Older cabinets and ergonomics
#1
Member
Thread Starter
Join Date: Oct 2018
Posts: 4
Older cabinets and ergonomics
Hi,
I love the vintage Singer sewing machine cabinets but I've heard that they are uncomfortable to sew at because you can't sit in front of the needle. Have you had any issues with this. Are certain cabinets better than others? This is the cabinet that I'm thinking about.
[ATTACH=CONFIG]603998[/ATTACH]
Thanks,
Juli
I love the vintage Singer sewing machine cabinets but I've heard that they are uncomfortable to sew at because you can't sit in front of the needle. Have you had any issues with this. Are certain cabinets better than others? This is the cabinet that I'm thinking about.
[ATTACH=CONFIG]603998[/ATTACH]
Thanks,
Juli
#3
Super Member
Join Date: Mar 2016
Posts: 2,828
I have a problem with most Singer cabinets. I like to sit right in front of the needle and most Singer cabinets do not allow that. I end up straddling the left leg of the cabinet. The one you chose would be the worst, in my opinion. With the drawers on the left, you would have a hard time straddling the leg. I learned to sew on a 15-91 in a 65 cabinet. The drawers are all on the right side and the left side has a cut out that makes sitting in front of the needle easy.
I'm currently using a cabinet that came with a touch and sew installed, so I don't think it would work with the older straight stitchers. It works well with all the slant shank machines, though. It's not shown with the other cabinet models on Ismacs. it has a three digit number. (I once had the tag that came with it, but can't remember where I put it.) The hole for the machine is moved to the right so that you sit right in front of the needle. The drawers are on the left side. It actually looks like a desk. It's not pretty, but it works really well.
Found a photo!
bkay
I'm currently using a cabinet that came with a touch and sew installed, so I don't think it would work with the older straight stitchers. It works well with all the slant shank machines, though. It's not shown with the other cabinet models on Ismacs. it has a three digit number. (I once had the tag that came with it, but can't remember where I put it.) The hole for the machine is moved to the right so that you sit right in front of the needle. The drawers are on the left side. It actually looks like a desk. It's not pretty, but it works really well.
Found a photo!
bkay
#5
Super Member
Join Date: Sep 2015
Posts: 1,963
Cabinets and preferances are very individual. I would say, if you aren't particularly tall most of them should be fine. I have a 201K in a treadle table. It's converted to electric, and the treadle irons aren't there anymore. I have tried two types of foldaway tables and a cabinet more like a cupboard, I would say the ergometics are as near optimal as can be. Hands go on boths side of the needle with out any cumbersome bends or angles. Advantage with new horn cabinets is mostly storage space, optinal build on modules etc, at least some models. Some of the older cabinets had quite good storage space though. Unless it turns into a 8 hours a day, 5 days a week chore, the old cabinets are quite good. Some are smaller, some are a bit larger. I think some of the later teak or mahogany tables are taller legs.
My table is very simple, similar to this one.
My table is very simple, similar to this one.
Last edited by Mickey2; 11-14-2018 at 12:32 PM.
#6
Member
Join Date: Aug 2018
Posts: 23
"If you aren't particularly tall.."
Wise words. At 6'5" I find every table and counter too short for me. Lining up with the needle isn't as hard as bending over to do the work. But it did help me acquire a nice wife who was looking for a tall guy. (She's 5'9"+)
Wise words. At 6'5" I find every table and counter too short for me. Lining up with the needle isn't as hard as bending over to do the work. But it did help me acquire a nice wife who was looking for a tall guy. (She's 5'9"+)
#9
Banned
Join Date: Aug 2014
Location: Victorian Sweatshop Forum
Posts: 4,096
Cari
Thread
Thread Starter
Forum
Replies
Last Post