Vintage Sewing Machine Shop.....Come on in and sit a spell
I think the lines between hobby and business ARE blurred. If it is to be a business, it needs some sort of organization to it or it could get out of hand and crazy. I have been looking at how to best tag a machine - what needs to go on a tag??? they come in and then I don't know what is going on in another month. I don't need to be looking them over more than once I guess. Some times I just don't have time to fool with something or don't have a certain part. I try to order parts all at once to save postage. Some times I take a day just to work on tensions that need to be torn down. That way I keep in practice. There are different types of tensions, too. I think there is just so much to learn about the machines. I doubt if anybody ever learns all of it. I've seen the repair man get stumped. I know the repair man knows basics and then has to look up what he doesn't know specific to a machine - too many odd machines out there aren't there.
Bottom line, find something that works for you, how you process information, and that you'll actually use all the time.
My Grammy used to keep spiral notebooks with all her antique/collectible plates in them. She had about 3 or 4 of them filled up (the family quit counting after going through 200 plates with tons more left to divvy up--I really hope I don't end up with that many VSMs). She'd put a little sticker with the number of the notebook and the page number on the plate. In the book, she'd write down what she paid for it, the date she bought it, information about the markings/decorations, and anything she could find on valuation with the reference where she found it. She kept this up for at least 20 years!
Power Poster
Join Date: Mar 2011
Location: Somewhere
Posts: 15,506
for me it needs to be very simple
Another idea, make yourself a pre-printed checklist with the things you do/look over on each machine and pertinent information you need (like costs). That way you could check them off when done and wouldn't repeat doing things. You could leave space between each item so that you could make notes on problems. Keep that with the individual machine.
Can you tell I have a list-making, writing-it-down personality?
Can you tell I have a list-making, writing-it-down personality?
A note about patent dates on our machines. All these really tell us is that our machine was made AFTER that date...could be days, months, or years....the patent date is never for the whole machine, but is instead for some feature of the machine...anything from the take up lever to the spool pin....
I think the W&W 9 came out in 1892...was produced until 1905 when Singer bought out W&W and to use up old parts manufactured the Singer W9, until about 1912.
I think the W&W 9 came out in 1892...was produced until 1905 when Singer bought out W&W and to use up old parts manufactured the Singer W9, until about 1912.
Super Member
Join Date: Nov 2010
Location: Cadillac, MI
Posts: 6,487
The foot control on my Emerson (Japanese machine made by Brother that looks like a Necchi with Art Deco trim) just died. It's an odd arrangement - a single cord comes out of the motor and intersects with a little box with spots for the machine and light (the machine has no light) to plug into. The foot control wired into box. If I can find a foot control from a donor machine, getting it attached will be tricky. The terminals are not screws, but tapped in looking things. Grrr.
Question for those of you switching machines. Do you have any problems doing so? I have been sewing on a 301 and now have started using a 15 and I am off my drawn line. I've had to resew almost every one. Cure? Switch the 1/4" guide to the 15 and use the 301 for the snowball corners, I guess.
Question for those of you switching machines. Do you have any problems doing so? I have been sewing on a 301 and now have started using a 15 and I am off my drawn line. I've had to resew almost every one. Cure? Switch the 1/4" guide to the 15 and use the 301 for the snowball corners, I guess.
Senior Member
Join Date: Oct 2010
Location: PA
Posts: 334
Super Member
Join Date: Feb 2012
Posts: 8,091
Irish Rose,
The wiring set up you described is typical and common. Once you have the dead foot controller apart all you need to do is clip the wires close to the original connections and then attach them to the new screws on the replacement foot controller. I actually solder ring connections to the wires so I get a much cleaner and stronger connection.
Foot controllers can be had at many places on line as well as your local dealer.
I have over 20 machines to sew on. From ancient to almost modern. Each of them has their own personalities and quirks. So when switching from one to the other I usually sew a bit on some scrap to re-familiarize myself with the one I'm using.
Joe
The wiring set up you described is typical and common. Once you have the dead foot controller apart all you need to do is clip the wires close to the original connections and then attach them to the new screws on the replacement foot controller. I actually solder ring connections to the wires so I get a much cleaner and stronger connection.
Foot controllers can be had at many places on line as well as your local dealer.
I have over 20 machines to sew on. From ancient to almost modern. Each of them has their own personalities and quirks. So when switching from one to the other I usually sew a bit on some scrap to re-familiarize myself with the one I'm using.
Joe
Super Member
Join Date: Jan 2010
Location: Outer Space
Posts: 9,319
The foot control on my Emerson (Japanese machine made by Brother that looks like a Necchi with Art Deco trim) just died. It's an odd arrangement - a single cord comes out of the motor and intersects with a little box with spots for the machine and light (the machine has no light) to plug into. The foot control wired into box. If I can find a foot control from a donor machine, getting it attached will be tricky. The terminals are not screws, but tapped in looking things. Grrr.
Question for those of you switching machines. Do you have any problems doing so? I have been sewing on a 301 and now have started using a 15 and I am off my drawn line. I've had to resew almost every one. Cure? Switch the 1/4" guide to the 15 and use the 301 for the snowball corners, I guess.
Question for those of you switching machines. Do you have any problems doing so? I have been sewing on a 301 and now have started using a 15 and I am off my drawn line. I've had to resew almost every one. Cure? Switch the 1/4" guide to the 15 and use the 301 for the snowball corners, I guess.
You shouldn't switch machines while piecing. The 1/4" guide will vary from machine to machine because the needle placement on every machine will vary to the edge of the guide. Some will be too large, some dead on and some scant. It's always best to start a project on a machine and stick with it until finished piecing.
Super Member
Join Date: Nov 2010
Location: Cadillac, MI
Posts: 6,487
Duh, sort of like replacing the plug on a lamp only I will be replacing a foot controller. That's a relief. My capabilities don't include figuring out how to rewire the interesting arrangement further up. I'm afraid of electricity so I haven't learned much about it. Thank you for the info - now to find an inexpensive foot controller.
Candace, I agree if I were doing all 1/4" seams. I set up the second machine because when sewing the snowball triangles, the guide screwed to the 301 gets in the way. This way I can do snowballs on one machine and nine patches on the other. I think I will switch them so I have the 301's increased visibility to find that line across the square. On the other hand, I just worked on a auction quilt with two other sewers. We had my 301, a plastic Singer maybe 20 years old and a fancy new machine whose 1/4" was set by pushing a button. Our blocks were all perfect when we put the quilt together.
Candace, I agree if I were doing all 1/4" seams. I set up the second machine because when sewing the snowball triangles, the guide screwed to the 301 gets in the way. This way I can do snowballs on one machine and nine patches on the other. I think I will switch them so I have the 301's increased visibility to find that line across the square. On the other hand, I just worked on a auction quilt with two other sewers. We had my 301, a plastic Singer maybe 20 years old and a fancy new machine whose 1/4" was set by pushing a button. Our blocks were all perfect when we put the quilt together.
Last edited by irishrose; 02-12-2012 at 04:06 PM.
You shouldn't switch machines while piecing. The 1/4" guide will vary from machine to machine because the needle placement on every machine will vary to the edge of the guide. Some will be too large, some dead on and some scant. It's always best to start a project on a machine and stick with it until finished piecing.
Thread
Thread Starter
Forum
Replies
Last Post
Stitchnripper
Main
5
10-17-2018 09:01 AM
AngieS
Main
38
10-06-2011 10:06 PM
craftybear
Offline Events, Announcements, Discussions
34
09-09-2011 12:36 PM