Vintage Sewing Machine Shop.....Come on in and sit a spell
Super Member
Join Date: Feb 2012
Posts: 8,091
Light: I fight with small flash lights for up close detail work, and clamp on lights with the twisty 100 watt equivalent neon blubs.
Knobs: I have a bunch of Kenmores and so far no stuck nobs. Just one machine with a cranky top tension. I guess I'd just use the Tri-Flow oil or a good penetrating oil with some gentle persuasion until it surrenders and frees up. I have a 3 # hammer I can threaten them with if needed.
ATF: Won't hurt blue paint or any other color either. Just don't leave the machine idling in gear ...... LOL
Tensions: I usually do take them apart, clean and adjust them, after I've done everything else and test run it. I have a Singer 328 I just finished most of it's cleaning and the tension disks are rusty. BUT ..... for some reason the tension is good. At some point I'll have to take it apart and clean and polish, or replace the disks, for for now, it ain't broke, so I ain't gonna fix it.
Smoke belching blue clone: I'll bet something is bent and binding. Smoke from the nose???????????? Is there a light in that area? If not that bent throat plate makes me want to think somethings bent and really binding up.
Joe
Knobs: I have a bunch of Kenmores and so far no stuck nobs. Just one machine with a cranky top tension. I guess I'd just use the Tri-Flow oil or a good penetrating oil with some gentle persuasion until it surrenders and frees up. I have a 3 # hammer I can threaten them with if needed.
ATF: Won't hurt blue paint or any other color either. Just don't leave the machine idling in gear ...... LOL
Tensions: I usually do take them apart, clean and adjust them, after I've done everything else and test run it. I have a Singer 328 I just finished most of it's cleaning and the tension disks are rusty. BUT ..... for some reason the tension is good. At some point I'll have to take it apart and clean and polish, or replace the disks, for for now, it ain't broke, so I ain't gonna fix it.
Smoke belching blue clone: I'll bet something is bent and binding. Smoke from the nose???????????? Is there a light in that area? If not that bent throat plate makes me want to think somethings bent and really binding up.
Joe
Power Poster
Join Date: Mar 2011
Location: Somewhere
Posts: 15,506
I noticed that you can't get that lamp anymore. The one I have is the clamp on one like it. The light is great - the switch is garbage and the clamp is a PITB.
I'm interested in this too... my Singer 27 VS2 with the sphynx decals is in almost perfect condition, but the decals have rubbed off in just a couple of places so I'm wondering if it would be good just to touch them up a little and then they would be absolutely perfect - is that the done thing, or not??
Anyway, my query in relation to your response Glenn, which may be silly - but isn't the black paint black japan? Is there a reason why you wouldn't use this? I only ask because I have heaps left over from doing our floors and I presumed it was the same stuff.
Anyway, my query in relation to your response Glenn, which may be silly - but isn't the black paint black japan? Is there a reason why you wouldn't use this? I only ask because I have heaps left over from doing our floors and I presumed it was the same stuff.
I think a little turps is all you need to thin and you can get in small bottles at the same place you get the paint. No need to buy a big can of thinner it just takes a very small amount. After mixing the dye with the alcohol use shellac as the binder to make a black paint so to speak so you can apply it. If you have any questions during the process just ask away. I am glad to help anytime.
Skip
Skip
Super Member
Join Date: Mar 2010
Location: Huntsville, AL
Posts: 2,609
I'm interested in this too... my Singer 27 VS2 with the sphynx decals is in almost perfect condition, but the decals have rubbed off in just a couple of places so I'm wondering if it would be good just to touch them up a little and then they would be absolutely perfect - is that the done thing, or not??
Anyway, my query in relation to your response Glenn, which may be silly - but isn't the black paint black japan? Is there a reason why you wouldn't use this? I only ask because I have heaps left over from doing our floors and I presumed it was the same stuff.
Anyway, my query in relation to your response Glenn, which may be silly - but isn't the black paint black japan? Is there a reason why you wouldn't use this? I only ask because I have heaps left over from doing our floors and I presumed it was the same stuff.
Power Poster
Join Date: Mar 2011
Location: Somewhere
Posts: 15,506
Light:
Knobs: I have a bunch of Kenmores and so far no stuck nobs. Just one machine with a cranky top tension. I guess I'd just use the Tri-Flow oil or a good penetrating oil with some gentle persuasion until it surrenders and frees up. I have a 3 # hammer I can threaten them with if needed.
