Help with Singer 66 feed dog problem
#1
Help with Singer 66 feed dog problem
Was sewing along fine, but feed dogs quit pulling fabric. They jiggle up and down a bit but do not pull from front to back. We have oiled, greased and cleaned what we can but to no avail.
What are we missing? (One note, I did twist the end to wind a bobbin) End is twisted back and needle goes up and down, but no feed dog action.
Any help of tips to get it moving again?
Thanks all.
What are we missing? (One note, I did twist the end to wind a bobbin) End is twisted back and needle goes up and down, but no feed dog action.
Any help of tips to get it moving again?
Thanks all.
#2
Senior Member
Join Date: May 2012
Posts: 911
stitch length set on zero ?
read this on about page 6 it tells you how to set feed dog height, that could have slipped.
http://parts.singerco.com/IPinstManuals/66.pdf
read this on about page 6 it tells you how to set feed dog height, that could have slipped.
http://parts.singerco.com/IPinstManuals/66.pdf
Thread
Thread Starter
Forum
Replies
Last Post
Beautiful_Sound
For Vintage & Antique Machine Enthusiasts
4
12-13-2015 06:13 PM
jmabby
For Vintage & Antique Machine Enthusiasts
15
01-11-2015 06:22 PM
Mom3
For Vintage & Antique Machine Enthusiasts
1
04-04-2013 06:45 PM