Go Back  Quiltingboard Forums > Main
Questions on Machine Quilting the first time >

Questions on Machine Quilting the first time

Questions on Machine Quilting the first time

Thread Tools
 
Old 10-22-2016, 01:58 PM
  #1  
Super Member
Thread Starter
 
Join Date: Mar 2016
Posts: 2,822
Default Questions on Machine Quilting the first time

I pieced an I spy quilt with 5" squares. I don't want the quilting to show much, so I can't take it the long armer. I'm relatively new to quilting, so I'm hesitant about my plan. I plan on spray basting and using warm and natural cotton batting which says you can be 10" between seams. I bought a walking foot for my vintage slant needle Rocketeer. I plan to stitch in the ditch with disappearing thread. (I still haven't figured out what disappearing thread is.) The reason for the disappearing thread is that the front is very light and the back is very dark.

The quilt is for a 2 year old and is intended to be a play quilt.

Are there any gaping holes in my plan?

bkay

The top:
Attached Thumbnails dsc_0501.jpg  
bkay is offline  
Old 10-22-2016, 02:04 PM
  #2  
Super Member
 
Join Date: Dec 2010
Location: Chula Vista CA
Posts: 7,340
Default

I have never used the monofilament thread, the last I knew it was like a very fine fishing line. I would use a 50 weight white thread on top and a dark three to match the back in the bobbin. I have started using "bobbin" thread in the bobbin, and it seems to blend in better than the standard quilting thread.
quiltingcandy is offline  
Old 10-22-2016, 02:08 PM
  #3  
Power Poster
 
Join Date: Mar 2011
Location: Ontario, Canada
Posts: 41,461
Default

Cute top! Invisible thread can be tricky to work with. I might choose white thread to match the sashing and white in the bobbin. Yes the thread will show on the back but nice white grid marks can look nice unless the back is a picture that you don't want to stitch through it.
Tartan is offline  
Old 10-22-2016, 02:20 PM
  #4  
Super Member
Thread Starter
 
Join Date: Mar 2016
Posts: 2,822
Default

The back is kind of like a navy blue "blender". It's not solid, but reads that way. It matches the dark corner squares.

bkay
bkay is offline  
Old 10-22-2016, 02:25 PM
  #5  
Senior Member
 
Join Date: Apr 2010
Location: Sunny Arizona
Posts: 476
Default

I might worry that the invisible thread would "poke" the child if there are any ends at all on the quilt top. Why not talk to your long-armer about using a thinner thread on the top so that it "sinks" in to the quilt. Ann
krafty14 is offline  
Old 10-22-2016, 02:44 PM
  #6  
Super Member
 
Join Date: Jul 2013
Location: Houston, TX
Posts: 9,510
Default

Invisible thread can be tricky to work with but doable. I find that one my Bernina, I have to drop the top tension WAY down so it doesn't break. I haven't worked with invisible thread on my Rocketeer so I don't know what it does. You could use white thread in the top and darker in the bobbin. The white probably wouldn't show much.
cashs_mom is offline  
Old 10-22-2016, 02:55 PM
  #7  
Super Member
 
Join Date: Jul 2010
Location: Western North Carolina
Posts: 1,432
Default

Monofilament thread is not recommended for children. Besides, it its washed much the thread will disintegrate. I know this from experience!
M.Elizabeth is offline  
Old 10-22-2016, 03:47 PM
  #8  
Power Poster
 
Join Date: Dec 2008
Location: Western Wisconsin
Posts: 12,930
Default

I have successfully quilted with YLI nylon monofilament thread. If you are using a walking foot, the stitching will be safe for children. The safety issue comes in only if you have big "toe catcher" stitches (which are more common in FMQ by beginners, not really an issue with experienced FMQers). It holds up just fine over time. It *can* deteriorate if exposed to a lot of sunlight for long periods of time (years), becoming yellow and brittle; however, with normal use it can easily last 20 years.

Some people prefer polyester monofilament thread, such as Superior sells. This thread does not turn yellow or break down over time, so you might want to use that instead of nylon monofilament. I prefer nylon monofilament for invisible machine applique because it is less noticeable; however, if I were quilting I would probably choose Superior's polyester monofilament thread. Also, polyester monofilament is less stretchy than nylon so it requires fewer adjustments to tension than nylon does.

For nylon monofilament, you want to reduce the upper tension considerably. This is to compensate for the stretch in the thread. It is also important with nylon monofilament to underfill the bobbins; for a metal bobbin, fill only about 3/4ths full. Those are the two major adjustments I make for nylon monofilament. Polyester monofilament is similar, but you would probably need to loosen the upper tension somewhat less.

Whether using nylon or polyester monofilament, brand is important. The only ones I recommend are YLI for nylon and Superior for polyester. Neither of these threads is "pokey". The nylon is as fine as baby hair (which is where the risk comes in for baby quilts if the thread gets wound around a toe or finger). Polyester is just slightly thicker and a little more milky in color, whereas nylon is clear (or smokey).

If you are wary of monofilament, then I would suggest going with Superior's "Bottom Line" in silver. This is a very fine thread, and the silver blends in with everything. Here is a link to it:
http://www.superiorthreads.com/shop/...om+line+silver
Prism99 is offline  
Old 10-22-2016, 03:53 PM
  #9  
Power Poster
 
Join Date: Dec 2010
Location: Michigan
Posts: 11,276
Default

If you have never quilted a quilt before, I would go with cotton thread. A new technique is hard enough to master without additional complications. For a child's quilt, I wouldn't worry too much about the color of thread on the backing.
PaperPrincess is offline  
Old 10-22-2016, 04:22 PM
  #10  
Super Member
 
Join Date: Jul 2014
Location: Illinois
Posts: 2,140
Default

The batting will hold up, but quilting 10" apart will put a ton of stress on the thread & fabric for a utility quilt. Children's quilts generally should be quilted 2" or LESS apart to provide enough sturdiness for regular washing & heavy use. 10" apart with cotton thread will last generally for about 2 years if laundered regularly before issues with the thread or fabric can start to crop up; because mono doesn't swell like cotton thread, as the needle holes start to wear, mono thread will not fill that space in like cotton. Cotton thread is easier to work with for new beginners than mono & will hold up a bit better in the wash.
I would pick a 50wt/ 2ply (or 60/3) cotton thread that matches the top & not worry about the back. 50/2 is very thin & really will not show up. Working with a Walking Foot is pretty easy to learn; it's not like learning to FMQ. If you still really want to use mono, I'd do mono only on the top & a matching 50/2 cotton in the bobbin.
Once you've done a couple of pieces with cotton thread, I do believe there are some rare instances where mono is the best choice. That said, after seeing for over 20 years, I STID'ed my first quilt, using mono because I thought that was the best choice for newbies. It was a nightmare to work with & after maybe a dozen or so trips through the wash, the stitches started snapping in probably 8 places & I've had to re-quilt the whole table runner. That is not a flaw of mono thread -- it's a problem that happens when inexperienced quilters try to work with one of THE most finicky threads out there without making the many accommodations needed to successfully quilt with mono.
Bree123 is offline  
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
IBQUILTIN
General Chit-Chat (non-quilting talk)
10
07-10-2015 09:59 AM
Future Quilter
Pictures
129
02-25-2012 08:06 AM
Angelmerritt
Pictures
69
12-18-2010 12:32 PM

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Trackbacks are Off
Pingbacks are Off
Refbacks are Off



FREE Quilting Newsletter