Singer 414G Mystery Bobbin Winder
02-11-2014, 04:55 PM
#1
Junior Member
Thread Starter
Join Date: Feb 2014
Posts: 202
Singer 414G Mystery Bobbin Winder
I'm hoping someone has one of these. When the latch type thing on the right of the machine is pulled out, the bobbin winder tire is supposed to butt against the wheel. I suspect the culprit is the spring with the hook on the end. Logic tells me that the hook should hook to something, but I don't know what. For all I know, a part is missing.
02-11-2014, 07:13 PM
#2
Super Member
Join Date: Mar 2013
Location: Brisbane, Australia
Posts: 1,850
Originally Posted by 19cats
I'm hoping someone has one of these. When the latch type thing on the right of the machine is pulled out, the bobbin winder tire is supposed to butt against the wheel. I suspect the culprit is the spring with the hook on the end. Logic tells me that the hook should hook to something, but I don't know what. For all I know, a part is missing.
[ATTACH=CONFIG]461851[/ATTACH]
Looks like you might just need to put the screw put back in with the spring in place.
02-16-2014, 04:49 AM
#3
Junior Member
Thread Starter
Join Date: Feb 2014
Posts: 202
Mike,
Thanks for the clear photograph. Unfortunately, it confirms what I suspected. Someone has "fixed" this with a shorter wire. There is no way I can hook my spring where yours is. On to the creation of a new spring.
Thanks for the clear photograph. Unfortunately, it confirms what I suspected. Someone has "fixed" this with a shorter wire. There is no way I can hook my spring where yours is. On to the creation of a new spring.
Thread
Thread Starter
Forum
Replies
Last Post
sews
For Vintage & Antique Machine Enthusiasts
25
03-27-2023 08:35 AM
BirdyFeathers
For Vintage & Antique Machine Enthusiasts
3
06-02-2013 07:13 PM
Oreomarie
For Vintage & Antique Machine Enthusiasts
1
03-26-2013 04:05 PM
sewbizgirl
For Vintage & Antique Machine Enthusiasts
12
02-19-2013 07:12 PM
