Go Back  Quiltingboard Forums >
  • Main
  • For Vintage & Antique Machine Enthusiasts
  • question about mismatched machine/treadle >
  • question about mismatched machine/treadle

  • question about mismatched machine/treadle

    Thread Tools
     
    Old 01-19-2013, 08:50 AM
      #1  
    Super Member
    Thread Starter
     
    DogHouseMom's Avatar
     
    Join Date: Jan 2011
    Location: Knot Merrill, Southern Indiana
    Posts: 5,781
    Default question about mismatched machine/treadle

    It just occurred to me that I might be doing something that can't be done.

    Can any treadle machine be used with any treadle irons??

    I purchased an old 66 red-eye some time ago, cabinet needed a lot of work (so did the machine). After that, I purchsed a 115 head without a cabinet figuring I already have a cabinet and treadle irons. My plan was to refinish the irons (done - sandblasted, repainted and reassembled) and to make a new top which will just be a flat top with a hole in it to fit the machine flush with the base and drop a coffin top over it. The hole in the top will be made to fit my 115.

    Will the treadle irons from the 66 work with the 115??

    Next question ... eventually we want the 66 set up as well, and we will do something similar by getting irons and building a cabinet around it. My husband is looking at irons for all different kinds of machines, not necessarily Singers. Will they work with the 66???

    It hadn't occurred to me until now (I know ... dumb) that some of my plans might not work.

    On another note ... I have a road trip tomorrow to pick up a new member for my developing family of vintage machines. Fortunately I don't have to do anything to this machine ... it runs, pristine condition (machine, cabinet and irons) and tons of extra goodies with it which I understand are hard to come by for an 1869 W&W #8!! I'm sew excited!! Will post pictures once's he's home
    DogHouseMom is offline  
    Old 01-19-2013, 03:08 PM
      #2  
    Junior Member
     
    makitmama's Avatar
     
    Join Date: Jul 2012
    Location: Tidewater, VA
    Posts: 264
    Default

    I have swapped irons and machines around twice now. I had to be obsessive about the cabinet hinges, and about how the irons lined up with the machine- the belt needs to be vertical and not slanted. Once I got those two things taken care of I had no problem.
    makitmama is offline  
    Old 01-19-2013, 05:52 PM
      #3  
    Super Member
    Thread Starter
     
    DogHouseMom's Avatar
     
    Join Date: Jan 2011
    Location: Knot Merrill, Southern Indiana
    Posts: 5,781
    Default

    Thanks Makit
    DogHouseMom is offline  
    Old 01-20-2013, 12:39 AM
      #4  
    Member
     
    Join Date: Dec 2012
    Posts: 31
    Default

    The 115 should drop right into a cabinet that a 66 came out of. The bed is the same size and the hinges line up.
    Neighmond is offline  
    Old 01-20-2013, 06:08 AM
      #5  
    Super Member
     
    lovelyl's Avatar
     
    Join Date: Apr 2011
    Location: SW Ohio
    Posts: 2,103
    Default

    Hi, Sue! You shouldn't have any problems putting the 115 into the 66 treadle cabinet. I have a 66 in the cabinet that your 115 (Gretel) came out of! I hope you enjoy her as much as I did before she moved in with you!
    lovelyl is offline  
    Old 01-20-2013, 03:54 PM
      #6  
    Super Member
    Thread Starter
     
    DogHouseMom's Avatar
     
    Join Date: Jan 2011
    Location: Knot Merrill, Southern Indiana
    Posts: 5,781
    Default

    Originally Posted by lovelyl
    Hi, Sue! You shouldn't have any problems putting the 115 into the 66 treadle cabinet. I have a 66 in the cabinet that your 115 (Gretel) came out of! I hope you enjoy her as much as I did before she moved in with you!
    Linda!! Thanks!! And yes indeed it is Gretel that I'm looking to FINALLY put into a base!! Thanks for the info. Will continue with plans as soon as hubby is finished with the top.
    DogHouseMom is offline  
    Old 01-20-2013, 08:56 PM
      #7  
    Super Member
     
    Join Date: May 2010
    Location: Round Rock,Texas
    Posts: 6,135
    Default

    Hi Doghousemom,
    I have a mismatched set of irons and top. The top is from a Singer coffin top and the irons are Elgin, the pair work just fine together. I have 6 Singer treadle heads that I can put in this treadle cabinet.
    The current resident of this cabinet is my 1914 Singer 115-1, we're making log cabin blocks. I just took the 66-1 red eye out and put the 115-1, no problem at all the bed is the same size and hinges line up just fine.
    Sharon
    Singers 66-1 red eye(2),15-90,115-1,201K,306W
    Attached Thumbnails 002.jpg  

    Last edited by purplefiend; 01-20-2013 at 08:59 PM. Reason: added text
    purplefiend is offline  
    Related Topics
    Thread
    Thread Starter
    Forum
    Replies
    Last Post
    carol45
    Main
    52
    03-07-2014 11:56 AM
    grma33
    Pictures
    26
    03-19-2013 05:44 AM
    greywuuf
    For Vintage & Antique Machine Enthusiasts
    16
    04-06-2012 03:49 PM
    QuiltinPaws
    Main
    60
    01-22-2011 02:59 PM
    craftybear
    Links and Resources
    0
    12-03-2010 09:11 PM

    Posting Rules
    You may not post new threads
    You may not post replies
    You may not post attachments
    You may not edit your posts

    BB code is On
    Smilies are On
    [IMG] code is On
    HTML code is Off
    Trackbacks are Off
    Pingbacks are Off
    Refbacks are Off



    FREE Quilting Newsletter