Fixing Featherweight Tension Issues
#1
Member
Thread Starter
Join Date: Jul 2014
Posts: 35
Fixing Featherweight Tension Issues
Last night I was working on a Featherweight with tension issues. I thought some might find is useful to have a list of things to check when working on tension issues:
1) Check to make sure the machine is properly threaded
[ATTACH=CONFIG]488542[/ATTACH]
detailed pictures here:
http://www.april1930s.com/html/how_t...r_feather.html
2) Flat side of needle should be facing left if you are sitting in front of the machine
[ATTACH=CONFIG]488540[/ATTACH]
3) Thread should go in through the right side of the needle
4) Make sure bobbin case is properly threaded
[ATTACH=CONFIG]488539[/ATTACH]
5) The position finger on the bobbin case is the notch of the throat plate
[ATTACH=CONFIG]488541[/ATTACH]
6) Make sure bobbin case tension is not too loose or too tight
more info here:
http://www.archaicarcane.com/tear-it...e-maintenance/
7) Make sure upper tension knob is correctly assembled
[ATTACH=CONFIG]488544[/ATTACH]
more info here on tension assembly:
http://www.april1930s.com/html/tensi...er_sewing.html
8) Check for thread nest behind the bobbin carrier
more info here:
http://mysewingmachineobsession.blog...bbin-case.html
I resolved my tension issues by tightening the tension on the bobbin case, so I stopped hunting for tension causing issues. Please list other causes of tension issues (and their solutions).
1) Check to make sure the machine is properly threaded
[ATTACH=CONFIG]488542[/ATTACH]
detailed pictures here:
http://www.april1930s.com/html/how_t...r_feather.html
2) Flat side of needle should be facing left if you are sitting in front of the machine
[ATTACH=CONFIG]488540[/ATTACH]
3) Thread should go in through the right side of the needle
4) Make sure bobbin case is properly threaded
[ATTACH=CONFIG]488539[/ATTACH]
5) The position finger on the bobbin case is the notch of the throat plate
[ATTACH=CONFIG]488541[/ATTACH]
6) Make sure bobbin case tension is not too loose or too tight
more info here:
http://www.archaicarcane.com/tear-it...e-maintenance/
7) Make sure upper tension knob is correctly assembled
[ATTACH=CONFIG]488544[/ATTACH]
more info here on tension assembly:
http://www.april1930s.com/html/tensi...er_sewing.html
8) Check for thread nest behind the bobbin carrier
more info here:
http://mysewingmachineobsession.blog...bbin-case.html
I resolved my tension issues by tightening the tension on the bobbin case, so I stopped hunting for tension causing issues. Please list other causes of tension issues (and their solutions).
Thread
Thread Starter
Forum
Replies
Last Post
fktsewing
For Vintage & Antique Machine Enthusiasts
4
09-14-2017 05:43 AM
josykatz
Main
6
01-26-2013 01:48 PM