Go Back  Quiltingboard Forums >
  • Main
  • Sewing chair >
  • Sewing chair

  • Sewing chair

    Thread Tools
     
    Old 03-02-2015, 05:09 PM
      #1  
    Senior Member
    Thread Starter
     
    SharonTheriault's Avatar
     
    Join Date: Aug 2010
    Location: Jackson, Georgia
    Posts: 611
    Default Sewing chair

    I'm looking for another sewing room chair. Adjustable and comfortable and not expensive. What do you recommend?
    SharonTheriault is offline  
    Old 03-02-2015, 05:33 PM
      #2  
    Member
     
    Join Date: Feb 2014
    Posts: 19
    Default

    I bought an office chair at Staples and it adjusts up and down and works great at my machine. Plus it is comfy
    estrogen is offline  
    Old 03-02-2015, 05:40 PM
      #3  
    Super Member
     
    Join Date: Feb 2013
    Location: Rapid City, SD
    Posts: 4,961
    Default

    My sewing center carries nice chairs -- they have rollers, and adjustable backs. It is very comfortable. My cats love it too!
    Nammie to 7 is offline  
    Old 03-02-2015, 05:57 PM
      #4  
    Power Poster
     
    Join Date: Nov 2009
    Location: Mableton, GA
    Posts: 11,224
    Default

    E http://www.quiltingboard.com/main-f1...s-t258905.html

    we just had a discussion recently. I did try out the bungee chair in The Container Store. I don't need a new chair but if I did I would get that one.
    Stitchnripper is offline  
    Old 03-03-2015, 05:55 AM
      #5  
    Super Member
     
    Join Date: Aug 2013
    Location: Florida
    Posts: 5,919
    Default

    I recommend an office chair also. Go to Office Depot or similar place and test them out. Be sure to sit forward and not back. I have one that has a tilting back and tilting seat that "fix independently" with levers on the bottom. Love it when my back get tired. So many people test chairs like they are in a recliner. Don't do that. Sit forward and pretend to sew.
    toverly is offline  
    Old 03-03-2015, 06:06 AM
      #6  
    Power Poster
     
    Join Date: Jan 2011
    Location: Southern USA
    Posts: 16,063
    Default

    I took the back off an office chair and love the rolling swivel stool it became. Like the stool in the Dr. office exam room.
    Onebyone is offline  
    Old 03-03-2015, 06:30 AM
      #7  
    Super Member
     
    Join Date: Aug 2007
    Location: Clay Springs AZ
    Posts: 3,229
    Default

    Bought mine at Walmart. Don't do it. Worst chair ever. Only paid twenty dollars for it but not even worth that.
    Pushes against your back and cant adjust it any further.
    Rose Marie is offline  
    Old 03-03-2015, 06:32 AM
      #8  
    Member
     
    Join Date: Jan 2012
    Posts: 91
    Default

    I use the same office chair I do at work but with the arms removed. It is an Office Depot Quantum model that is mesh in the seat and back. My main reason for buying it is the seat length is actually adjustable! After spinal fusion surgery a few years ago I found typical chairs were too long in the seat for me (I have short legs) to be anywhere near comfortable. The back moves forward on this chair making the seat length 'shorter'. It also adjusts about 5 other ways to get the perfect comfort level. It is a little on the expensive side (for me) at around $250 but sometimes OD runs really good sales. The only time it gets uncomfortable is after about 7 straight hours at my work desk but that could be work stress related
    auntnana is offline  
    Old 03-03-2015, 06:48 AM
      #9  
    Super Member
     
    Join Date: Jun 2012
    Location: Sonoma County, CA
    Posts: 4,299
    Default

    I have a tendency to hunch my shoulders up while I sew, which gives me a lot of back & shoulder pain and cuts my sewing sessions short, so I've been trying different seats to see if that would help.

    I bought one of those saddle-seat stools where you sort of straddle the stool. The seat is tilted forward a bit and so it forces me to lean back a bit, which helps keep my shoulders down and my back straight. It feels GREAT on my back but unfortunately presses uncomfortably on the hip socket I had replaced a few years back, so I couldn't stick with it. (Now it's my DH's stool for playing drums on our Rock Band game, LOL)

    Now I have a balance ball and I sure wish I'd bought this first! (Cost me about $25, as opposed to about $200 for the saddle stool.) The one I bought is a tiny bit too low for my sewing station but I want to use it a little longer before I buy a second, larger one (and they do come in various sizes so I can get the next size up no problem). It's surprisingly comfortable to sit on, and it also forces me to sit with my shoulders back to keep my balance, so I can sew longer with less shoulder fatigue. I do sort of miss having a back rest because I was in the habit of leaning back on it while lining up fabrics in my hands, but I think I needed to lean back just because I was sore. I'm not sore now but the habit is still there and I've about tipped myself off backwards a couple times because of it, LOL. It's kind of fun to sit on, I catch myself absent-mindedly bouncing myself up and down on it if I pause in my sewing to think a bit, which is a good thing, every little bit of exercise helps and I think the extra movement helps keep me from getting stiff and sore. I catch myself starting to slouch all the time; the ball just doesn't allow that to happen without messing up my balance and forcing me to pay attention to and correct how I'm sitting.

    I haven't done any "marathon" sewing sessions since I got it - I want to spend a couple long days on it and see how I feel. If it works as well as it seems it will, I'll buy one the next size up for my sewing station and move the one I have upstairs to be my office "chair" for my computer & drawing desk.

    I should probably mention I'm rather heavy, so I bought a ball that's rated for 2,000 lbs!! I don't weigh nearly THAT much, and that way I can plop down on it and bounce around on it fearlessly. And if I ever decide to actually exercise with it, I can do that too without any worries about popping it. It came deflated, with a foot-pump that is designed to prevent over-inflation; I haven't had to add more air since I first inflated it. I've had it about a month so far.

    Plus it rolls right under my sewing table - takes up far less room than my chair does, which is another benefit.
    Sewnoma is offline  
    Old 03-03-2015, 07:34 AM
      #10  
    Senior Member
     
    Join Date: Jan 2015
    Location: Southwest
    Posts: 736
    Default

    I've seen some pictures of folks' sewing room organization and was wondering what that "disc" is. It is blue and looks like it sets upon a chair seat.....kind of like a half ball........what is it called and how do you like it? I've seen the exercise balls and this kind of sounds like it does the same thing.......which do you like?

    I tend to raise my shoulders when I sew....so you know at the end of the day, I feel like I need someone to press down on my shoulder blades ....have you seen this device that you wear (it has a weight around the lower back)........does anyone use it and does it seem to help? I don't want to end up "stooped"...but between sewing and the computer...it seems like I always have my shoulders "up"! Thanks -- Nora
    NoraB is offline  
    Related Topics
    Thread
    Thread Starter
    Forum
    Replies
    Last Post
    Onebyone
    Links and Resources
    9
    12-06-2016 07:15 AM
    gale
    Mission: Organization
    30
    11-03-2014 01:43 AM
    craftybear
    Links and Resources
    4
    09-02-2011 01:30 AM
    scrappy happy
    Main
    175
    04-29-2011 10:07 AM
    shellyp
    Main
    24
    09-27-2008 11:04 AM

    Posting Rules
    You may not post new threads
    You may not post replies
    You may not post attachments
    You may not edit your posts

    BB code is On
    Smilies are On
    [IMG] code is On
    HTML code is On
    Trackbacks are Off
    Pingbacks are Off
    Refbacks are Off



    FREE Quilting Newsletter