Straight-line machine quilting technique
#11
Super Member
Join Date: May 2010
Location: Ontario, Canada
Posts: 1,779
When quilting, burying the knot and thread does take a bit of time but the results are seamless lines that will enhance the overall effect. When I first tried thread painting it seemed like I was forever tying knots and burying them & LOL! I was!! and yes it took time! but the overall end result was good and I'm glad I did it.
#15
Hi. I posted the English paper pieced quilt. The straight line quilting only went to the applicaied flower. I pulled up the bottom thread when starting by never buried any threads. I backed takes by 2 stitches when starting and stopping. I FMQ the flowers and leaves. I didn't find it too bad as I did a little bit each night for about a week until it was done. I must add that I trialed the following: I used crayons washable markers and drew lines on the white fabric! I used yellow marker. I also glued basted the quilt using elders school house glue. I was afraid to wash it fearing the marker would not come and that the red would run but I did use those color catchers when washing, it cam out great not trace of marker or glue. I will definitely use both techniques agin.
#16
I pull the top thread through to the back, tie it with the bobbin thread and bury both threads. I keep a large eye needle handy to do this. I like the look of it better than tiny stitches or back stitching plus I like hand work so I don't see it as a chore. Often times it is a nice break from the machine stitching.
#17
Senior Member
Join Date: May 2010
Location: SW, MI
Posts: 827
I plan to do cross-hatch background on some squares that will have applique. After looking closely, why not do the cross-hatching FIRST - then applique over the top. This would eliminate the starting and stopping, burying the knots and almost make a grid for the applique placement. What problems am I overlooking doing it this way?
#18
I plan to do cross-hatch background on some squares that will have applique. After looking closely, why not do the cross-hatching FIRST - then applique over the top. This would eliminate the starting and stopping, burying the knots and almost make a grid for the applique placement. What problems am I overlooking doing it this way?
#19
Senior Member
Thread Starter
Join Date: Sep 2011
Location: Texas
Posts: 451
Thanks everyone for all your responses. This has puzzled me for a long time. I think one could do the cross hatching first if you traced where applique will go and then stitch just a few stitches beyond that mark. Sewlo, your method of back-stitching 2 stitches when you stop works very well for you. I looked closely at your english pieced quilt and could NOT see any back-stitching! I'm not sure I'd have that same great result. This is just one reason 90% of all my quilts get meandered. I like matching thread to each color vs having white thread crossing red or vs. versa.
#20
Power Poster
Join Date: Feb 2011
Location: Lowell, MA
Posts: 14,083
Over the years and with several quilting classes under my belt, I've learned that if you decrease the stitch length shortly before having to stop the cross-hatching that should be enough. Many times I just stitch in place for a little bit and I haven't had any problems that I'm aware of. You could also back stitch when you need to stop or move the stitching line. If the space isn't too large, I would stitch several times in the same place, then raise the presser move, move it over the applique and begin quilting, again stitching several times in place. I'm sure there are other opinions on how to do this, this is how I do it.
Thread
Thread Starter
Forum
Replies
Last Post
craftybear
Links and Resources
2
05-13-2011 08:50 AM