Featherweight Question
#21
Super Member
Join Date: Dec 2010
Location: Chula Vista CA
Posts: 7,402
In order to let you know if that is a good price, is to know the condition. Is there a case? Are there any attachments? It sounds like a very good price in CA if it is in good condition and it runs. But if there is a lot of work needed - don't other.
#22
Super Member
Join Date: Jun 2011
Location: Illinois
Posts: 9,018
I just bought a FW (my first, and will be my only) from a sewing center that is closing shop.......it has a lot of feet, and three bobbins and carrying case and I paid $200. I think that was a good deal. It works, I tried it when I came home, but the stitches are a bit tight...I am seeing pokies of the bobbin thread on the top....and the top thread seems to be a bit too tight. I tried adjusting the top tension to a lower number, down to 2, still pokies and top thread tight...any other suggestions? It took me about three times of threading it and having the thread break instead of make a stitch before I thought to try threading needle from right to left and that made the difference......one thing it did not have-a manual-is there a source for one
#23
It works, I tried it when I came home, but the stitches are a bit tight...I am seeing pokies of the bobbin thread on the top....and the top thread seems to be a bit too tight. I tried adjusting the top tension to a lower number, down to 2, still pokies and top thread tight...any other suggestions? It took me about three times of threading it and having the thread break instead of make a stitch before I thought to try threading needle from right to left and that made the difference......one thing it did not have-a manual-is there a source for one
I use a 1oz weight, tie it to the bobbin thread and hang it from the bobbin in the bobbin case. The thread should be -just- ready to come out of the bobbin case when you turn the case vertical. If that's where it's set to, someone disassembled the top tension and didn't set it right. There are instructions in the manual for that.
The manual can be found here:
http://ismacs.net/free-sewing-machine-manuals-list.html
There are 12 of them to pick from.
#24
$250 is not a great price for an average FW I mean one that has seen normal use. I have 4 or 5 and have paid from $25 up to too many $$. Make sure it has the bobbin case, I bought a 301 once with out the bobbin case and a bobbin case cost more than I gave for the machine.
#25
Mine cost $350 came with the orginal case and all the accessories and the key for the case they wanted $400 and looks like someone bought it and put it away in the case I have tried using a couple of times and just can not get used to it really like my IDT and needle down option on my Pfaff 2030. Good luck
#27
Super Member
Join Date: Jun 2011
Location: Illinois
Posts: 9,018
Geri, It sounds like you should probably be adjusting the bobbin case tension at this point. Your aim should be to have the stitch balanced at about 4.5 when the machine is threaded with 50 weight thread.
I use a 1oz weight, tie it to the bobbin thread and hang it from the bobbin in the bobbin case. The thread should be -just- ready to come out of the bobbin case when you turn the case vertical. If that's where it's set to, someone disassembled the top tension and didn't set it right. There are instructions in the manual for that.
The manual can be found here:
http://ismacs.net/free-sewing-machine-manuals-list.html
There are 12 of them to pick from.
I use a 1oz weight, tie it to the bobbin thread and hang it from the bobbin in the bobbin case. The thread should be -just- ready to come out of the bobbin case when you turn the case vertical. If that's where it's set to, someone disassembled the top tension and didn't set it right. There are instructions in the manual for that.
The manual can be found here:
http://ismacs.net/free-sewing-machine-manuals-list.html
There are 12 of them to pick from.
Thread
Thread Starter
Forum
Replies
Last Post
cabbagepatchkid
For Vintage & Antique Machine Enthusiasts
23
10-19-2017 06:42 PM
craftybear
For Vintage & Antique Machine Enthusiasts
1159
10-01-2016 11:14 AM