Location: Wisconsin
Posts: 1,703
Originally Posted by roseOfsharon
Flying_V_Goddess
I don't mean to be insistent... but I keep looking at your picture here, and still knowing that what you have outlined in colors is black...I still see where you have options to start and stop at points by hiding under another bias. Are each of those pieces over 40"? How big are the blocks? or is this the whole quilt?
See on each side of her where you have it highlighted red... each side is independent ( can use it's own piece of bias to complete that portion.. ending where the highlighted part that goes around her head and face. I wish I could show you! lol or at least see it ! :)
I don't mean to be insistent... but I keep looking at your picture here, and still knowing that what you have outlined in colors is black...I still see where you have options to start and stop at points by hiding under another bias. Are each of those pieces over 40"? How big are the blocks? or is this the whole quilt?
See on each side of her where you have it highlighted red... each side is independent ( can use it's own piece of bias to complete that portion.. ending where the highlighted part that goes around her head and face. I wish I could show you! lol or at least see it ! :)
[IMG]http://i132.photobucket.com/albums/q...s/SariaTWW.png[/IMG] [IMG]http://i132.photobucket.com/albums/q...DaruniaTWW.png[/IMG] [IMG]http://i132.photobucket.com/albums/q...ss/RutoTWW.png[/IMG]
(Saria, Darunia, Ruto)
[IMG]http://i132.photobucket.com/albums/q...ss/ImpaTWW.png[/IMG] [IMG]http://i132.photobucket.com/albums/q...NabooruTWW.png[/IMG] [IMG]http://i132.photobucket.com/albums/q...s/RauruTWW.png[/IMG]
(Impa, Nabooru, Rauru)
(don't have images loaded up for the other two)
I think I kind of get what you're trying to tell me with Ruto. Like how the fin starts at the top of her head and ends at the bottom of her elbow. Just one of her fins is 45", not both. I know that I can tuck one end of the leading underneath her head and the other underneath her elbow. I guess what I'm trying to say is its a long way between the start and stop and therefore needs a longer strip of bias. And I'm not sure if I can get that longer strip without piecing strips together...and I'm not sure if piecing together would be a good idea since the extra seams would create bulk and I see that as possibly being a problem because the tape is going to be so thin.
I'm trying to figure out what to do for her head, though, because there's really no definate start and stop. I think I could start in the corner of her head, work my way around until I get back to the starting point, and wrap the end underneath the starting point.
05-20-2011, 06:32 AM
#20
Super Member
Join Date: Mar 2011
Location: Pratt Kansas
Posts: 1,222
I do see that. If you use 40" of fabric, the diagonal length would be 56", with the straight edge seam staggering down through it. So there would be several pieces that are of significant length, 40" - 56". If that is not enough, you need to get 3-4 yards, do the diagonal cut. Fold the fabric with the diag as straight edge & rotary cut your precise width cuts. Every piece would be 56".
I do understand your OP question is about cutting so wide & trimming. I agree that is a lot of fabric waste.
:-D I come off as "too" helpful sometimes. Hope I did not offend. Your project is ambitious & it looks like you are having fun (isn't that the whole point) & I am confident they will be stunningly lovely!!!
As the strips are bias and it is a hanging, and thus will not be washed much. What about a straight cut on your bias strip, and just butt them? The cut will be bias also, so no raveling.
And the most recent question, about her head. There are several intersections with bolder lines, do your head transition there? The earrings, and that 3 triangle unit are bold.
I do understand your OP question is about cutting so wide & trimming. I agree that is a lot of fabric waste.
:-D I come off as "too" helpful sometimes. Hope I did not offend. Your project is ambitious & it looks like you are having fun (isn't that the whole point) & I am confident they will be stunningly lovely!!!
As the strips are bias and it is a hanging, and thus will not be washed much. What about a straight cut on your bias strip, and just butt them? The cut will be bias also, so no raveling.
And the most recent question, about her head. There are several intersections with bolder lines, do your head transition there? The earrings, and that 3 triangle unit are bold.
Thread
Thread Starter
Forum
Replies
Last Post
craftybear
Links and Resources
3
03-18-2011 03:26 PM
craftybear
Links and Resources
0
01-30-2011 09:14 PM
