Go Back  Quiltingboard Forums > Main
Pull up the bobbin thread? >

Pull up the bobbin thread?

Pull up the bobbin thread?

Thread Tools
 
Old 08-06-2010, 11:21 PM
  #1  
Member
Thread Starter
 
Marie R's Avatar
 
Join Date: Jul 2010
Location: Fort Jones, California
Posts: 40
Default

I am ready to start machine quilting on my first quilt. The book I have been reading says to pull up the bobbin thread so you don't get a "nest" on the bottom of your quilt. If I pull up the bobbin thread to the top how am a going to secure the first few stitches? Another book says to thread the top and bottom threads on a needle and sew them between layers! I am lost. Can anyone help me please.
Marie R is offline  
Old 08-06-2010, 11:46 PM
  #2  
Power Poster
 
Join Date: Oct 2009
Location: Idaho
Posts: 11,375
Default

I will try this again. I hope it makes sense I am beginning to get very sleepy.
Be sure you take one stitch down and up to bring the bobbin thread to the top. If you don't you will have a nest or what I call a big mess.
Securing threads:
One way is to take tiny tiny stitches at the beginning to secure the thread.
Another way is to begin stitching, then when you stop you will tie a very small knot close to the beginning of your quilting. Thread these on a needle and run the needle through the batting for 1 or 2 inches and back through the top and out. Tug the thread slightly until you hear a small pop. This will put the small knot into the batting. Carefully clip the thread and continue quilting.
At the end of the area that you are quilting you can secure your threads again in the same manner.
I am sure there are many ways to secure thread. These are just the two that I have used.
Sadiemae is offline  
Old 08-06-2010, 11:47 PM
  #3  
Super Member
 
kwiltkrazy's Avatar
 
Join Date: Apr 2010
Location: Mapleton, Oregon
Posts: 5,922
Default

I always pull up my bottom thread, then I take two or three small stitches which makes the stitches so they don't come out. I have never heard or putting the bottom thread through your needle, I would think it would make the line look thicker for a little ways, but it would lock your stitches in place. Oh, I think I know what you mean, when you are finished quilting, you take a regular needle NOt on the machine but a regular sewing needle and work the ends in between the back and top to hide the ends9like you when you are hand quilting) and give it a little more security from coming unquilted. Am I making any sense at all. Hope I have helped, and not just confused you any more than you were. Good luck. Just remember to relax, and try to enjoy it.
kwiltkrazy is offline  
Old 08-07-2010, 12:20 AM
  #4  
Power Poster
 
Lacelady's Avatar
 
Join Date: Apr 2009
Location: Ireland
Posts: 12,281
Default

Originally Posted by kwiltkrazy
I always pull up my bottom thread, then I take two or three small stitches which makes the stitches so they don't come out. I have never heard or putting the bottom thread through your needle, I would think it would make the line look thicker for a little ways, but it would lock your stitches in place. Oh, I think I know what you mean, when you are finished quilting, you take a regular needle NOt on the machine but a regular sewing needle and work the ends in between the back and top to hide the ends9like you when you are hand quilting) and give it a little more security from coming unquilted. Am I making any sense at all. Hope I have helped, and not just confused you any more than you were. Good luck. Just remember to relax, and try to enjoy it.
When I am darning in my ends, I use one of those self threading needles, it's much easier to use as you don't have to try and poke short ends of threads through the eye, you just hold the threads across the top of the needle and they snap into the eye. Only drawback is that you have to use a thimble to sew with this kind of needle, or it chews up your finger!
Lacelady is offline  
Old 08-07-2010, 01:28 AM
  #5  
Super Member
 
gale's Avatar
 
Join Date: Apr 2007
Location: North-Central Indiana
Posts: 4,909
Default

Pulling up the bobbin thread confused me until I tried it myself. Like the PP said, put the needle down and then up again. Then you raise up the presser foot and just tug gently on the thread (top thread) until the little loop of the bottom thread comes up, then pull up that bottom thread (I use the non-sharp side of my seam ripper or you can use one of those stiletto things. Then you have both threads on top. Hold onto those and put the fabric back under the presser foot and then put the presser foot back down and sew as directed above-either taking tiny stitches at the beginning and end or using a regular sewing needles to draw the threads between the layers of fabric.
gale is offline  
Old 08-07-2010, 01:30 AM
  #6  
Super Member
 
gale's Avatar
 
Join Date: Apr 2007
Location: North-Central Indiana
Posts: 4,909
Default

Oh btw-I do not pull up the bottom thread if I'm starting at the edge where it will be covered with the binding. I try to quilt this way (edge to edge) to avoid having to do that but if you're starting in the middle part of the quilt, that's when you need to pull it up.
gale is offline  
Old 08-07-2010, 03:42 AM
  #7  
Super Member
 
katier825's Avatar
 
Join Date: Mar 2009
Location: FL
Posts: 7,084
Default

Originally Posted by gale
Pulling up the bobbin thread confused me until I tried it myself. Like the PP said, put the needle down and then up again. Then you raise up the presser foot and just tug gently on the thread (top thread) until the little loop of the bottom thread comes up, then pull up that bottom thread (I use the non-sharp side of my seam ripper or you can use one of those stiletto things. Then you have both threads on top. Hold onto those and put the fabric back under the presser foot and then put the presser foot back down and sew as directed above-either taking tiny stitches at the beginning and end or using a regular sewing needles to draw the threads between the layers of fabric.
Excellent way to describe it! It took me a while to get it myself - even after taking a class. I still can't do the same at the end. ;0
katier825 is offline  
Old 08-07-2010, 04:39 AM
  #8  
Super Member
 
quiltinghere's Avatar
 
Join Date: Mar 2010
Location: PROFESSIONAL Longarm Quilter NW Indiana
Posts: 3,400
Default

"I still can't do the same at the end"

I don't think you pull up the bottom at the end of a fun...Do you? At the end, I just take a few tiny stitches to lock it in.

I could very well be wrong...:(
quiltinghere is offline  
Old 08-07-2010, 05:38 AM
  #9  
Senior Member
 
mlaceruby's Avatar
 
Join Date: Jun 2010
Location: Somerset PA
Posts: 719
Default

try this youtube video
explains and shows
http://www.youtube.com/watch?v=KDERq4I7l-Q
mlaceruby is offline  
Old 08-07-2010, 07:20 AM
  #10  
Junior Member
 
BABAREEBA's Avatar
 
Join Date: Apr 2010
Location: PINELLAS PARK, FLORIDA
Posts: 262
Default

Again I have learned something I couldn't figure out. Thank you Marie R for asking the question, thank you Gale for the description and thank you Michelle for the link to the video. So simple, but it this going to save me problems. Just love this place
BABAREEBA is offline  
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
sewannie
Main
15
03-13-2017 10:19 AM
Mitty
Main
7
03-01-2016 11:48 AM
josieh
Main
25
05-21-2015 05:58 PM
MissJMac
Main
7
06-15-2011 08:58 AM
BrendaK
Main
54
01-27-2011 10:35 PM

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Trackbacks are Off
Pingbacks are Off
Refbacks are Off



FREE Quilting Newsletter