Machine appliqué using straight stitches
#11
Senior Member
Join Date: Nov 2012
Posts: 338
I use a blanket stitch to machine applique and it doesn't fray. Heres a link.
http://www.youtube.com/watch?v=mTYtBtprJ2M
http://www.youtube.com/watch?v=mTYtBtprJ2M
#13
you can use a fusible product that is one to be sewn through after applying to fabric. or you can do your applique pieces like Eleanor Burns of Quilt In A Day, use light weight fusible, draw applique item on smooth side, place on right side of fabric, sew on line. Clip opening if necessary to turn. turn and finger press. then lay onto quilt backing and press with iron. done. then blanket stitch by machine or straight stitch. no raw edges. i usually do SunBonnet Sues that way. good luck
#14
Super Member
Join Date: Jun 2011
Location: Illinois
Posts: 9,018
you can use a fusible product that is one to be sewn through after applying to fabric. or you can do your applique pieces like Eleanor Burns of Quilt In A Day, use light weight fusible, draw applique item on smooth side, place on right side of fabric, sew on line. Clip opening if necessary to turn. turn and finger press. then lay onto quilt backing and press with iron. done. then blanket stitch by machine or straight stitch. no raw edges. i usually do SunBonnet Sues that way. good luck
#15
Senior Member
Join Date: Jul 2011
Posts: 433
When my daughter was young my machine only did a straight stitch. I loved to make her summer dresses with appliques. I would iron fusible interfacing on the fabric before cutting out the applique then stitch close to the edge with a small stitch. After many washing the applique didn't ravel.
#16
Senior Member
Join Date: Oct 2011
Location: Jacksonville, FL
Posts: 374
With all the good info and suggestions you've gotten from the first people to respond to your query, also consider using some of the other (beyond buttonhole, zig zag, etc.) stitches that you might have on your sewing machine.
Pat
Pat
#17
thanks for this link.... I never used my mirror image stitch on my Bernia.....wow.... always a new hint to improve speed and I love that she straight stitches between pieces.... I have just started doing that a bit.....
I use a blanket stitch to machine applique and it doesn't fray. Heres a link.
http://www.youtube.com/watch?v=mTYtBtprJ2M
http://www.youtube.com/watch?v=mTYtBtprJ2M
#18
Member
Join Date: Aug 2010
Posts: 91
I bet if you will try the "blanket" stitch, you will like it for applique. It is not hard to master...if I can--YOU can. Just take it slow around curves. Stop every few stitches and pivot your fabric. I've been doing it for a while now and I like it. I try to match the thread to the fabric--I like that better than using one color, like black. Give it a try! :0)
#19
Super Member
Join Date: Aug 2010
Location: North Central, NC
Posts: 2,741
I am wondering how you did the McKenna Ryan quilt by this method. I have done a couple of her designs and often there are a lot of pieces with sharp points which are also sometimes very thin strips such as pine trees. How did you turn these kinds of pieces right side out after sewing the fusible to them?
#20
I am wondering how you did the McKenna Ryan quilt by this method. I have done a couple of her designs and often there are a lot of pieces with sharp points which are also sometimes very thin strips such as pine trees. How did you turn these kinds of pieces right side out after sewing the fusible to them?
Thread
Thread Starter
Forum
Replies
Last Post
bearisgray
Main
25
07-21-2019 03:19 PM
AngelinaMaria
Main
22
08-03-2014 05:20 PM