Look what I finally got
#1
Look what I finally got
Well, I have been looking at this 201-2 for a couple of months. Thanks for all the help from J Miller and Cognito in particular, but others have given lots of help too. I really appreciate it. Well, the seller emailed me and said that she wanted me to have the machine, because she knew it would have a good home, and she gave me a great price... so here it is..... yeah,
The wiring seems good, and I spent yesterday oiling and a little cleaning. It sews like a dream... Just one little problem so far. When I wind the bobbin, it winds fast and well for the first very little bit, then slows to almost nothing. I think the rubber gasket might be worn... any other suggestions. There is an adjustment, but I can't get the screw loose... also I think it is already all the way to the wheel. Can and where can I get a new gasket, or any other suggestions.
Thanks again to everyone.... Can I wind the bobbins on another machine? Silly question, I suppose, but not sure if it is ok. thanks. Sally
The wiring seems good, and I spent yesterday oiling and a little cleaning. It sews like a dream... Just one little problem so far. When I wind the bobbin, it winds fast and well for the first very little bit, then slows to almost nothing. I think the rubber gasket might be worn... any other suggestions. There is an adjustment, but I can't get the screw loose... also I think it is already all the way to the wheel. Can and where can I get a new gasket, or any other suggestions.
Thanks again to everyone.... Can I wind the bobbins on another machine? Silly question, I suppose, but not sure if it is ok. thanks. Sally
#2
Nice! Of course you can wind bobbins on another machine. You can also order a new bobbin winder tire from Sew-Classic's website. The tires are very inexpensive and while you are waiting for it to arrive clean the winder really well and it should have an oil hole to add a drop of oil and make sure it turns freely. It could just be gunked up. Most of my machines need new wider tires..they are either cracked and old and hard and slick so they don't turn well.
Congrats on the new machine!
Congrats on the new machine!
#4
Super Member
Join Date: Oct 2013
Location: Centralia, WA, USA
Posts: 4,890
Nice get! I don't own one yet but the 201 is supposed to be one of Singer's best stitchers.
Like Mrs. SewnSew said, new tires are cheap and available at Sew-Classic. You might want to get your bobbins from there too. I've had trouble with the Singer branded bobbins available at the big stores like Walmart not fitting the vintage bobbin winders correctly due to the rims being too narrow. There is a visible difference between new and vintage bobbins.
Rodney
Like Mrs. SewnSew said, new tires are cheap and available at Sew-Classic. You might want to get your bobbins from there too. I've had trouble with the Singer branded bobbins available at the big stores like Walmart not fitting the vintage bobbin winders correctly due to the rims being too narrow. There is a visible difference between new and vintage bobbins.
Rodney
#5
I was lucky... there were about 20 bobbins in the drawer... I haven't looked at all of them... but assume they will do.... What about needles.... ? any Singer needle or should they be something special?
#9
Banned
Join Date: Aug 2014
Location: Victorian Sweatshop Forum
Posts: 4,096
I grew up sewing with a vintage Brother so I had never used a Singer. A few years ago spotted a black Singer that just called my name so I took it home knowing nothing about it. It's a 201-2 I named Elizabeth and it's one of two machines I'm going to be buried with. Yes I CAN take it with me. I'm not a Singer gal but this machine is my exception.
Cari
#10
Super Member
Join Date: May 2010
Location: Round Rock,Texas
Posts: 6,135
The 201 is a wonderful machine. I have the hand crank version, 201-4, I treadle it(remove hand crank, place in treadle cabinet). It is so quiet, as long as I remember to oil everything. The grandkids were piecing quilt blocks when this picture was taken, they liked the hand crank.
Sharon in Texas
Sharon in Texas
Thread
Thread Starter
Forum
Replies
Last Post
BARES
For Vintage & Antique Machine Enthusiasts
21
03-15-2016 07:38 PM
sandpat
General Chit-Chat (non-quilting talk)
24
05-21-2009 04:33 PM