ATF: Won't hurt blue paint or any other color either. Just don't leave the machine idling in gear ...... LOL
Joe
Knobs: I have a bunch of Kenmores and so far no stuck nobs. Just one machine with a cranky top tension. I guess I'd just use the Tri-Flow oil or a good penetrating oil with some gentle persuasion until it surrenders and frees up. I have a 3 # hammer I can threaten them with if needed.
ATF: Won't hurt blue paint or any other color either. Just don't leave the machine idling in gear ...... LOL
Joe
I shoot up all the moving parts, too - something must be getting missed. There is very limited access to some of them.
Most of the knobs now work - probably all but one on each machine.
Power Poster
Join Date: Mar 2011
Location: Somewhere
Posts: 15,506
A hammer won't help at all - probably bend the shaft or break something. I have had them soaking in T-F for months. Every once in a while I shoot them up again...
I shoot up all the moving parts, too - something must be getting missed. There is very limited access to some of them.
Most of the knobs now work - probably all but one on each machine.
I shoot up all the moving parts, too - something must be getting missed. There is very limited access to some of them.
Most of the knobs now work - probably all but one on each machine.
Super Member
Join Date: Feb 2012
Posts: 8,091
Miriam,
The hammer comment was a joke ..... you know, HA HA, that kind of comment. Although the one with the cranky top tension was darn close to meeting with Mr. Hammer at one point.
Blue Clone with the smoke and squeal. Could there be thread wrapped around the shafts behind the face plate? I've dug lots of thread out and that would and could cause trouble.
Just a thought.
Joe
The hammer comment was a joke ..... you know, HA HA, that kind of comment. Although the one with the cranky top tension was darn close to meeting with Mr. Hammer at one point.
Blue Clone with the smoke and squeal. Could there be thread wrapped around the shafts behind the face plate? I've dug lots of thread out and that would and could cause trouble.
Just a thought.
Joe
Power Poster
Join Date: Mar 2011
Location: Somewhere
Posts: 15,506
Miriam,
The hammer comment was a joke ..... you know, HA HA, that kind of comment. Although the one with the cranky top tension was darn close to meeting with Mr. Hammer at one point.
Blue Clone with the smoke and squeal. Could there be thread wrapped around the shafts behind the face plate? I've dug lots of thread out and that would and could cause trouble.
Just a thought.
Joe
The hammer comment was a joke ..... you know, HA HA, that kind of comment. Although the one with the cranky top tension was darn close to meeting with Mr. Hammer at one point.
Blue Clone with the smoke and squeal. Could there be thread wrapped around the shafts behind the face plate? I've dug lots of thread out and that would and could cause trouble.
Just a thought.
Joe
Happy Easter to all! I awoke to sunny weather this morning, not a cloud in the sky. The weather forecast earlier this week was for rain on Sunday. Last night there were thunderstorms; so, I presumed that it would be raining this morning. I'm sharing with you my wisteria that are right now blooming in my garden, a bit of spring for those that still have winter.
[ATTACH=CONFIG]405490[/ATTACH]
May your day be filled with fun, either tinkering with the vintage machines or sewing pretty quilts for someone to cuddle under. A prayer goes out to all, those present and those no longer with us. Peace
[ATTACH=CONFIG]405490[/ATTACH]
May your day be filled with fun, either tinkering with the vintage machines or sewing pretty quilts for someone to cuddle under. A prayer goes out to all, those present and those no longer with us. Peace
Junior Member
Join Date: Mar 2012
Location: San francisco Bay Area
Posts: 249
I noticed that you can't get that lamp anymore. The one I have is the clamp on one like it. The light is great - the switch is garbage and the clamp is a PITB.[/QUOTE]
OH NO! I love that lamp! I should have bought more than two! I'll keep an eye out at my local IKEA and see if it comes back into stock.........Laura
OH NO! I love that lamp! I should have bought more than two! I'll keep an eye out at my local IKEA and see if it comes back into stock.........Laura
Thread
Thread Starter
Forum
Replies
Last Post
Stitchnripper
Main
5
10-17-2018 09:01 AM
AngieS
Main
38
10-06-2011 10:06 PM
craftybear
Offline Events, Announcements, Discussions
34
09-09-2011 12:36 PM