March/April Table runner/Table mat Swap!!!!
03-16-2014, 09:32 AM
#43
Senior Member
Join Date: Oct 2013
Location: Sweetwater,Tennessee
Posts: 772
Originally Posted by ljdugas31
Bee Beatty I found the line of fabric on Missouri Star some diff than you have.Might want to check it out. They ship fast and just charge $5. shipping no matter what you spend. Love that sight.
03-16-2014, 12:24 PM
#44
Super Member
Join Date: May 2012
Location: Green Valley, AZ
Posts: 1,218
Here's some sneak peeks at what I'm working on for Oksewnsew. I'm actually done with my top already, but don't want to spoil the surprise. I'll get around to machine quilting it next weekend!
[ATTACH=CONFIG]467535[/ATTACH]
[ATTACH=CONFIG]467536[/ATTACH]
[ATTACH=CONFIG]467535[/ATTACH]
[ATTACH=CONFIG]467536[/ATTACH]
03-16-2014, 04:23 PM
#45
Super Member
Join Date: Mar 2010
Location: Massachusettes
Posts: 2,507
Originally Posted by Bee Beatty
LJ...thanks! I just visited the site and found two fabrics in the Summer Breeze II line that I really like!...and for less than I paid on sale locally! Ordering
03-16-2014, 07:00 PM
#46
Senior Member
Join Date: Oct 2013
Location: Sweetwater,Tennessee
Posts: 772
Originally Posted by MizMelly
Here's some sneak peeks at what I'm working on for Oksewnsew. I'm actually done with my top already, but don't want to spoil the surprise. I'll get around to machine quilting it next weekend!
[ATTACH=CONFIG]467535[/ATTACH]
[ATTACH=CONFIG]467536[/ATTACH]
[ATTACH=CONFIG]467535[/ATTACH]
[ATTACH=CONFIG]467536[/ATTACH]
03-18-2014, 01:38 PM
#47
Senior Member
Join Date: Oct 2013
Location: Sweetwater,Tennessee
Posts: 772
Peek-A-Boo Photo for Annt59
Peek-A-Boo for Annt59,
This is the center Dresden for the runner. It is 19 1/2 inches across the widest point. I cut 9 inch strips of each fabric to make 9 inch blades...there are 21 blades. Since this is my first table runner...it seems this runner will need to be at least 28 inches wide and 66 inches long. I am thinking of making the 2 other plates using 7 inch strips..so they are smaller. As for the center....I usually keep them small....3 inch diameter max.
What say you fellow swappers???? This will be the only progress photo until its finished.
Bee
This is the center Dresden for the runner. It is 19 1/2 inches across the widest point. I cut 9 inch strips of each fabric to make 9 inch blades...there are 21 blades. Since this is my first table runner...it seems this runner will need to be at least 28 inches wide and 66 inches long. I am thinking of making the 2 other plates using 7 inch strips..so they are smaller. As for the center....I usually keep them small....3 inch diameter max.
What say you fellow swappers???? This will be the only progress photo until its finished.
Bee
03-18-2014, 02:10 PM
#49
Senior Member
Join Date: Oct 2013
Location: Sweetwater,Tennessee
Posts: 772
Originally Posted by MizMelly
It's gorgeous! I love Dresden plate blocks!!
. On this one....I went a little overboard wanting to showcase the fabric and made it a little big for a runner....and.....this is the first table runner I have ever made! Time to get creative!
Bee
03-19-2014, 12:51 AM
#50
Super Member
Join Date: Jan 2010
Location: Kissimmee, FL
Posts: 1,413
Originally Posted by Bee Beatty
Peek-A-Boo for Annt59,
This is the center Dresden for the runner. It is 19 1/2 inches across the widest point. I cut 9 inch strips of each fabric to make 9 inch blades...there are 21 blades. Since this is my first table runner...it seems this runner will need to be at least 28 inches wide and 66 inches long. I am thinking of making the 2 other plates using 7 inch strips..so they are smaller. As for the center....I usually keep them small....3 inch diameter max.
What say you fellow swappers???? This will be the only progress photo until its finished.
Bee
This is the center Dresden for the runner. It is 19 1/2 inches across the widest point. I cut 9 inch strips of each fabric to make 9 inch blades...there are 21 blades. Since this is my first table runner...it seems this runner will need to be at least 28 inches wide and 66 inches long. I am thinking of making the 2 other plates using 7 inch strips..so they are smaller. As for the center....I usually keep them small....3 inch diameter max.
What say you fellow swappers???? This will be the only progress photo until its finished.
Bee
Thread
Thread Starter
Forum
Replies
Last Post
owlvamp
Member Swaps and Round/Row Robins
85
06-20-2016 07:35 PM
lauriejo
Member Swaps and Round/Row Robins
477
05-01-2014 02:12 PM
Elisabrat
Member Swaps and Round/Row Robins
140
04-28-2014 05:34 PM
Elisabrat
Member Swaps and Round/Row Robins
745
08-01-2013 03:26 AM
Rhonda
Member Swaps and Round/Row Robins
43
05-15-2013 08:29 PM
